AIX Server on the local LAN -> Ip address : 172.16.80.80
My workstation on the local LAN -> Ip address : 172.16.80.85
FTP server which is hosted on cloud> Ip address : 164.52.194.12
Connection from my workstation to the FTP server
Code:
Windows PowerShell
Copyright (C) 2015 Microsoft Corporation. All rights reserved.
PS C:\Users\LINC> ftp
ftp> open 164.52.194.12
Connected to 164.52.194.12.
220 Microsoft FTP Service
200 OPTS UTF8 command successful - UTF8 encoding now ON.
User (164.52.194.12:(none)): saplincpen
331 Password required
Password:
Status : Successful
Connection from AIX server to FTP server
Code:
# ping 164.52.194.12
PING 164.52.194.12: (164.52.194.12): 56 data bytes
203 packets transmitted, 0 packets received, 100% packet loss
Code:
# traceroute 164.52.194.12
trying to get source for 164.52.194.12
source should be 172.16.80.80
traceroute to 164.52.194.12 (164.52.194.12) from 172.16.80.80 (172.16.80.80), 30 hops max
outgoing MTU = 1500
1 * * *
2 * * *
3 * * *
4 * * *
5 * * *
6 * * *
7 * * *
8 * * *
9 * * *
I have the following ftp script to get files from a remote location.
However, on running the script I find that I am not even able to connect to ftp server.
I am able to connect to ftp server using other GUI ftp tools like WS_FTP using the same IP.
IP used here is a dummy IP.
What can go... (3 Replies)
Hi,
I have xmanager installed on my windows PC. But I am not able to connect to AIX server.
It's giving the error as follows:
The X11 forwarding request was rejected. Graphics mode is not coming up in AIX server.
Please help as I have to install oracle patchset urgently. (1 Reply)
Hello All,
I am trying to connect to ftp server and get the files. Also i need to rename the file in other ftp dir.
rename method is not allowing me to rename the file in other dir. When i tried copy command by using net::FTP:FILE then perl says it is not installed.
Can some body help me to... (2 Replies)
Hi,
I have two unix servers A and B. from A i am trying to use the ftp command to connect to B but I am getting the "ftp: connect: A remote host refused an attempted connect operation."
I checked the following things :
1.) Unix Server details for A and B after running the command uname -a... (3 Replies)
Hi,
Could you please help me with the below issue..
I'm running RHEL6 OS on both server (192.168.0.10) and client machines (192.168.0.1).
I'm trying to connect to server from the client machine using ftp service.
I have installed vsftpd daemon on both the machines.
I'm getting... (4 Replies)
Hi,
I am unable to connect sun server, server model is sun fire v440
on server 2 ports are there.
serial management, and network management.
I would like to know how to connect serial port if I dont have com port on my system? and on Network Management no ip address is configured.
... (2 Replies)
Hi All,
We have done new FTB setup.
I am not able to to connect to this new target server.
Here is the new setup to send files to the FTB :
- Login : FTB-TAN-DEV-SAP
- Protocol : SFTP
- Port : 54322
- Hostname : ftb-dev.apj.hp
- Env : DEV
- Target ID : 3225
I tried connecting to the... (5 Replies)
Discussion started by: ROCK_PLSQL
5 Replies
LEARN ABOUT DEBIAN
irsend
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)
02-20-2020
