Sponsored Content
Top Forums Programming Arduino Project: iPhone to HM-10 BLE to NB-IoT Shield to NB-IoT Network to Internet to Linux Server Post 303043467 by Neo on Wednesday 29th of January 2020 08:15:44 AM
Old 01-29-2020
Update:

I've posted the high level overview, the schematic, links, a lot of pictures, screenshots, discussion, and all my testing /working code (for testing purposes only).

So, for now I'm going to call this Arduino UNO project / proof-of-concept "good enough" and move on to testing a different Ardunio module or shield.

If you like this demo or find anything useful, I'm happy to hear about it. Please consider this demo "like an online notebook" of my testing and my results. Raw, unpolished, the "real deal", and no artificial sweeteners added Smilie I tend to have a low attention span, so when I get a proof-of-concept like this up and running (and prove it works), even if the final results are not "polished", I then want to "call it good enough" and quickly move on to the next project.

If you want to improve the code and post your code back here, or elsewhere, that is even better. Share and share alike.

Either way, you are free to share and use any or all the the content in this test / demo (not designed nor created for production code); and so for now, this concludes:

Arduino Project: iPhone to HM-10 BLE to NB-IoT Shield to NB-IoT Network to Internet to Linux Server

Thanks!
These 2 Users Gave Thanks to Neo For This Post:
 

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Linux for an internet server to an ISP

I just moved away from a T3 line back to a dial up I just wanted to know would a P200 with 64meg and a 4 gig hard drive be ok for a linux server for an additional 3 pcs all running win98. I will be dialing into an isp using a 56k v90 modem. Any support or help will be great. (3 Replies)
Discussion started by: izrailov
3 Replies

2. IP Networking

can i force connecting to local web server via internet network ?

Hello all this is general question , if i have web server installed in my local pc and i have client that connecting to that web server can i force it always to go via the internet network ? the reason im asking is .. that im noticed when i close my internet connection i still can connect to my... (2 Replies)
Discussion started by: umen
2 Replies

3. IP Networking

Can not access Linux server over the Internet

hi i have linux server connected to internet through a switch/router. i have opened a port on the router and i am able to connect to the server if iptables is off. but when it is on i cant. i want to create a rule in iptables so that it accepts packets coming from a particular datacard. it... (7 Replies)
Discussion started by: u.n.i.x
7 Replies

4. Programming

Arduino-cli - Uploading to Unknown Chinese Arduino Boards using the Arduino Command Line Interface

In my further exploration of Arduino, today I decided to install the arduino-cli on my mac today. https://github.com/arduino/arduino-cli I followed the instructions for macOS but when I got to this part: arduino-cli board list I got the dreaded "Unknown" Fully Qualified Board Name... (1 Reply)
Discussion started by: Neo
1 Replies

5. Programming

Arduino Project with NB-IoT (3GPP) and LoRa / LoRaWAN

My favorite projects are always related to the "latest" tech in command and control, networking and network communications. This Elecrow GSM/GPRS/EDGE SIM5360E 3G Shield seems to be the "latest and the greatest" as far as 3G and GPS, as far as I can see so far, but I has it drawbacks for sure.... (6 Replies)
Discussion started by: Neo
6 Replies

6. Programming

NB-IoT Arduino Shield from AIS (Thailand) First Impressions

Today I received my NB-IoT Arduino Shield for AIS (Thailand). Here is a "pinout" photo of the shield. My shield looks just like the one above, for the most part. I'll post another photo of the actual device later. When I received the shield in the mail, I went immediately to a local... (8 Replies)
Discussion started by: Neo
8 Replies

7. Programming

Elecrow GSM/GPRS/EDGE SIM5360E 3G Shield for Arduino

Normally I have very good experiences buying from AliExpress, but in this case with Elecrow, I'm disappointed. After confirming with Elecrow on AliExpress that their Elecrow GSM/GPRS/EDGE SIM5360E 3G Shield for Arduino would work with 3G SIM cards in Thailand, I purchased one. My plan was to... (1 Reply)
Discussion started by: Neo
1 Replies

8. Programming

Basic Arduino UNO Bluetooth Testing with the BLE 4.0 (CC2541, MLT-BT04 IC)

