My Fc cards on T4-2 servrs are
now bencmarking is already done by another team and its ok as the same is working in other data cntre very well
--- Post updated at 01:39 PM ---
i have changed the cables connecting machines to storage controller and then change the SFPS in FC cards even the issue persist. then i also change the ports at
Fiber switch but issue remains the same . now from the same switch and on the same WWN on storgae controller we have another database running + other chaisis but no issue there so i guess it will be the FC cards which is messing so that why i asked for any commnds to check the constant connectivity of this FC cards or any thing else for the same purpose
Hi all,
I have a compatibly issues with a new hardware
My config is the following one :
Solaris 10
V490 Hardware
2 X HBA Qlogic 2310f cards
An HP EVA 5000 for storage ...
Veritas VxVM 4.1 MP1
When I reboot my server, VxVM is trying to mount/use the volume before it's... (0 Replies)
I need information what maximum error level on FC card need clasification of critical level (SAN mass storidge)
Please write screenshot from utility fcutil whith test option.
Pawel (0 Replies)
Hi,
I'm trying to determine which HBA cards are installed on my Solaris 10 (Sun-Fire-V240) machine.
The relevant data I have is below, but from it I cannot ascertain for sure if I have Emulex 10000 or 11000 HBA cards.
Can anyone suggest how to determine my HBA hardware ?
Thanks,
Ron.
... (3 Replies)
Hi,
I'm trying to determine which HBA cards are installed on my Solaris 10 (Sun-Fire-V240) machine.
The relevant data I have is below, but from it I cannot ascertain for sure if I have Emulex 10000 or 11000 HBA cards.
Can anyone suggest how to determine my HBA hardware ?
Thanks,
Ron.
... (4 Replies)
I installed a FC array for the first time and everything looks OK
in mpathadm, cfgadm, but I don't know what to do next.
# stmsboot -L
non-STMS device name STMS device name
------------------------------------------------------------------
/dev/rdsk/c2t1d0 ... (3 Replies)
Hi ,
I have wrtitten a C program that issues USCSICMD ioctl call to the tape devices attached on solaris sparc 10. I was able to get the required information from all SCSI tape devices attached using the utility. But, whenever it is run on FC attached tape drives , the program returns an error... (0 Replies)
Hello,
I am trying to set up Channel Bonding on a RHEL6 Virtual Box VM. I have 2 ethernet cards on the machine which are set up in Internal Network mode. I followed all the steps exactly as mentioned in the RHEL6 deployment Guide, but for some reason i think results are not correct. Here are my... (13 Replies)
Hi
I had power issue that affected a server, in which I had power ON the server SPARC T1-B3 running solaris 10.
After power on the system stops at ok prompt, them I issued the following commands:
{0} ok setenv auto-boot? false
auto-boot? = false
{0} ok reset-all
SPARC T3-1B,... (10 Replies)
Discussion started by: fretagi
10 Replies
LEARN ABOUT OPENSOLARIS
hba_openadapter
HBA_OpenAdapter(3HBAAPI) Common Fibre Channel HBA Information Library Functions HBA_OpenAdapter(3HBAAPI)NAME
HBA_OpenAdapter, HBA_OpenAdapterByWWN, HBA_CloseAdapter - open and close a specific adapter
SYNOPSIS
cc [ flag... ] file... -lHBAAPI [ library... ]
#include <hbaapi.h>
HBA_HANDLE HBA_OpenAdapter(char *adaptername);
HBA_STATUS HBA_OpenAdapterByWWN(HBA_HANDLE *handle, HBA_WWN wwn);
void HBA_CloseAdapter(HBA_HANDLE handle);
PARAMETERS
adaptername the name of the adapter to open, as returned by HBA_GetAdapterName(3HBAAPI)
handle
HBA_OpenAdapterByWWN() a pointer to an HBA_HANDLE
HBA_CloseAdapter() the open handle of the adapter to close, as returned by HBA_OpenAdapter(3HBAAPI)
wwn the WWN to match the Node WWN or Port WWN of the HBA to open
DESCRIPTION
The HBA_OpenAdapter() function opens the adapter specified by adaptername and returns a handle used for subsequent operations on the HBA.
The HBA_OpenAdapterByWWN() function opens a handle to the HBA whose Node or Port WWN matches the wwn argument.
The HBA_CloseAdapter() function closes the open handle.
RETURN VALUES
Upon successful completion, HBA_OpenAdapter() returns a valid HBA_HANDLE with a numeric value greater than 0. Otherwise, 0 is returned.
The HBA_OpenAdapterByWWN() function returns the following values:
HBA_STATUS_OK
The handle argument contains a valid HBA handle.
HBA_STATUS_ERROR_ILLEGAL_WWN
The wwn argument is not a valid port WWN on the specified HBA.
HBA_STATUS_ERROR_AMBIGUOUS_WWN
The WWN is matched to multiple adapters.
HBA_STATUS_ERROR
An error occurred while opening the adapter.
EXAMPLES
Example 1 Open an adapter.
The following example opens the specified adapter.
handle = HBA_OpenAdapter(adaptername);
if (handle == 0) {
fprintf(stderr, "Unable to open HBA %d with name "
""%s".
", hbaCount, adaptername);
continue;
}
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-------------------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-------------------------------------+
|Interface Stability |Standard: FC-MI 1.92 (API version 1) |
+-----------------------------+-------------------------------------+
| |Standard: FC-HBA Version 4 (API ver- |
| |sion 2) |
+-----------------------------+-------------------------------------+
|MT-Level |Safe |
+-----------------------------+-------------------------------------+
SEE ALSO HBA_GetAdapterName(3HBAAPI), HBA_OpenAdapter(3HBAAPI), libhbaapi(3LIB), attributes(5)
T11 FC-MI Specification
SunOS 5.11 1 Sep 2003 HBA_OpenAdapter(3HBAAPI)