Sponsored Content
Operating Systems HP-UX Number of Disk Mirrored in HP-UX Post 48155 by fpmurphy on Friday 27th of February 2004 10:13:18 AM
Old 02-27-2004
Use lvdisplay to view each logical volume. You can do this
from the command line or within SAM

For example:

# lvdisplay /dev/vg00/lvol1

LV Name /dev/vg00/lvol1
VG Name /dev/vg00
LV Permission read/write
LV Status available/syncd
Mirror copies 0
Consistency Recovery MWC
Schedule parallel
LV Size (Mbytes) 512
Current LE 64
Allocated PE 64
Stripes 0
Stripe Size (Kbytes) 0
Bad block off
Allocation strict/contiguous
IO Timeout (Seconds) default

The "Mirror copies" output tells you if the logical volume is
mirrored or not. In the above example it is not.
 

10 More Discussions You Might Find Interesting

1. AIX

Mirrored disk.....

How do I know, which all disks are mirrored? any command? Bala (7 Replies)
Discussion started by: balaji_prk
7 Replies

2. UNIX for Dummies Questions & Answers

Creating create mirrored disk files systems using mkfs command

What is the correct mkfs syntax to create mirrored disk files systems? I need to make the file system 20gb. For example: machine# mkfs -F ufs /dev/md/dsk/d40 size not specified ufs usage: mkfs special size(sectors) \ -m : dump fs cmd line used to make this partition -V : print this... (4 Replies)
Discussion started by: GLJ@USC
4 Replies

3. UNIX for Dummies Questions & Answers

Solaris 10 not booting with mirrored disk

Hi all, I have a V490 running with Solaris 10. The OS disk was mirrored. I wanted to break the mirror, boot with the secondary mirror, and re-mirror the OS with a new disk. This is what I did, detached the metadevices of the secondary mirror disk (disk 1) metaclear-ed the metadevices,... (1 Reply)
Discussion started by: nitinp82
1 Replies

4. Solaris

Remove os mirrored disk Solaris 10

Hello once again seeking your help, I have a mirrored disk and need to unmirror it to mount it as a new file system (/export) but could not find the correct steps to do it with out affecting the original disk. can anybody point me out on how to get this done. Thanks!! (3 Replies)
Discussion started by: AQG
3 Replies

5. UNIX for Dummies Questions & Answers

Number of Inode on a disk

How we can know number of inode present in my Disk including free and occupied. Is there any tool or program to know how much free inode are there in inode free list . (2 Replies)
Discussion started by: mr_deb
2 Replies

6. UNIX for Advanced & Expert Users

how to create multiple-boot system with disks mirrored(RAID1+0) and disk alone

I have a HP proliant ML 570 G3 with two 146GB disk drives mirrored(RAID1+0) windows server 2003 was installed on that disk. I will add a disk.(scsi 300GB) I will install Linux on that additional disk. I want to create multiple-boot system. Is it possible? I wanna know how to create... (0 Replies)
Discussion started by: lifegeek
0 Replies

7. Solaris

Boot from Mirrored disk

So I have mirrored disk already set up from c1t0d0 to c1t1d0. Is there some special procedures that I need to do before I do and then try to boot from the mirrored disk? I am using a V490 if that helps... (7 Replies)
Discussion started by: drew_1980
7 Replies

8. Solaris

Need help replacing a mirrored boot disk

I have a v480 with a mirrored boot disk c1t0 and c1t1. The drives themselves don't show a failure but the mirror's need maintenance. This is my plan for replacing the drive. I would love feedback to point out what I"m missing or where my steps are incorrect. Two things I believe I'm... (3 Replies)
Discussion started by: pcoffey
3 Replies

9. Red Hat

Booting 2nd mirrored boot disk

Hi guys, thanks for helping out. If you have two boot disk mirrored and your primary boot disk fails, how will you boot the system from the second disk? Thank you very much for your assistance on this matter. Arrey (5 Replies)
Discussion started by: cjashu
5 Replies

10. AIX

Disk model number

Hi Please let me know how to check disk model number. I have already tried prtconf command but there is no such information related to model number. Regards, Scriptor (3 Replies)
Discussion started by: scriptor
3 Replies
LVDISPLAY(8)						      System Manager's Manual						      LVDISPLAY(8)

NAME
lvdisplay - display attributes of a logical volume SYNOPSIS
lvdisplay [-c|--colon] [-d|--debug] [-h|-?|--help] [--ignorelockingfailure] [--maps] [-P|--partial] [-v|--verbose] LogicalVolumePath [Logi- calVolumePath...] DESCRIPTION
lvdisplay allows you to see the attributes of a logical volume like size, read/write status, snapshot information etc. lvs (8) is an alternative that provides the same information in the style of ps (1). lvs is recommended over lvdisplay. OPTIONS
See lvm for common options. -c, --colon Generate colon separated output for easier parsing in scripts or programs. N.B. lvs (8) provides considerably more control over the output. The values are: * logical volume name * volume group name * logical volume access * logical volume status * internal logical volume number * open count of logical volume * logical volume size in sectors * current logical extents associated to logical volume * allocated logical extents of logical volume * allocation policy of logical volume * read ahead sectors of logical volume * major device number of logical volume * minor device number of logical volume -m, --maps Display the mapping of logical extents to physical volumes and physical extents. Examples "lvdisplay -v /dev/vg00/lvol2" shows attributes of that logical volume. If snapshot logical volumes have been created for this original logical volume, this command shows a list of all snapshot logical volumes and their status (active or inactive) as well. "lvdisplay /dev/vg00/snapshot" shows the attributes of this snapshot logical volume and also which original logical volume it is associated with. SEE ALSO
lvm(8), lvcreate(8), lvscan(8) Sistina Software UK LVM TOOLS 2.02.44-cvs (02-17-09) LVDISPLAY(8)
All times are GMT -4. The time now is 09:39 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy