01-29-2004
fastethernet issue w/ my ultra2
hmm, this is an odd one. i have an additional fastethernet card in my
ultra2 (w/solaris9). it's acting up.
when i rebooted, the nic was intermittant in response. here's the output:
------------------
Request timed out.
Request timed out.
Request timed out.
Reply from 192.168.200.4: bytes=32 time=2ms TTL=255
Reply from 192.168.200.4: bytes=32 time<1ms TTL=255
Request timed out.
Reply from 192.168.200.4: bytes=32 time=1ms TTL=255
Reply from 192.168.200.4: bytes=32 time<1ms TTL=255
Request timed out.
Reply from 192.168.200.4: bytes=32 time<1ms TTL=255
Request timed out.
Reply from 192.168.200.4: bytes=32 time<1ms TTL=255
Request timed out.
Reply from 192.168.200.4: bytes=32 time<1ms TTL=255
Reply from 192.168.200.4: bytes=32 time<1ms TTL=255
Reply from 192.168.200.4: bytes=32 time<1ms TTL=255
Reply from 192.168.200.4: bytes=32 time<1ms TTL=255
Reply from 192.168.200.4: bytes=32 time<1ms TTL=255
Request timed out.
Request timed out.
Request timed out.
Request timed out.
----------------------
eventually, the card becomes inresponsive and doesn't respond to anything.
i've configured it properly, and the ultra2's onboard fastethernet works w/o
any hiccups.
so i don't get what's going on with this one.
is there anyway to test the hardware to see if the card's defective?
9 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
HI All,
Suddenly don't know what happened to redhat linux 7.2 any program start then itsn't listing while using ps -ef
ex: ./xyz this xyz program pid not showing in ps-ef
Pls let me know what is the reason for the same.
Thanks a lot in advance
Bache (7 Replies)
Discussion started by: bache_gowda
7 Replies
2. Shell Programming and Scripting
Hi,
I have a shell scripting. This will take 7 digit number in each line and add 7 digit number with next subsequent lines ( normal addition ).
Eg:
0000001
0000220
0001235
0000022
0000023
...........
.........
........
Like this i am having around 1500000 records. After adding... (23 Replies)
Discussion started by: thambi
23 Replies
3. HP-UX
Hello :),
I really am stuck with something, I am trying to boot my machine into single user mode (GCCS-M) but it acts like it does not recognize the key board. I have taken over the system as a pass down item and no one can fine the passwords. I don't want to reload it :(and I was wondering if... (1 Reply)
Discussion started by: Ham
1 Replies
4. UNIX for Dummies Questions & Answers
In LINUX(CentOS, RedHat) is there a way to have the banner statement appear before the logon instead of after the logon? In UNIX and Windows the banner appears before a person actually logs on, what I'm seeing in LINUX is that it appears after the login(ftp, telnet, SSH).
Thanks (0 Replies)
Discussion started by: ejjones
0 Replies
5. Solaris
hi ,
I have a Solaris server which is part of a domain. The IP for this Solaris box is allocated dyanamically by a DHCP. Everytime the solaris box is restarted the IP gets changed. Being an admin what should i do to find the new ip of the Solaris server sitting at my location? Till now i get... (2 Replies)
Discussion started by: BalajiUthira
2 Replies
6. Shell Programming and Scripting
Hello everyone, I'm in need of some assistance. I'm currently enrolled in an introductory UNIX shell programming course and, well halfway through the semester, we are receiving our first actual assignment. I've somewhat realized now that I've fallen behind, and I'm working to get caught up, but for... (1 Reply)
Discussion started by: MrMagoo22
1 Replies
7. Shell Programming and Scripting
Hi All,
I am using the below script which has awk command, but it is not returing the expected result. can some pls help me to correct the command.
