01-07-2004
ignore the part about mt in my previous post, i got this
# mt -f /dev/rmt0 status
rmt0 Available 40-60-00-0,0 SCSI 8mm Tape Drive
attribute value description user_settable
mode yes Use DEVICE BUFFERS during writes True
block_size 1024 BLOCK size (0=variable length) True
extfm no Use EXTENDED file marks True
ret no RETENSION on tape change or reset True
density_set_1 39 DENSITY setting #1 True
density_set_2 39 DENSITY setting #2 True
compress yes Use data COMPRESSION True
size_in_mb 20000 Size in Megabytes False
ret_error no RETURN error on tape change or reset True
8 More Discussions You Might Find Interesting
1. AIX
Currently I have a Dell Ultrium LTO 2 Tape Drive. I am going to have a IBM AIX server. Just wonder if it is possibe to connect this tape drive to the aix server? I have Brightstor Arcserver installed on another win 2003 server. Is it possible to install the arcserve agent on the aix and use the... (1 Reply)
Discussion started by: ming413
1 Replies
2. AIX
I've just landed in a situation where an old IBM RS/6000 7025 F40 running AIX 4.2.1 has had it's tape drive fail. The tape drive in question is an HP C1533A 4mm 4GB/8GB DAT drive. It repeatedly gets write failures, and my trusty techique of whacking the cleaning tape in hasn't worked. Unfortunately... (2 Replies)
Discussion started by: phaedrus
2 Replies
3. AIX
Hi,
Help required!
How to mount internal tape drive of sun machine in AIX 5.3 (0 Replies)
Discussion started by: ashwin.krishna
0 Replies
4. AIX
Hi,
I have recently purchase a SUN Storage Tek desktop LTO 4 HH tape drive and connected to a IBM AIX 5.1 server.
The server can detect the tape device.
Can someone please advice urgently.
Thanks (4 Replies)
Discussion started by: Caully
4 Replies
5. AIX
I am trying to use this command to eject the tape
mt -f /dev/rmt/0 unload
but it gives me error
mt -f /dev/rmt/0 unload
mt: 0511-575 unload is not a recognized subcommand.
Usage: mt Subcommand
Valid subcommands are:
weof
eof
fsf
bsf
... (5 Replies)
Discussion started by: filosophizer
5 Replies
6. AIX
Hi,
The problem I have is I want to restore my AIX machine. I have created a mksysb tape from my tape drive rmt0 and I changed the bootlist using this command "bootlist -m normal rmt0 hdisk0".
However, when I display the bootlist "bootlist -om normal", it shows '-' hdisk0. I googled and... (2 Replies)
Discussion started by: AixNoob87
2 Replies
7. AIX
Hi
I need to make some restore tapes for our old AIX systems
I have purchased some DDS2 tapes and cleaning tapes
The tape drive is rmt0
what commands can I enter to run the cleaning tape through the drive
and are the any commands I can enter to test these drives
prior to using... (2 Replies)
Discussion started by: madmacher
2 Replies
8. HP-UX
I have used ioscan -fnC tape and the system identified the tape drive. what is the command to show a listing of what is on the tape? I have used ls /dev/rmt/rmt0 to no avail. can anyone help?
Thanks in advance (10 Replies)
Discussion started by: Randydog
10 Replies
LEARN ABOUT OPENSOLARIS
i286
machid(1) User Commands machid(1)
NAME
machid, sun, iAPX286, i286, i386, i486, i860, pdp11, sparc, u3b, u3b2, u3b5, u3b15, vax, u370 - get processor type truth value
SYNOPSIS
sun
iAPX286
i386
pdp11
sparc
u3b
u3b2
u3b5
u3b15
vax
u370
DESCRIPTION
The following commands will return a true value (exit code of 0) if you are using an instruction set that the command name indicates.
sun True if you are on a Sun system.
iAPX286 True if you are on a computer using an iAPX286 processor.
i386 True if you are on a computer using an iAPX386 processor.
pdp11 True if you are on a PDP-11/45tm or PDP-11/70tm.
sparc True if you are on a computer using a SPARC-family processor.
u3b True if you are on a 3B20 computer.
u3b2 True if you are on a 3B2 computer.
u3b5 True if you are on a 3B5 computer.
u3b15 True if you are on a 3B15 computer.
vax True if you are on a VAX-11/750tm or VAX-11/780tm.
u370 True if you are on an IBM(R) System/370tm computer.
The commands that do not apply will return a false (non-zero) value. These commands are often used within makefiles (see make(1S)) and
shell scripts (see sh(1)) to increase portability.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
SEE ALSO
make(1S), sh(1), test(1), true(1), uname(1), attributes(5)
NOTES
The machid family of commands is obsolete. Use uname -p and uname -m instead.
SunOS 5.11 5 Jul 1990 machid(1)