Login or Register to Ask a Question and Join Our Community

Sponsored Content
Full Discussion: Dell XPS M1330 doesn't detect optical drive
Special Forums Hardware Dell XPS M1330 doesn't detect optical drive Post 303041989 by milhan on Tuesday 10th of December 2019 11:25:45 AM
Old 12-10-2019
Dell XPS M1330 doesn't detect optical drive
I have a Dell XPS M1330 laptop. The OS is Windows 10. I had to replace the motherboard because it was bad. After replacing the motherboard I noticed the optical (DVD/CD) drive is neither detected in BIOS and OS nor making any noise at all. Everything else seems to be working fine. The optical drive was working before I replaced the motherboard. So I removed the optical drive and the connector cable and cleaned the cable and the pins on the optical drive with a toothbrush and put the laptop back and booted. This time I could hear the optical drive making noise right after I boot. When I tried to insert a CD it accepted the CD and I can hear it spinning. However, the DVD/CD drive is still not listed in BIOS nor in the OS. In the BIOS, it says "none" for fixed bay device. The DVD/CD drive is not listed in the boot menu either when I press F12 to select a boot device.

What does this tell you?
 

7 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Magneto-Optical drive for SCO Openserver 5.0.5

Hi, I tried to install Magneto-Optical (MO) drive Fujutsu to COMPAQ Proliant ML350 with SCO Openserver 5.0.5. Harddisk and MO are connected to Adaptec UW-SCSI-3 (driver ad160). During boot process system shows me that MO is connected to host adapter 1, bus 0, SCSI ID 1 and LUN 0. But when I... (2 Replies)
Discussion started by: yurist
2 Replies

2. UNIX for Dummies Questions & Answers

trying to set up an optical drive

Trying to get my unix system to recognize an optical drive, it was delivered to us, so we assumed it worked, in the 2 years since no one ever has used it, we want to now. However, even running probe-scsi-all doesn't bring up that drive. It's a scsi address of 3, at the end of the chain, all... (1 Reply)
Discussion started by: kymberm
1 Replies

3. Shell Programming and Scripting

Why getopts doesn't detect correctly my switches?

Dear all, I have created a KornShell script containing swiches with getopts (command line switches). Normally, my script should work like this: $ ./myscript.ksh -a 12 -b 4 -c 78 The switch a was selected with the argument 12 The switch b was selected with the argument 4 The switch c was... (3 Replies)
Discussion started by: dariyoosh
3 Replies

4. Solaris

cannot detect NIC card on dell vostro 1500

i installed solaris 5.10 on dell vostro 1500...but it does not detect interface card....i need to pratice networking concepts ............please help me in this regard... (1 Reply)
Discussion started by: vivek_ng
1 Replies

5. Hardware

is rhel 6 compatible with dell xps 14

is rhel 6 compatible with dell xps 14.I tried to install it but could not install.Installation hanged at detecting hardware (1 Reply)
Discussion started by: shamapraveen
1 Replies

6. AIX

AIX doesn't detect TS3200 tape library

Hi all, I have a problem here root@host1 / # lsdev -Cc tape rmt0 Defined 07-00-02 IBM 3580 Ultrium Tape Drive (FCP) rmt1 Defined 07-00-02 IBM 3580 Ultrium Tape Drive (FCP) smc0 Defined 07-00-02 IBM 3573 Tape Medium Changer (FCP) root@host1 / # cfgmgr -l fcs2 Method error... (2 Replies)
Discussion started by: h@foorsa.biz
2 Replies

7. Ubuntu

Ubuntu 16.04 doesn't detect my second monitor

I have Ubuntu 16.04 (dual boot with Windows 10) and a HP Spectre x360 laptop. I have recently bought a Dell Ultrasharp U2515H monitor, which I connect via a Dell docking station. When I plug the docking station to my laptop on Windows, both monitors are detected and everything works fine. ... (23 Replies)
Discussion started by: twelth_hour
23 Replies

LEARN ABOUT DEBIAN

pxfw

pxfw(8) 							     pxfw 0.5								   pxfw(8)

NAME

       pxfw - Firmware flashing tool for Plextor CD/DVD devices

SYNOPSIS

       pxfw -l
       pxfw -d DEVICE [-if firmware.bin] [-u] [-f] [-v]
       pxfw -d DEVICE [-e] [-r] [-t] [-v]

DESCRIPTION

       pxfw is the linux firmware flasher for Plextor CD and DVD drives.  Remove any disks before flashing.

FEATURES

       You can flash the firmware of these drives:
       Plextor Premium, Premium-2, PX-712, PX-716, PX-755 and PX-760.

DEVICE

       can be an IDE, SCSI, SATA, USB or FireWire connected optical drive. Not all SATA controller support all Plextor features.

       Linux:
       /dev/hdX: IDE device
       /dev/scdX: Linux 2.4: SATA, SCSI, USB device, or IDE device via ide-scsi emulation
       /dev/srX: Linux 2.6: IDE device via new ATA layer, SCSI or USB device

       OpenBSD/NetBSD:
       /dev/rcdX

       FreeBSD:
       /dev/cd: SCSI device
       /dev/acd: ATA device

       MacOS X:
       /dev/disk:

       win32:
       C:,D:,E:, ... X:,Y:,Z:

OPTIONS

       -l   scan busses for all available CD and DVD devices

       -if  select inputfile. Specify the firmware binary file, which should
	    be written to DEVICE.

       -u   proceed update. When the firmware checksum test has succeeded,
	    write firmware to DEVICE.

       -f   force flashing. Even if DEVICE is not recognized, or firmware.
	    checksum has failed, firmware writing will be forced.
	    Handle with care.

       -e   read EEPROM from DEVICE.

       -r   reboot the device.

       -t   test which opcodes are supported by the device.

       -v   debug.

EXAMPLES

       pxfw -d /dev/hdc -if 755_1.07.bin -u
       writes firmware file 755_1.07.bin into Master Drive on Secondary IDE-Port.

       pxfw -d /dev/sr3 -e -oe file.foo
       reades EEPROM from device /dev/sr3 and writes it to file.foo.

       please report man page improvements to T.Maguin@web.de

Gennady ShultZ Kozlov						  02 April, 2009							   pxfw(8)
All times are GMT -4. The time now is 08:24 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy