Which SCSI Adapter? Post: 43577

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

adaptec scsi host adapter

Can anyone out there help me out? I'm trying to install a scsi tape back up on a sys running sco openserver 5.0.4. When I go through the steps for mkdev tape it seems like it works, but when I reboot I still don't see the tape. Also when it boots up I get a scsi bios not installed error. I've...

2. IP Networking

LAN Adapter

Im newest in unix, Please, give me solution for installing lan adapter if driver not found in the list of ethernet drivers ihave unix driver in a dos diskete please give me the other solution and tell me where the domain of unix class online, so ican read from it. Thank's very much

3. Solaris

Trouble Installing a SCSI Adapter

Okay. I admit I'm sort of a newbie in this regard. I installed a SCSI adapter on a Sun Ultra 5 workstation. I did the standard STOP-A on the startup and got the OK prompt. I then tried probe-scsi-all. It dumps me back @ the OK prompt w/ no message whatsoever. I tried probe-scsi, nothing. ...

4. AIX

Spliting PCI-X Dual Channel Ultra320 SCSI Adapter

I have 1 PCI-X Dual Channel Ultra320 SCSI Adapter card for my p570 server. I would like to split the 2 channels for the usage of 2 tape drives in different LPARs. Is that possible? For example, I have 2 LPARs running in p570 server, LPAR-A configured the Ultra320 card as pci7 in slot...

5. HP-UX

what is an adapter?

Hi , Hi what is an adapter?what is its use ? How to log into a tibco server from unix home directory.

6. SCO

Installing LAN adapter

I inserted a PCI Realtek RTL8139 network adapter on a PC running SCO Openserver 5.0.6. I successfully loaded drivers and I'm trying to install the card with netconfig command, unfortunately without success. Here are the steps I follow to install the card: I run netconfig, from menu 'hardware'...

7. Hardware

SCSI Ultra320 80->68 adapter

I need to connect 80pin SCA Ultra320 SCSI hdd to 68pin. There are rumors that some bad "passive" adapters with problematic termination can fry the HDD. The adapter we got is Assmann ABSCA-2. Hard drive is 'Fujitsu MAW3073NC' Do we need to set any jumpers before turning it on? We already had...

8. SCO

Moving hard drive and SCSI adapter to another computer

OK group, it's been 12 years since I worked with SCO. I need some direction here: SCO Openserver 5.07 I have a server with a bad motherboard. I have moved the SCSI adapter and hard drive to another computer. This new server has different hardware so I must install the chipset drivers for...

9. HP-UX

HPUX 11.11 Sept.2003 cannot see PCI-X scsi adapter

I am trying to reload a RP4440 with 2x300gb disks and dual Port Network card, with HPUX 11.11 Sept 2003. When the os boots and and gets to the main menu to install HPUX or run recovery, it cannot find the disks or NIC. At the OS prompt (after loading files), ioscan shows the Class ba, and shows...

10. AIX

Misconfiguration detected Adapter interface name en 3 Adapter offset 0

Hi, We had a hardware problem with an IBM System p5 server, with AIX 5.2 We restore from a tape the last backup we had, but the server does not boot up as expected. The server try to mount some directories from a storage, but could not comunicate with them, we check the FC and everything is...

LEARN ABOUT NETBSD

siop

SIOP(4) 						   BSD Kernel Interfaces Manual 						   SIOP(4)

NAME

     siop -- Symbios Logic/NCR 53c8xx SCSI driver

SYNOPSIS

   hp700
     siop* at mainbus? irq 3
     siop* at phatomas? irq 3

   PCI
     siop* at pci? dev ? function ?

     options SIOP_SYMLED
     scsibus* at siop?

DESCRIPTION

     The siop driver provides support for the Symbios Logic/NCR 53x8xx series of SCSI controller chips:

	   -   53c810, 53c810a and 53c815 (Fast SCSI)
	   -   53c820, 53c825 and 53c825a (Fast-Wide SCSI)
	   -   53c860 (Ultra SCSI)
	   -   53c875 and 53c875j (Ultra-Wide SCSI)
	   -   53c876 (Dual Ultra-Wide SCSI)
	   -   53c885 (Ultra-Wide SCSI and Ethernet)
	   -   53c895 (Ultra2-Wide SCSI)
	   -   53c896 (PCI 64bit, dual Ultra2-Wide SCSI)
	   -   53c1010-33 (PCI 64bit, dual Ultra160 SCSI)
	   -   53c1510d (PCI 64bit, dual Ultra2-wide SCSI)
     The SIOP_SYMLED option causes the driver to report SCSI activity on the GPIO pin 1, which is connected to the activity LED on some adapters.
     At this time only the 53c895 based Symbios and Tekram adapters are known to require this.

     If both siop and the esiop(4) drivers are compiled, esiop(4) will take precedence for controllers it supports.

SEE ALSO

     cd(4), ch(4), esiop(4), intro(4), pci(4), scsi(4), sd(4), st(4), uk(4)

HISTORY

     The siop driver first appeared in NetBSD 1.5.

AUTHORS

     The siop driver was written by Manuel Bouyer <Manuel.Bouyer@lip6.fr> for NetBSD.

BUGS

     siop supports the 53c1010-33 in Ultra2-wide mode only.  Use esiop(4) for Ultra160 support.

BSD
								   April 5, 2008							       BSD

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

adaptec scsi host adapter

Discussion started by: goatboy_tx

2. IP Networking

LAN Adapter

Discussion started by: ade_muhdiat

3. Solaris

Trouble Installing a SCSI Adapter

Discussion started by: Plain Person

4. AIX

Spliting PCI-X Dual Channel Ultra320 SCSI Adapter

Discussion started by: kwliew999