I have checked the state of rmc on the HMC as below:
But I check on my AIX lpar, the rmc is still active
I am still finding the way to check on VIOS rmc state.
so, why the HMC cannot detect the rmc state.
What I can do to get HMC see the state of lpar rmc state. Please advise.
Hi,
Anybody had a problem trying to rmdev a scsi device and get the following error :
root@:/> rmdev -dlscsi3 -R
Method error (/usr/lib/methods/ucfgncr_scsi):
0514-062 Cannot perform the requested function
because the specified device is busy.
I can't... (1 Reply)
Hello,
This is the foll error wen i try doin DLPAR from my VIO after adding the virtual adpaters on my clients:
HSCL294C DLPAR ADD Virtual I/O resources failed:
com.ibm.hsc.common.exceptions.PIHscClientException: HSCL294C DLPAR ADD Virtual I/O... (0 Replies)
Hi all,
I have the following configuration
2 ds3524 storage disk systems located over 2 locations
2 P720 server located over 2 locations
DS3524 are connected to san switch.
Each vio server has 1 fc adapter attached to a san switch.
per p720 server 2 virtual io servers. Vio 1 has 1 lun... (2 Replies)
I am trying to generate a report to track dlpar operation performed on a MS and was wondering if anyone has done this before.
I can get history from HMC using lssvcevents , but this does not give me details as to what quantity was added or removed .
Any thoughts ?
Thanks (3 Replies)
I cannot find the post with the comment that DLPAR capability was not working with IVM.
The two commands that need to be run are (as root, padmin does not know this command):
VIOS: lsrsrc IBM.MngNode
CLIENTS: lsrsrc IBM.MCP
Examples:
# lsrsrc IBM.MngNode
Resource Persistent Attributes for... (2 Replies)
Hi all,
is any of you using RMC for monitoring your LPARs? Is it viable?
I know the IBM Magazine article and the Redbooks about it but I would like to hear from first hand.
Thanks in advance for sharing your experience! (7 Replies)
There can be configurations in IBM Server wherein a
standalone partition is created on some supported IBM Server
Or
A VIOS - VIOC LPARs created.
Now in both cases they are lpars. But if I want to differentiate b/w a standalone LPAR vs an VIOC LPAR how can I do..?
On a... (2 Replies)
Hey All,
I have running dual VIOS on a P9 systems, and just created a new LPAR profile. My objective is to create LPAR Client VFC adapters, and then DLPAR VFC Server adapters on the VIOS.
In the HMC v9 Enhanced GUI, I have DLPAR a VFC adapter to both VIOS, however, you can't specify the... (1 Reply)
Discussion started by: aixkidbee
1 Replies
LEARN ABOUT CENTOS
tpm_setactive
tpm_setactive(8) System Manager's Manual tpm_setactive(8)
TPM Management - tpm_setactive
NAME
tpm_setactive - change TPM active states
SYNOPSIS
tpm_setactive [OPTION]
DESCRIPTION
tpm_setactive reports the status of the TPM's flags regarding the active state of the TPM. This is the default behavior and also
accessible via the --status option. Requesting a report of this status prompts for the owner password. The --active option changes the TPM
to the active state (via the TPM_PhysicalSetDeactivated API). This operation requires evidence of physical presence, is persistent and
requires a reboot to take effect. The --inactive option (via the TPM_PhysicalSetDeactivated API) changes the TPM to the inactive state.
This operation requires evidence of physical presence, is persistent and requires a reboot to take effect. An inactive TPM is essentially
off but still allows for a tpm_takeownership to occur. The --temp option causes deactivation (via the TPM_SetTempDeactivated API) to
happen immediately but only endure for the current boot cycle. The --status, --active, --inactive, and --temp options are mutually
exclusive and the last one on the command line will be carried out.
-h, --help
Display command usage info.
-v, --version
Display command version info.
-l, --log [none|error|info|debug]
Set logging level.
-u, --unicode
Use TSS UNICODE encoding for passwords to comply with applications using TSS popup boxes
-s, --status
Report the status of flags regarding the TPM active states.
-a, --active
Make the TPM active. Operation is persistent, requires phyiscal presence to authorize, and a reboot to take effect.
-i, --inactive
Make the TPM inactive. Operation is persistent, requires phyiscal presence to authorize, and a reboot to take effect.
-t, --temp
Makes the TPM inactive for the current boot cycle only.
-z, --well-known
Authenticate using 20 bytes of zeros as owner password (the default TSS Well Known Secret), instead of prompting for an owner
password.
SEE ALSO tpm_version(1), tpm_setpresence(8), tpm_takeownership(8), tpm_setenable(8), tcsd(8)REPORTING BUGS
Report bugs to <trousers-users@lists.sourceforge.net>
TPM Management 2005-05-06 tpm_setactive(8)