ARFF(8) 						      System Manager's Manual							   ARFF(8)

NAME

       arff, flcopy - archiver and copier for floppy

SYNOPSIS

       /usr/sbin/arff [ key ] [ name ... ]
       /usr/sbin/flcopy [ -h ] [ -tn ]

DESCRIPTION

       Arff  saves and restores files on VAX console media (the console floppy on the VAX 11/780 and 785, the cassette on the 11/730, and the con-
       sole RL02 on the 8600/8650).  Its actions are controlled by the key argument.  The key is a string of characters  containing  at  most  one
       function  letter  and possibly one or more function modifiers.  Other arguments to the command are file names specifying which files are to
       be dumped or restored.  The default options are correct for the RX01 floppy on the 780; for other console media, the  f	and  m	flags  are
       required.

       Files  names  have restrictions, because of radix50 considerations.  They must be in the form 1-6 alphanumerics followed by "." followed by
       0-3 alphanumerics.  Case distinctions are lost.	Only the trailing component of a pathname is used.

       The function portion of the key is specified by one of the following letters:

       r       The named files are replaced where found on the floppy, or added taking up the minimal possible portion of the first empty spot	on
	       the floppy.

       x       The named files are extracted from the floppy.

       d       The  named  files are deleted from the floppy.  Arff will combine contiguous deleted files into one empty entry in the rt-11 direc-
	       tory.

       t       The names of the specified files are listed each time they occur on the floppy.	If no file argument is given, all of the names	on
	       the floppy are listed.

       The following characters may be used in addition to the letter which selects the function desired.

       v	 The v (verbose) option, when used with the t function gives more information about the floppy entries than just the name.

       f	 causes arff to use the next argument as the name of the archive instead of /dev/floppy.

       m	 causes  arff  not  to use the mapping algorithm employed in interleaving sectors around a floppy disk.  In conjunction with the f
		 option it may be used for extracting files from rt11 formatted cartridge disks, for example.  It may also be  used  to  speed	up
		 reading  from	and writing to rx02 floppy disks, by using the `c' device instead of the `b' device.  It must be used with TU58 or
		 RL02 media.

       c	 causes arff to create a new directory on the floppy, effectively deleting all previously existing files.

       Flcopy copies the console floppy disk (opened as `/dev/floppy') to a file created in the current directory, named "floppy", then prints the
       message "Change Floppy, hit return when done".  Then flcopy copies the local file back out to the floppy disk.

       The  -h	option to flcopy causes it to open a file named "floppy" in the current directory and copy it to /dev/floppy; the -t option causes
       only the first n tracks to participate in a copy.

FILES

       /dev/floppy or /dev/rrx??
       floppy (in current directory)

SEE ALSO

       crl(4), fl(4), rx(4), tu(4), rxformat(8)

AUTHORS

       Keith Sklower, Richard Tuck

BUGS

       Device errors are handled ungracefully.

4th Berkeley Distribution					 November 16, 1996							   ARFF(8)