10gbe ixgbe slow at 420mbyte/s max, p2p lan cat8 1m, tried ethtool and ifconfig options to no avail Post: 303045725

9 More Discussions You Might Find Interesting

1. Solaris

How to configure private LAN and coporate LAN on the same machine-Solaris10

Hi , I am trying to configure a private LAN and corporate LAN on the same machien on Solaris 10. How can I achieve this? Thanks

2. Shell Programming and Scripting

ethtool : command not found

Hi, I am uising Suse linux on my system and i tried : man ethtool and i got the manual for ethtool but when i tried to use the command as: ethtool -a eth0 it says Command not found. also, i tried rpm -qa|grep ethtool i got: ethtool-3-15.2 so,it means my system has ethtool server or...

3. Programming

ethtool problem

Hi, I'm using ethtool to change network settings: Just for the experiment, i want to change speed to 10, instead of 100, I type: ethtool -s eth0 speed 10 duplex full autoneg off and to view settings i type: ethtool eth0, and get this: Settings for eth0: Supported ports: ...

4. IP Networking

Slow LAN FTP Transfers with FreeBSD...

Hello, I've got a FreeBSD 6 server running on my network that I used as a file server for my main computer. However I've really become frustrated with the slow up/down speeds I'm getting, about 100KB/s, which is about as bad as if I was using a "real" server. My setup is as follows: ISP |...

5. IP Networking

Local Lan, no-ip directed DNS forward, surf within lan

Hi, We have a website running on a local centos 5.4 surfer, static IP. The domain.com uses no-ip.com to take care of the DNS, it forwards all to my server. My router receives the port 80 call, routes it to my server and the world can see domain.com perfectly fine. However, we cannot see...

6. Shell Programming and Scripting

cut, sed, awk too slow to retrieve line - other options?

Hi, I have a script that, basically, has two input files of this type: file1 key1=value1_1_1 key2=value1_2_1 key4=value1_4_1 ... file2 key2=value2_2_1 key2=value2_2_2 key3=value2_3_1 key4=value2_4_1 ... My files are 10k lines big each (approx). The keys are strings that don't...

7. Red Hat

Ethtool script not running on boot.

Hi, there is an incompatibility between my NIC and my Western Digital Powerline adapters which appears to cause autonegotiation to fail intermittently, most often following a reboot. Running the following Ethtool script will establish a connection immediately: #!/bin/sh # chkconfig: 345 85...

8. UNIX and Linux Applications

VSFTPD slow download outside of LAN

Hello all. I have VSFTP up and ruining on ubuntu 10.04. It works great inside LAN, however when it comes to using it outside i have some problems. If i try to connect from filezila i get the listing and if i try to download it shows it will take forever to receive a file which is larger then 1mb,...

9. UNIX for Beginners Questions & Answers

Ethtool command not working

Hi All, I am trying to find my NIC card speed in centos 5. But i am unable to get the info using ethtool command. # ethtool eth0 Settings for eth0: Link detected: yes and even tried to look for the file # cd /sys/class/net/eth0/speed files which is also not available....

LEARN ABOUT LINUX

initctl2dot

initctl2dot(8)						      System Manager's Manual						    initctl2dot(8)

NAME

       initctl2dot - manual page for initctl2dot

SYNOPSIS

       initctl2dot [OPTIONS]

DESCRIPTION

       Convert initctl(8) output to GraphViz dot(1) format.

       With no options, initctl(8) will be invoked automatically and the output written to file upstart.dot.

OPTIONS

       -h     Display usage statement.

       -f INFILE , --infile=INFILE
	      File to read initctl(8) output from ("initctl show-config -e"). If not specified, initctl(8) will be run automatically.

       -w OUTFILE , --outfile=OUTFILE
	      File to write output to.

       -r RESTRICTIONS , --restrict-to-jobs=RESTRICTIONS
	      Limit display of start on and stop on conditions to comma-separated list of jobs.

       --color-emits=COLOR_EMITS
	      Specify color for 'emits' lines.

       --color-start-on=COLOR_START_ON
	      Specify color for 'start on' lines.

       --color-stop-on=COLOR_STOP_ON
	      Specify color for 'stop on' lines.

       --color-event=COLOR_EVENT
	      Specify color for event boxes.

       --color-text=COLOR_TEXT
	      Specify color for summary text.

       --color-bg=COLOR_BG
	      Specify background color for diagram.

       --color-event-text=COLOR_EVENT_TEXT
	      Specify color for text in event boxes.

       --color-job-text=COLOR_JOB_TEXT
	      Specify color for text in job boxes.

       --color-job=COLOR_JOB
	      Specify color for job boxes.

AUTHOR

       Written by James Hunt <james.hunt@ubuntu.com>

REPORTING BUGS

       Report bugs at <https://launchpad.net/upstart/+bugs>

COPYRIGHT

       Copyright (C) 2011 Canonical Ltd.
       This is free software; see the source for copying conditions.  There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICU-
       LAR PURPOSE.

SEE ALSO

       init(8) initctl(8)

Upstart 							    2011-03-07							    initctl2dot(8)