Hello every one.
I work in a LAN with many application server.
Each one use a different port.
What command permit to obtain the number of these port.
thanks (2 Replies)
If I change my SNMP strings from the default PUBLIC to something else.
Does this take effect right away or do i have to restart snmpd or HUP it or...something...?
this is RHEL 3 AS (1 Reply)
Hi all,
I need to change the source port number of an outgoing TCP packet. First I have to bind the socket to a particular port(suppose 9001) but when I send the TCP packet I want to change the source port number lets say to 9002 still letting the socket to be bound to the same old port (9001).... (0 Replies)
I have a txt file as database. when i run my program what it does is it ask me for 3 name and stored in the file as
name1:name2:name3:1
when u enter 3 name it add those in file as above format and add 1 at the end. I what i want is if i enter same names again it changes that 1 to 2 and so... (3 Replies)
Hi ,
Currently DELL OMSA SNMP sends data through default udp port 161.I want my custom SNMP MIB also to send data in the same udp port 161.Whether its possible.If yes where to configure .I tried starting my custom MIB in udp port 161,but it throws port already in use.Kindly guide. (0 Replies)
Hi ,
Currently DELL OMSA SNMP sends data through default udp port 161.I want my custom SNMP MIB also to send data in the same udp port 161.Whether its possible.If yes where to configure .I tried starting my custom MIB in udp port 161,but it throws port already in use.Kindly guide. (1 Reply)
please find the below o/p for your reference
bash-3.00# fcinfo hba-port
HBA Port WWN: 21000024ff295a34
OS Device Name: /dev/cfg/c2
Manufacturer: QLogic Corp.
Model: 375-3356-02
Firmware Version: 05.03.02
FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;... (3 Replies)
Discussion started by: sb200
3 Replies
LEARN ABOUT OSF1
snmp_traprcv
snmp_traprcv(8) System Manager's Manual snmp_traprcv(8)NAME
snmp_traprcv - A program that listens for SNMP trap messages and prints any it receives
SYNOPSIS
/usr/sbin/snmp_traprcv [-d] [-tcp] [-p port]
OPTIONS
Sends a hexadecimal dump of the received packet to stdout. Specifies that the TCP transport be used instead of the UDP transport. If a
connection cannot be established, the program silently receives the trap on the standard transport address (UDP 162). Specifies the port
number on the local host on which to listen to messages. The default is 162, the well-known SNMP trap port.
DESCRIPTION
The snmp_traprcv program listens on the SNMP Trap port specified in the /etc/services file. If no entry exists in the /etc/services file,
the program listens on port 162. If any SNMP trap messages arrive, snmp_traprcv prints them to stdout. The program runs until terminated
by typing Ctrl/c.
RESTRICTIONS
When using the default or well-known port, you must have root privileges in order to run this program. The program may not be able to bind
to the default or specified port if other software on the system is already bound to that port.
SEE ALSO
Commands: snmpd(8), snmp_request(8), snmp_trapsnd(8)snmp_traprcv(8)