Sponsored Content
Full Discussion: cpu replacement. help
Top Forums UNIX for Dummies Questions & Answers cpu replacement. help Post 38773 by davidg on Friday 25th of July 2003 08:40:04 AM
Old 07-25-2003
Hi,

For Sun you have multiple solutions to get the box down.
A normal one is "init 0" This brings your server safely in the "ok"prompt. By turning the power switch off you've done the right thing and start doing maintenance.
Normaly you choose for init 0 as you are able to find your machine back. The light is colored orange instead of green blinking and you know you have hit the right system. However if you make a mistake it's easier to bring the system back online by typing boot.

A faster way is "init 5" This will not only bring the system to the ok prompt, but immediatly after will shut down power of the system. You have to manualy power up the system again now. You probably understand why I would not choose for this option when you work in a large datacenter.

When having troubles in getting the machine down as it's hanging due to problems in the OS, there is only one beautifull command that always gets your server in the ok prompt :

uadmin 0 2 (or 2 0, can't remember, one just gives an error)

This will kick the server to the ok-prompt, it only syncs data and than leaves the OS behind Smilie
Mind that you use this option only in emergencies !!!


Regs David
 

10 More Discussions You Might Find Interesting

1. Solaris

How to down a particular CPU in a server, witch is having 16 CPU's

Hi.., my dout is a solaris server is having 16 cpu's. in tht one cpu running some error process, accupaying more space. I wanna down tht particular CPU only with out interrupting the other 15 CPU's. how can i do this. is there any command for this ?? (5 Replies)
Discussion started by: b.janardhanguru
5 Replies

2. UNIX for Dummies Questions & Answers

how to get persistant cpu utilization values per process per cpu in linux (! top,ps)

hi, i want to know cpu utilizatiion per process per cpu..for single processor also if multicore in linux ..to use these values in shell script to kill processes exceeding cpu utilization.ps (pcpu) command does not give exact values..top does not give persistant values..psstat,vmstat..does njot... (3 Replies)
Discussion started by: pankajd
3 Replies

3. Solaris

Multi CPU Solaris system shows 100% CPU usage.

Hello Friends, On one of my Solaris 10 box, CPU usage shows 100% using "sar", "vmstat". However, it has 4 CPUs and prstat and glance are not showing enough processes to justify high CPU utilization. ========================================================================= $ prstat -a ... (4 Replies)
Discussion started by: mahive
4 Replies

4. Solaris

cpu-shares vs cpu-cap in solaris

Can anyone tell me difference between cpu-shares vs cpu-cap in solaris & how FSS will work with cpu-caps ? (9 Replies)
Discussion started by: fugitive
9 Replies

5. Solaris

CPU and CPU-Utilization

Hi, I am a weblogic Admin I our env there are 5 servers running in one Solaris 10 Sparc machine. But when i tried for process status using <top> command I got the following output load averages: 1.75, 2.18, 2.12; up 134+08:28:49 22:24:21 79 processes: 77 sleeping, 1 running,... (1 Reply)
Discussion started by: Joseph Antoine
1 Replies

6. Solaris

Difference between CPU CHIP and CPU ID

Hi All, What is the difference between CPU CHIP and CUP ID on SUN/ Oracle M5000 servers.. Thanks in advance (3 Replies)
Discussion started by: kumarmani
3 Replies

7. Solaris

SunFire V240 CPU Heat Sink Replacement

I got a replacement Heatsink and Fan unit, but the OEM unit has the SUN Thermal Interface Material (TIM) already on the heatsink matting surface. Because mine is used it does not have the TIM. Also there are 2 different TIM material SUN used based on the Processor (1-1.28GHz uses a glue backed... (1 Reply)
Discussion started by: danneskjold0809
1 Replies

8. UNIX for Dummies Questions & Answers

Is it possible to combine multiple CPU to act as a single CPU on the same server?

We have a single threaded application which is restricted by CPU usage even though there are multiple CPUs on the server, hence leading to significant performance issues. Is it possible to merge / combine multiple CPUs at OS level so it appear as a single CPU for the application? (6 Replies)
Discussion started by: Dissa
6 Replies

9. AIX

Entitled CPU lesser Than Used CPU !!

Hi All, It may be a n00b question, but i really want to know , How Entitled Capacity is less and Used CPU is more when there is no Free CPU is available in the managed system. I have 5LPARs in a MS with Dual VIO. Managed System CPU details Available: 0.20 Assigned to partitions: 15.80... (11 Replies)
Discussion started by: Thala
11 Replies

10. UNIX for Beginners Questions & Answers

Why Entitlement CPU can't be set to same as Virtual CPU?

I read that Entitlement CPU should be set to max 75% compare to Virtual CPU. May I know the reason. I have set the Entitlement CPU = Virtual CPU on AIX . It works fine . Can you help to understand. (1 Reply)
Discussion started by: gabhanes
1 Replies
SULOGIN(8)						Linux System Administrator's Manual						SULOGIN(8)

NAME
sulogin -- Single-user login SYNOPSIS
sulogin [ -e ] [ -p ] [ -t timeout ] [ tty-device ] DESCRIPTION
sulogin can be invoked by init(8) when the system goes into single user mode (this is done through an entry in inittab(5)). Init also tries to execute sulogin when it is passed the -b flag from the bootmonitor (eg, LILO). The user is prompted Give root password for system maintenance (or type Control-D for normal startup): sulogin will connected to the current terminal, or to the optional device that can be specified on the command line (typically /dev/con- sole). If the -p flag was set, the single-user shell will be invoked with a dash as the first character in argv[0]. That will cause most shells to behave as a login shell. The default is not to do this, so that the shell will not read /etc/profile or $HOME/.profile at startup. After the user exits the single-user shell, or presses control-d at the prompt, the system will (continue to) boot to the default runlevel. ENVIRONMENT VARIABLES
sulogin looks for the environment variable SUSHELL or sushell to determine what shell to start. If the environment variable is not set, it will try to execute root's shell from /etc/passwd. If that fails it will fall back to /bin/sh. This is very valuable together with the -b flag to init. To boot the system into single user mode, with the root file system mounted read/write, using a special "failsafe" shell that is statically linked (this example is valid for the LILO bootprompt) boot: linux -b rw sushell=/sbin/sash FALLBACK METHODS
sulogin checks the root password using the standard methods first. If the -e option was specified, sulogin examines the next files to find the root password. If they are damaged, or non-existant, it will use fallback methods that even go so far as to provide you with a shell prompt without asking for the root password if they are irrepairably damaged. /etc/passwd, /etc/shadow (if present) AUTHOR
Miquel van Smoorenburg <miquels@cistron.nl> SEE ALSO
init(8), inittab(5). 11 Sep 2000 SULOGIN(8)
All times are GMT -4. The time now is 06:04 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy