reading from tape error Post: 30895

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

error reading from tape

Hi all, I am attempting to read tar images from a DLT tape, and have recieved an error, which i don't know: tar: blocksize = 8 tar: directory checksum error I have been able to read from other tapes, using the same command (tar -tvf /devicename) but this time i have an...

2. SCO

Tape error.

Hi, I am new to unix. We use Travan tapes to backup. The tape drive on two of our machines was working fine till this morning till we used the cleaning tape. We put the cleaning tape on the first machine, it got struck so we have to pull it out. Since then when we do the tar command we are getting...

3. AIX

reading contents on a 4mm tape

I am experimenting with one of my TSM processes, and I am trying to write something to a 4mm tape. I tried to use the tctl command, but, I was unsuccessful. what AiX command can I run in order to see if my output is on the tape ? Thank You !

4. AIX

Problem reading a 4mm tape drive

I'm attempting to read a tape in a 4mm drive (AIX 4.3) using the following command... tar tvf /dev/rmt0 ...and I keep getting the following error message: tar: 0511-193 An error occurred while reading from the media. There is not enough memory available now. I've googled this error...

5. UNIX for Advanced & Expert Users

Reading from a corrupted tape

I've got a backuptape in cpio format that was accidentally overwritten with a very small batch file. As I assume that the cpio header has been overwritten, I cannot extract files from the backup in the conventional manner: ( cpio -itv </dev/rct0 cpio: this is not a cpio file, bad header) ...

6. UNIX for Dummies Questions & Answers

Reading a tape from a StorEdge Autoloader L8.

Does anyone know how to read an LTO tape from this jukebox?

7. UNIX for Dummies Questions & Answers

Reading label from tape

Hi, I have a HP SURESTORE 40 tape drive. Several archives are stored on it using DUMP. I have several volumes stored on the tape... If I issue restore -rf /dev/st0 will it restore just the arhcive that the tape reader is currently on or will it restore all of them? Thanks,

8. Red Hat

reading an AIX cpio tape on RH8

Thanks for any insights you might have... I have a RH8 system setup with a DAT drive. I have a AIX tape that was made using cpio. Bottom line is I need to read the AIX tape into the RH box. I was able to do cpio -itv --no-absolute-filenames < /dev/st0 and read the table of contents. ...

9. UNIX for Advanced & Expert Users

ssh error: Error reading response length from authentication socket

Hi - I am getting the error `Error reading response length from authentication socket' when I ssh from my cluster to another cluster, and then back to my cluster. It doesn't seem to affect anything, but it's just annoying that it always pops up and tends to confuse new users of the cluster. I...

10. SCO

Error: msgcnt 1 vxfs: mesg 016: vx_ilisterr - / file system error reading

Hello... i got an error in my SCO OpenServer 6. the error is: msgcnt 1 vxfs: mesg 016: vx_ilisterr - / file system error reading inode 373 Can anyone help me?

LEARN ABOUT FREEBSD

rpm2cpio

rpm2cpio(1)							   User Commands						       rpm2cpio(1)

NAME

       rpm2cpio - convert Red Hat Package (RPM) to cpio archive

SYNOPSIS

       rpm2cpio [file.rpm]

DESCRIPTION

       The  rpm2cpio  utility converts the .rpm file specified as its sole argument to a cpio archive on standard output. (See NOTES.) If no argu-
       ment is given, an rpm stream is read from standard input. In both cases, rpm2cpio will fail and print a usage message if the standard  out-
       put is a terminal. Therefore, the output is usually redirected to a file or piped through the cpio(1) utility.

EXAMPLES

       Example 1: Converting an rpm file

       example% rpm2cpio Device3Dfx-1.1-2.src.rpm | cpio -itv
       CPIO archive found!
       -rw-r--r--   1 root  root    2635 Sep 13 16:39 1998, 3dfx.gif
       -rw-r--r--   1 root  root   11339 Sep 27 16:03 1998, Dev3Dfx.tar.gz
       -rw-r--r--   1 root  root    1387 Sep 27 16:04 1998, Device3Dfx-1.1-2.spec
       31 blocks

       Example 2: Converting from standard input

       example% rpm2cpio < Device3Dfx-1.1-2.src.rpm | cpio -itv
       CPIO archive found!
       -rw-r--r--   1 root  root    2635 Sep 13 16:39 1998, 3dfx.gif
       -rw-r--r--   1 root  root   11339 Sep 27 16:03 1998, Dev3Dfx.tar.gz
       -rw-r--r--   1 root  root    1387 Sep 27 16:04 1998, Device3Dfx-1.1-2.spec
       31 blocks

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWrpm			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       cpio(1), attributes(5)

NOTES

       rpm2cpio handles versions 3 and 4 RPMs.

SunOS 5.10							    20 Aug 2001 						       rpm2cpio(1)

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

error reading from tape

Discussion started by: colesy

2. SCO

Tape error.

Discussion started by: krk123

3. AIX

reading contents on a 4mm tape

Discussion started by: DATDANGGADUDE

4. AIX

Problem reading a 4mm tape drive

Discussion started by: tdpearson