INITTAB(5)						Linux System Administrator's Manual						INITTAB(5)

NAME

       inittab - format of the inittab file used by the sysv-compatible init process

DESCRIPTION

       The  inittab  file describes which processes are started at bootup and during normal operation (e.g. /etc/init.d/boot, /etc/init.d/rc, get-
       tys...).  Init(8) distinguishes multiple runlevels, each of which can have its own set of processes that are started.  Valid runlevels  are
       0-6 plus A, B, and C for ondemand entries.  An entry in the inittab file has the following format:

	      id:runlevels:action:process

       Lines beginning with `#' are ignored.

       id     is  a  unique  sequence  of  1-4 characters which identifies an entry in inittab (for versions of sysvinit compiled with libraries <
	      5.2.18 or a.out libraries the limit is 2 characters).

	      Note: For gettys or other login processes, the id field should be the tty suffix of the corresponding tty, e.g. 1 for tty1.   Other-
	      wise, the login accounting might not work correctly.

       runlevels
	      lists the runlevels for which the specified action should be taken.

       action describes which action should be taken.

       process
	      specifies  the  process to be executed.  If the process field starts with a `+' character, init will not do utmp and wtmp accounting
	      for that process.  This is needed for gettys that insist on doing their own utmp/wtmp housekeeping.  This is also a historic bug.

       The runlevels field may contain multiple characters for different runlevels.  For example, 123 specifies that the process should be started
       in  runlevels  1, 2, and 3.  The runlevels for ondemand entries may contain an A, B, or C.  The runlevels field of sysinit, boot, and boot-
       wait entries are ignored.

       When the system runlevel is changed, any running processes that are not specified for the new runlevel are killed, first with SIGTERM, then
       with SIGKILL.

       Valid actions for the action field are:

       respawn
	      The process will be restarted whenever it terminates (e.g. getty).

       wait   The process will be started once when the specified runlevel is entered and init will wait for its termination.

       once   The process will be executed once when the specified runlevel is entered.

       boot   The process will be executed during system boot.	The runlevels field is ignored.

       bootwait
	      The  process  will  be  executed	during	system	boot, while init waits for its termination (e.g. /etc/rc).  The runlevels field is
	      ignored.

       off    This does nothing.

       ondemand
	      A process marked with an ondemand runlevel will be executed whenever the specified ondemand runlevel is called.	However,  no  run-
	      level change will occur (ondemand runlevels are `a', `b', and `c').

       initdefault
	      An initdefault entry specifies the runlevel which should be entered after system boot.  If none exists, init will ask for a runlevel
	      on the console. The process field is ignored.

       sysinit
	      The process will be executed during system boot. It will be executed before any boot or  bootwait entries.  The runlevels  field	is
	      ignored.

       powerwait
	      The  process  will be executed when the power goes down. Init is usually informed about this by a process talking to a UPS connected
	      to the computer.	Init will wait for the process to finish before continuing.

       powerfail
	      As for powerwait, except that init does not wait for the process's completion.

       powerokwait
	      This process will be executed as soon as init is informormed that the power has been restored.

       powerfailnow
	      This process will be executed when init is told that the battery of the external UPS is almost empty and the power is failing  (pro-
	      vided that the external UPS and the monitoring process are able to detect this condition).

       ctrlaltdel
	      The  process  will  be executed when init receives the SIGINT signal.  This means that someone on the system console has pressed the
	      CTRL-ALT-DEL key combination. Typically one wants to execute some sort of shutdown either to get into single-user level or to reboot
	      the machine.

       kbrequest
	      The process will be executed when init receives a signal from the keyboard handler that a special key combination was pressed on the
	      console keyboard.

	      The documentation for this function is not complete yet; more documentation can be found in the kbd-x.xx packages (most  recent  was
	      kbd-0.94 at the time of this writing). Basically you want to map some keyboard combination to the "KeyboardSignal" action. For exam-
	      ple, to map Alt-Uparrow for this purpose use the following in your keymaps file:

	      alt keycode 103 = KeyboardSignal

EXAMPLES

       This is an example of a inittab which resembles the old Linux inittab:

	      # inittab for linux
	      id:1:initdefault:
	      rc::bootwait:/etc/rc
	      1:1:respawn:/etc/getty 9600 tty1
	      2:1:respawn:/etc/getty 9600 tty2
	      3:1:respawn:/etc/getty 9600 tty3
	      4:1:respawn:/etc/getty 9600 tty4

       This inittab file executes /etc/rc during boot and starts gettys on tty1-tty4.

       A more elaborate inittab with different runlevels (see the comments inside):

	      # Level to run in
	      id:2:initdefault:

	      # System initialization before anything else.
	      si::sysinit:/etc/rc.d/bcheckrc

	      # Runlevel 0,6 is halt and reboot, 1 is maintenance mode.
	      l0:0:wait:/etc/rc.d/rc.halt
	      l1:1:wait:/etc/rc.d/rc.single
	      l2:2345:wait:/etc/rc.d/rc.multi
	      l6:6:wait:/etc/rc.d/rc.reboot

	      # What to do at the "3 finger salute".
	      ca::ctrlaltdel:/sbin/shutdown -t5 -rf now

	      # Runlevel 2&3: getty on console, level 3 also getty on modem port.
	      1:23:respawn:/sbin/getty tty1 VC linux
	      2:23:respawn:/sbin/getty tty2 VC linux
	      3:23:respawn:/sbin/getty tty3 VC linux
	      4:23:respawn:/sbin/getty tty4 VC linux
	      S2:3:respawn:/sbin/uugetty ttyS2 M19200

FILES

       /etc/inittab

AUTHOR

       Init was written by Miquel van Smoorenburg (miquels@cistron.nl).   This	manual	page  was  written  by	Sebastian  Lederer  (lederer@fran-
       cium.informatik.uni-bonn.de) and modified by Michael Haardt (u31b3hs@pool.informatik.rwth-aachen.de).

SEE ALSO

       init(8), telinit(8)

								   May 19, 1998 							INITTAB(5)