The below script sample.ksh should give the result if the value of last 4 digits in the variable NM matches with the variable value DAT. The... (7 Replies)
Discussion started by: G.K.K
7 Replies
8. Shell Programming and Scripting
Hi,
when i am trying below script
assume that below values are taken in code
#!/bin/ksh
if
then
echo usage: aNlist.sh QMGR NAME MQREQ
fi
NL=`echo 'dis qmgr'|runmqsc $1|grep REPOSNL|sed 's/.*REPOSNL\(.*\).*/\1/' |cut -d'(' -f2|cut -d')' -f1`
echo 'define nl('$NL_$2')... (25 Replies)
Discussion started by: darling
25 Replies
9. Shell Programming and Scripting
Hi All,
I have a small queries to get the character count
i tried with wc -c and wc -m but its not returend current result
For eg:
wc -c
wc -m
echo "Name" | wc -c
result: 5 but actually it should returned 4
Help me on this to ge the correct one.
Thanks!
----------... (4 Replies)
Discussion started by: siva.pitchai
4 Replies
LEARN ABOUT OPENDARWIN
asip-status.pl
ASIP-STATUS.PL(1) Netatalk 2.2 ASIP-STATUS.PL(1)
NAME
asip-status.pl - Queries AFP servers for their capabilities
SYNOPSIS
asip-status.pl [-d] [-i] [-x] HOSTNAME[:PORT]
asip-status.pl -v | -version | --version
DESCRIPTION
asip-status.pl is a perl script that sends a FPGetSrvrInfo request to an AFP server at HOSTNAME:PORT and displays the results, namely
"Machine type", the server's name, supported AFP versions, UAMs and AFP flags, the "server signature" and the network addresses, the server
provides AFP services on.
When you don't supply :PORT, then the default AFP port, 548, will be used.
OPTIONS
-d
Enable debug output.
-i
Show icon if it exists.
-x
Enable hex dump output.
-v, -version, --version
Show version.
EXAMPLES
asip-status.pl 192.168.21.2
AFP reply from 192.168.21.2:548
Flags: 1 Cmd: 3 ID: 57005
Reply: DSIGetStatus
Request ID: 57005
Machine type: Macintosh
AFP versions: AFPVersion 1.1,AFPVersion 2.0,AFPVersion 2.1,AFP2.2
UAMs: Cleartxt passwrd,Randnum exchange,2-Way Randnum exchange
Flags: SupportsCopyFile,SupportsChgPwd,SupportsServerMessages,
SupportsServerSignature,SupportsTCP/IP,SupportsSuperClient
Server name: PowerMac 9600/200
Signature:
04 c1 6e 59 04 c1 6e 59 04 c1 6e 59 04 c1 6e 59 ..nY..nY..nY..nY
Network address: 192.168.21.2:548 (tcp/ip address and port)
Network address: 10.20 (ddp address)
asip-status.pl myserver:10548
AFP reply from myserver:10548
Flags: 1 Cmd: 3 ID: 57005
Reply: DSIGetStatus
Request ID: 57005
Machine type: Netatalk
AFP versions: AFPVersion 1.1,AFPVersion 2.0,AFPVersion 2.1,AFP2.2,AFPX03,
AFP3.1
UAMs: Cleartxt passwrd,Randnum exchange,2-Way Randnum exchange,DHCAST128
Flags: SupportsCopyFile,SupportsServerMessages,SupportsServerSignature,
SupportsTCP/IP,SupportsSrvrNotifications,SupportsOpenDirectory,
SupportsUTF8Servername,SupportsSuperClient
Server name: Fire V480
Signature:
83 29 cc 60 83 29 cc 60 83 29 cc 60 83 29 cc 60 .).`.).`.).`.).`
Network address: 192.168.21.1:10548 (TCP/IP address and port)
Network address: 65282.142 (ddp address)
UTF8 Servername: Fire V480
REPORTING BUGS
Report bugs to the Netatalk-devel list <netatalk-devel@lists.sourceforge.net>.
Netatalk 2.2 02 Sep 2011 ASIP-STATUS.PL(1)