Here is a sketch to do basic testing for the Arduino UNO and the MLT-BT04. This BLE module works with IOS (iPhone) and I'll add some details on my IOS testing with an iPhone in a follow-up post. For now, here is the basic BLE (HM-10) sketch for the Arduino UNO: /* Arduino test-code... (7 Replies)
Discussion started by: Neo
7 Replies

9. Programming

Wuhan Coronavirus Status App for China - Rapid Prototype using MQTT and the IoT OnOff IOS App

With a little bit of work, was able to build a nice "Wuhan Coronavirus Status" app using MQTT and the IoT-OnOff app. More on this technique here: ESP32 (ESP-WROOM-32) as an MQTT Client Subscribed to Linux Server Load Average Messages The result turned out nice, I think. I like the look and... (10 Replies)
Discussion started by: Neo
10 Replies

10. Hardware

Arduino Robot Tank Project

Normally I'm not into kits, but I thought my wife would enjoy this one since she is a big fan of robots and droids on StarWars! We are done with the basic mechanical assembly and starting on the electronics assembly today. The robot's "brain" consists of three levels. The Arduino board, on... (5 Replies)
Discussion started by: Neo
5 Replies
network-test(1) 						  ifupdown-extra						   network-test(1)

NAME
network-test - check the network and test if everything is fine SYNOPSIS
network-test DESCRIPTION
The network-test program will test your system's network configuration using basic tests and providing both information (INFO), warnings (WARN) and possible errors (ERR) based on the results of these tests. It will check and report on: * Status of the network interfaces of the system including: link status, IP addressing and number of transmitted packets and error rates. * Accessibility to configured routes to external networks, including the default network route, checking the routers configured to give access to the network * Proper host resolution, testing DNS resolution against a known host. * Proper network connectivity, testing reachability of remote hosts using ICMP and simulating a web connections to a remote web server (the web server used for the tests can be configured through the environment, see below) The program does not need special privileges to run as it does not do any system change. However, the behaviour of the program when running as an unprivileged user is not the same as running as system administrator (i.e. root). If the program is run as system administrator it will try to run some tools that are only available to it to speed up some of the tests. The program relies on the use of ip, netstat, ifconfig, arp and (when running as root) ethtool or mii-tool, to obtain information about the system's networking configuration (status of available interfaces and configured network routes). It also uses ping, host and nc (netcat) to do tests of the network connectivity and ensure that the host can connect to the Internet. ENVIRONMENT
The program will, by default, check www.debian.org and its associated web server. If you want to use a different check host you can setup the environment as follows: CHECK_HOST The name of a host to use when testing DNS resolution. CHECK_IP_ADRESS The IP address of the host defined in CHECK_HOST CHECK_WEB_HOST The web server to use for testing purposes when testing network connectivity. CHECK_WEB_PORT The web server port of server CHECK_WEB_HOST that will be used for testing. EXIT STATUS
The program will exit with error (1) if any of the network checks fail. BUGS
This program does not have super cow powers so it is unable to fix the errors by itself. It is also unable to detect if the network is failing due to a local firewall policy been in place so make sure you check your system logs with dmesg (1) to detect if some of the active tests are being dropped due to your local firewall. Other known issues that might make the program not work reliable are: * IPv6: The program does not yet explicitly handle IPv6 only hosts, some of the tests might be biased towards IPv4 and might fail in IPv6 environments. * Proxies: The program does not check network connectivity for hosts that connect through the Internet using a proxy gateway for services. The program might report issues in hosts using proxies even when these might connect to the Internet properly through proxied services. * Firewall environments: some of the tests rely on direct connectivity to external hosts, which are tested using ICMP queries (through the use of ping. These tests might fail in hosts installed in networking environments with firewalls that block outbound ICMP communication. SEE ALSO
ip (8), netstat (8), ifconfig (8), ethtool (8), mii-tool (8), ping (8), nc (1) and host (1). AUTHOR
network-test was written by Javier Fernandez-Sanguino for the Debian GNU/Linux distribution. COPYRIGHT AND LICENCE
Copyright (C) 2005-2011 Javier Fernandez-Sanguino <jfs@debian.org>. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. On Debian systems, a copy of the GNU General Public License may be found in /usr/share/common-licenses/GPL. ifupdown-extra August 23 2011 network-test(1)
All times are GMT -4. The time now is 05:31 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy