05-20-2003
this was easy when you know how,
The MSL5000 has a NSR which some config needs to be done to, I had to map the robot and drives to the NSR before the Unix box could see em
then in a file called
/kernel/drv/qla2200.conf >>> card dependant had to offer a target address matching up to the st.conf and sd.conf files
then once I had followed the configuration with omniback it was easy
had my 2 dev files in /dev/rmt
9 More Discussions You Might Find Interesting
1. Shell Programming and Scripting
Hi i want the output of the following code as follows:
colname typename NOT NULL default current timestamp
But there seems to be some problem . Kindly correct that
COLNAME="colname"
typename="typename"
DEFAULT="current timestamp"
echo "$COLNAME $TYPENAME NOT NULL... (1 Reply)
Discussion started by: skyineyes
1 Replies
2. Solaris
Hi All,
I recently got a connection to the SAN through a fibre channel on my solaris box:
#luxadm -e port
/devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:devctl CONNECTED
#ls -l /dev/cfg
lrwxrwxrwx 1 root root 48 Feb 23 12:31 c4 -> ../../devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:fc
I then... (2 Replies)
Discussion started by: dede
2 Replies
3. OS X (Apple)
I've got an unusual problem that deals with connecting via SMB under Snow Leopard, to a directory share with over 1,000 users. When I connect to the main directory share, the next level reveals 1,000 users, but I'd like to have the connection identify me as a registered user in AD at the time of... (0 Replies)
Discussion started by: unimachead
0 Replies
4. Shell Programming and Scripting
hi,
I would like to ask or is it possible to dump a hex using dd from starting point to end point just like the "xxd -s 512 -l 512 <bin file>"
I know the redirect hexdump -C but i can't figure it out the combination options of dd.
Hope someone can share their knowledge..
Thanks in... (3 Replies)
Discussion started by: jao_madn
3 Replies
5. Solaris
Hi
Well I would like to know step by step process of adding a mountpoint in HAPLUS resource in SUN cluster as I go the below command to add a mount point but not the step by step process of adding a mount point in existing HA Plus resource.
clrs set -p FileSystemMountPoints+=<new_MP>... (3 Replies)
Discussion started by: amity
3 Replies
6. Shell Programming and Scripting
Hi again,
first thanks for all your suggestions. This forum it is very useful.
I have a question. Is it possible to read from the last line a file was closed. For example, imagine that i've got a file with a LOT of timestamps :
1467387616.868717770
1467387616.874189609... (1 Reply)
Discussion started by: Board27
1 Replies
7. Shell Programming and Scripting
Hi again,
first thanks for all your suggestions. This forum it is very useful.
I have a question. Is it possible to read from the last line a file was closed. For example, imagine that i've got a file with a LOT of timestamps :
1467387616.868717770
1467387616.874189609... (4 Replies)
Discussion started by: Board27
4 Replies
8. IP Networking
Hello,
Please note that we have squid and running properly on ADSL connection. We have upgraded the link to connect through our Fibre switch with a public static IP.
How do we configure squid to connect through this static ip? Note when we connect it directly from fibre switch to our laptop -... (0 Replies)
Discussion started by: isoabv
0 Replies
9. UNIX for Beginners Questions & Answers
How to create a new mount point with 600GB and add 350 GBexisting mount point
Best if there step that i can follow or execute before i mount or add diskspace IN AIX
Thanks (2 Replies)
Discussion started by: Thilagarajan
2 Replies
LEARN ABOUT OPENSOLARIS
dda
dda(7D) Devices dda(7D)
NAME
dda - MMS disk archiving driver
SYNOPSIS
/devices/pseudo/dda@lun:bn
DESCRIPTION
The Media Management System (MMS) is a distributed removable media management system based on the IEEE 1244 Media Management System speci-
fication. MMS provides a uniform and consistent tape interface to client applications.
The dda driver is a pseudo tape drive with filesystem file media. The dda driver is a minimal emulation of the st(7D) tape driver mtio(7I)
interface with BSD no-rewind behavior and is used for MMS disk archiving. The dda driver should be used with a MMS MMP mount command han-
dle. You configure DDA tapes, drives, and libraries for disk archiving using the mmsadm(1M) command. You also use mmsadm(1M) to mount and
unmount dda media.
CONFIGURATION
To set the number of disk archiving tape drives available for MMS disk archiving, edit the /kernel/drv/dda.conf configuration file. The
default number of disk archiving tape drives is 20.
The disk archiving tape drive devlinks are located in the /dev/dda directory.
The DDA maximum block size is 262144 bytes and the minimum is 1 byte.
FILES
/kernel/drv/dda 32-bit kernel module (x86)
/kernel/drv/sparcv9/dda 64-bit kernel module (SPARC)
/kernel/drv/amd64/dda 64-bit kernel module (x86)
/kernel/drv/dda.conf dda configuration file
ATTRIBUTES
See attributes(5) for a description of the following attributes:
+--------------------+---------------------------------------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+--------------------+---------------------------------------------------------+
|Architecture | SPARC, x86 |
+--------------------+---------------------------------------------------------+
|Availability | SUNWmmsr |
+--------------------+---------------------------------------------------------+
|Interface Stability | Uncommitted |
+--------------------+---------------------------------------------------------+
SEE ALSO
mt(1), mmsadm(1M), attributes(5), dmd(7D), st(7D), mtio(7I)
IEEE 1244 Removable Media Standards Specification -- IEEE, 2000
SunOS 5.11 17 Oct 2008 dda(7D)