Hi all...
(Apologies for any typos at all.)
This is a step by step _script_ to check if your Arduino is talking to your Linux or Macbook Pro computer using the Terminal...
It works on at least 3 Linux flavours and now the Macbook Pro...
I hope you find it useful as a simple check for... (0 Replies)
This is a very simple starter DEMO to access Arduino Diecimila Board for the
Macbook Pro 13" OSX 10.7.5...
A potentiometer is connected between 5V and Gnd with the wiper connected to
ANALOG IN 0 on the Arduino. This was adjusted to give the Ms and Ls as seen...
I now have DC in for this... (0 Replies)
I am working on a semi-auto detection idea for Arduino for the Scope project.
It does require a little user intervention but minimal.
It works by just responding to two on screen prompts to unplug and plug Arduino
into a USB port.
There are two versions and both work perfectly well and give... (3 Replies)
In my further exploration of Arduino, today I decided to install the arduino-cli on my mac today.
https://github.com/arduino/arduino-cli
I followed the instructions for macOS but when I got to this part:
arduino-cli board list
I got the dreaded "Unknown" Fully Qualified Board Name... (1 Reply)
HI all...
(Apologies for any typos.)
To add to Neo's Arduino subject matter I have decided to upload this in ".zip" format.
Ignore "*.info" files these are AMIGA icons only and also the "HAM" drawer as these are photos in ancient AMIGA HAM modes.
I have noticed that there are current... (6 Replies)
Waiting for more fun Ardunio parts from AliExpress, I decided to test two cheap Chinese Arduino UNO clones.
The Arduino UNO R3 (CH340G) MEGA328P
The Wavgat UNO R3 (CH340G) MEGA328P
Both of these Chinese Ardunio clones sell for about $3 USD, delivered to your door.
The bottom line is... (0 Replies)
Just finished a quick Python script to send the current unix time over to the Arduino from macOS, so in the absence of GPS or some other way to get the unix timestamp (epoch time) to the Arduino, I can get my macOS and Arduino UNO synced to within a second.
Normally, when the Arduino starts... (9 Replies)
Here is a sketch to do basic testing for the Arduino UNO and the MLT-BT04.
This BLE module works with IOS (iPhone) and I'll add some details on my IOS testing with an iPhone in a follow-up post.
For now, here is the basic BLE (HM-10) sketch for the Arduino UNO:
/*
Arduino test-code... (7 Replies)
Discussion started by: Neo
7 Replies
LEARN ABOUT DEBIAN
config::model::models::lcdd::cfontzpacket
Config::Model::models::LCDd::CFontzPacket(3pm) User Contributed Perl Documentation Config::Model::models::LCDd::CFontzPacket(3pm)NAME
Config::Model::models::LCDd::CFontzPacket - Configuration class LCDd::CFontzPacket
VERSION
version 2.021
DESCRIPTION
Configuration classes used by Config::Model
generated from LCDd.conf
Elements
Model
Select the LCD model Optional. Type enum. choice: '533', '631', '633', '635'. upstream_default: '633'.
Device
Select the output device to use Optional. Type uniline. upstream_default: '/dev/lcd'.
Contrast
Set the initial contrast Optional. Type integer. upstream_default: '560'.
Brightness
Set the initial brightness Optional. Type integer. upstream_default: '1000'.
OffBrightness
Set the initial off-brightness This value is used when the display is normally switched off in case LCDd is inactive. Optional. Type
integer. upstream_default: '0'.
Reboot
Reinitialize the LCD's BIOS on driver start. Optional. Type enum. choice: 'yes', 'no'. upstream_default: 'no'.
USB
Enable the USB flag if the device is connected to an USB port. For serial ports leave it disabled. Optional. Type enum. choice: 'yes',
'no'. upstream_default: 'no'.
OldFirmware
Very old 633 firmware versions do not support partial screen updates using 'Send Data to LCD' command(31). For those devices it may be
necessary to enable this flag. Optional. Type enum. choice: 'yes', 'no'. upstream_default: 'no'.
Size
Override the LCD size known for the selected model. Usually setting this value should not be necessary.Optional. Type uniline. default:
'20x4'.
Speed
Override the default communication speed known for the selected model. Default value depends on model Optional. Type enum. choice:
'19200', '115200'.
SEE ALSO
o cme
perl v5.14.2 2012-11-09 Config::Model::models::LCDd::CFontzPacket(3pm)