I have checked the state of rmc on the HMC as below:
But I check on my AIX lpar, the rmc is still active
I am still finding the way to check on VIOS rmc state.
so, why the HMC cannot detect the rmc state.
What I can do to get HMC see the state of lpar rmc state. Please advise.
Hi,
Anybody had a problem trying to rmdev a scsi device and get the following error :
root@:/> rmdev -dlscsi3 -R
Method error (/usr/lib/methods/ucfgncr_scsi):
0514-062 Cannot perform the requested function
because the specified device is busy.
I can't... (1 Reply)
Hello,
This is the foll error wen i try doin DLPAR from my VIO after adding the virtual adpaters on my clients:
HSCL294C DLPAR ADD Virtual I/O resources failed:
com.ibm.hsc.common.exceptions.PIHscClientException: HSCL294C DLPAR ADD Virtual I/O... (0 Replies)
Hi all,
I have the following configuration
2 ds3524 storage disk systems located over 2 locations
2 P720 server located over 2 locations
DS3524 are connected to san switch.
Each vio server has 1 fc adapter attached to a san switch.
per p720 server 2 virtual io servers. Vio 1 has 1 lun... (2 Replies)
I am trying to generate a report to track dlpar operation performed on a MS and was wondering if anyone has done this before.
I can get history from HMC using lssvcevents , but this does not give me details as to what quantity was added or removed .
Any thoughts ?
Thanks (3 Replies)
I cannot find the post with the comment that DLPAR capability was not working with IVM.
The two commands that need to be run are (as root, padmin does not know this command):
VIOS: lsrsrc IBM.MngNode
CLIENTS: lsrsrc IBM.MCP
Examples:
# lsrsrc IBM.MngNode
Resource Persistent Attributes for... (2 Replies)
Hi all,
is any of you using RMC for monitoring your LPARs? Is it viable?
I know the IBM Magazine article and the Redbooks about it but I would like to hear from first hand.
Thanks in advance for sharing your experience! (7 Replies)
There can be configurations in IBM Server wherein a
standalone partition is created on some supported IBM Server
Or
A VIOS - VIOC LPARs created.
Now in both cases they are lpars. But if I want to differentiate b/w a standalone LPAR vs an VIOC LPAR how can I do..?
On a... (2 Replies)
Hey All,
I have running dual VIOS on a P9 systems, and just created a new LPAR profile. My objective is to create LPAR Client VFC adapters, and then DLPAR VFC Server adapters on the VIOS.
In the HMC v9 Enhanced GUI, I have DLPAR a VFC adapter to both VIOS, however, you can't specify the... (1 Reply)
Discussion started by: aixkidbee
1 Replies
LEARN ABOUT DEBIAN
prima::timer
pod::Prima::Timer(3) User Contributed Perl Documentation pod::Prima::Timer(3)NAME
Prima::Timer - programmable periodical events
SYNOPSIS
my $timer = Prima::Timer-> create(
timeout => 1000, # milliseconds
onTick => sub {
print "tick!
";
},
);
$timer-> start;
DESCRIPTION
Prima::Timer arranges periodical notifications to be delivered in certain time intervals. The notifications are triggered by the system,
and are seen as "Tick" events. There can be many active Timer objects at one time, spawning events simultaneously.
USAGE
Prima::Timer is a descendant of Prima::Component. Objects of Prima::Timer class are created in standard fashion:
my $t = Prima::Timer-> create(
timeout => 1000,
onTick => sub { print "tick
"; },
);
$t-> start;
If no `owner` is given, $::application is assumed.
Timer objects are created in inactive state; no events are spawned. To start spawning events, <start()> method must be explicitly called.
Time interval value is assigned using the <::timeout> property in milliseconds.
When the system generates timer event, no callback is called immediately, - an event is pushed into stack instead, to be delivered during
next event loop. Therefore, timeout value is not held accurately, and events may take longer time to pass. More accurate timing scheme, as
well as timing with precision less than a millisecond, is not supported by the toolkit.
API
Properties
timeout MILLISECONDS
Manages time interval between "Tick" events. In set-mode call, if the timer is in active state ( see "get_active()", the new timeout
value is applied immediately.
Methods
get_active
Returns a boolean flag, whether object is in active state or not. In the active state "Tick" events are spawned after "::timeout" time
intervals.
get_handle
Returns a system-dependent handle of object
start
Sets object in active state. If succeed, or if the object is already in active state, returns 1. If the system was unable to create a
system timer instance, 0 is returned.
stop
Sets object in inactive state.
Events
Tick
A system generated event, spawned every "::timeout" milliseconds if object is in active state.
AUTHOR
Dmitry Karasik, <dmitry@karasik.eu.org>.
SEE ALSO
Prima, Prima::Object
perl v5.14.2 2009-02-24 pod::Prima::Timer(3)