01-19-2004
You should get the messages there. If you have nothing in there, then you probably don't have any errors.
9 More Discussions You Might Find Interesting
1. Filesystems, Disks and Memory
We have 6 hard disks attached to the hardware. Of this 2 hard disks are of 9 GB each.
Now I want combine both the same in such a way that i see a combined entry in the output of df -k .
The steps I follow are
1. Create partition on hard disks (Using format partition)
2. Run newfs -v for... (6 Replies)
Discussion started by: Hitesh Shah
6 Replies
2. UNIX for Dummies Questions & Answers
Can anyone tell me what Vertias is?
Is it free? What is it used for exactly?
Thank you in advance. (1 Reply)
Discussion started by: VeroL
1 Replies
3. Solaris
Hi;
I have 4 new disks in a 6120 Array attached to a SUN server running zfs.
There are already two virtual disks on the array comprising of 3 disk raid 5 for each Vdisk.
I need to add two more disks to each vdisk making each a 5 disk raid 5 Vdisk.
If ZFS already has the original... (3 Replies)
Discussion started by: myjess
3 Replies
4. Filesystems, Disks and Memory
How do I check for physical damage on red hat linux hard disks? I tried smartctl /dev/sdb but it came back so fast saying it was ok. Is there a better linux command to check for bad sectors or physical disks in linux? Is there a good way such as with parted or something else? I normally in HP... (4 Replies)
Discussion started by: taekwondo
4 Replies
5. AIX
Hello All,
Can anybody please tell me what is the maximum limit of Physical IBM Power Machine which can be handled by single HMC at a single point of time?
Thanks,
Jenish (1 Reply)
Discussion started by: jenish_shah
1 Replies
6. AIX
This is the report I got running the comand rptconf, but I would like to know what is the capacity of the disks installed into our server power 6 with AIX
System Model: IBM,7778-23X
Machine Serial Number: 1066D5A
Processor Type: PowerPC_POWER6
Processor Implementation Mode: POWER 6... (6 Replies)
Discussion started by: cucosss
6 Replies
7. Solaris
Dear Team,
This time i am facing some new problems which is beyond my thinking. I need some expert advice.
We are having 4 Servers ( 2 nos Sun SPARC Enterprise T5220 & 2 nos of SF e2900 Servers ). Both the T5220 Servers are Termed as Node A and Node B . The same things are followed with... (1 Reply)
Discussion started by: sudhansu
1 Replies
8. Red Hat
I wanted to know how we can combine volumes over 2 physical drives.
# fdisk -l
Disk /dev/sda: 42.9 GB, 42949672960 bytes
255 heads, 63 sectors/track, 5221 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 ... (16 Replies)
Discussion started by: ikn3
16 Replies
9. AIX
Hi Admins,
I am having a whole system lpar in open firmware state on HMC.
How can I bring it to running state ?
Let me know. Thanks. (2 Replies)
Discussion started by: snchaudhari2
2 Replies
LEARN ABOUT OSX
openpam_log
OPENPAM_LOG(3) BSD Library Functions Manual OPENPAM_LOG(3)
NAME
openpam_log -- log a message through syslog
LIBRARY
Pluggable Authentication Module Library (libpam, -lpam)
SYNOPSIS
#include <sys/types.h>
#include <security/pam_appl.h>
#include <security/openpam.h>
void
openpam_log(int level, const char *fmt, ...);
DESCRIPTION
The openpam_log function logs messages using syslog(3). It is primarily intended for internal use by the library and modules.
The level argument indicates the importance of the message. The following levels are defined:
PAM_LOG_DEBUG Debugging messages. These messages are logged with a syslog(3) priority of LOG_DEBUG.
PAM_LOG_VERBOSE Information about the progress of the authentication process, or other non-essential messages. These messages are logged
with a syslog(3) priority of LOG_INFO.
PAM_LOG_NOTICE Messages relating to non-fatal errors. These messages are logged with a syslog(3) priority of LOG_NOTICE.
PAM_LOG_ERROR Messages relating to serious errors. These messages are logged with a syslog(3) priority of LOG_ERR.
The remaining arguments are a printf(3) format string and the corresponding arguments.
SEE ALSO
pam(3), printf(3), syslog(3)
STANDARDS
The openpam_log function is an OpenPAM extension.
AUTHORS
The openpam_log function and this manual page were developed for the FreeBSD Project by ThinkSec AS and Network Associates Laboratories, the
Security Research Division of Network Associates, Inc. under DARPA/SPAWAR contract N66001-01-C-8035 (``CBOSS''), as part of the DARPA CHATS
research program.
BSD
December 21, 2007 BSD