Either I try to boot from USB bootable drive or from a bootable dvdrom, I am receiving a message ERROR: boot-read fail
Code:
{0} ok probe-scsi-all
This command may hang the system if a Stop-A or halt command
has been executed. Please type reset-all to reset the system
before executing this command.
Do you wish to continue? (y/n) y
/pci@400/pci@2/pci@0/pci@f/pci@0/usb@0,2/hub@2/storage@1
Unit 0 Removable Disk KingstonDataTraveler 3.0PMAP
/pci@400/pci@2/pci@0/pci@f/pci@0/usb@0,2/hub@2/hub@3/storage@2
Unit 0 Removable Read Only device AMI Virtual CDROM 1.00
/pci@400/pci@2/pci@0/pci@4/scsi@0
FCode Version 1.00.61, MPT Version 2.00, Firmware Version 9.05.00.00
Target 9
Unit 0 Removable Read Only device TEAC DV-W28SS-W 1.0A
SATA device PhyNum 6
/pci@400/pci@1/pci@0/pci@4/scsi@0
FCode Version 1.00.61, MPT Version 2.00, Firmware Version 9.05.00.00
{0} ok
Code:
boot /pci@400/pci@2/pci@0/pci@f/pci@0/usb@0,2/hub@2/storage@1
Boot device: /pci@400/pci@2/pci@0/pci@f/pci@0/usb@0,2/hub@2/storage@1 File and args:
ERROR: boot-read fail
Boot load failed
{0} ok boot /pci@400/pci@2/pci@0/pci@f/pci@0/usb@0,2/hub@2/hub@3/storage@2
SPARC T4-1, Keyboard Present
Copyright (c) 1998, 2013, Oracle and/or its affiliates. All rights reserved.
OpenBoot 4.34.3, 15872 MB memory available, Serial #104523236.
Ethernet address 0:10:e0:3a:e5:e4, Host ID: 863ae5e4.
Boot device: /pci@400/pci@2/pci@0/pci@f/pci@0/usb@0,2/hub@2/hub@3/storage@2 File and args:
ERROR: boot-read fail
Evaluating:
Boot load failed
{0} ok
Dears,
I've written a script which allows me to send mails in different formats with different attaches. Now I still want to add a feature to this script. My users would like to be able to receive a "read" or "delivered" receipt for their mails.
The script send mails on behalve of an specific... (1 Reply)
Hallo,
i need a Prompting read in my script:
read -p "Enter your command: " command
But i always get this Error:
-p: is not an identifier
When I run these in c-shell i get this error
/usr/bin/read: read: bad option(s)
How can I use a Prompt in the read command? (9 Replies)
Hello!
Sorry, for my not so perfect english!
I want to stop bash shell script execution until any key is pressed.
This line in a bash shell script
read -n1 -r -p "Press any key to continue..." key
produces this error
When I run this from the command line
usera@lynx:~$ read... (4 Replies)
Hi,
I have line in input file as below:
3G_CENTRAL;INDONESIA_(M)_TELKOMSEL;SPECIAL_WORLD_GRP_7_FA_2_TELKOMSEL
My expected output for line in the file must be :
"1-Radon1-cMOC_deg"|"LDIndex"|"3G_CENTRAL|INDONESIA_(M)_TELKOMSEL"|LAST|"SPECIAL_WORLD_GRP_7_FA_2_TELKOMSEL"
Can someone... (7 Replies)
Hi,
Could anyone please shed some light on the following script lines and what is it doing as it was written by an ex-administrator?
cat $AMS/version|read a b verno d
DBVer=$(/usr/bin/printf "%7s" $verno)
I checked that the cat $AMS/version command returns following output:
... (10 Replies)
I've a Sun V440 machine, and it's running solaris 10 .. for some reason i need to install a fresh copy of solaris 10. for that i've prepared solaris 10 dvd but surprisingly i found there is no any dvd rom on this machine, so i've took a dvd rom from a V240 machine and inserted on V440.
after... (3 Replies)
I want to print any matching IP addresse in List1 with List 2;
List 1
List of IP addresses;
161.85.58.210
250.57.15.129
217.23.162.249
74.76.129.101
30.221.177.237
3.147.200.59
170.58.142.64
127.65.109.33
150.167.242.146
223.3.20.186
25.181.180.99
2.55.199.32 (3 Replies)
How to use "mailx" command to do e-mail reading the input file containing email address, where column 1 has name and column 2 containing “To” e-mail address
and column 3 contains “cc” e-mail address to include with same email.
Sample input file, email.txt
Below is an sample code where... (2 Replies)
When I power ON my T4-1, I got a prompt -> where I have to start /SYS and start /SP/console. How can I auto supply these two commands ? (3 Replies)
Discussion started by: z_haseeb
3 Replies
LEARN ABOUT NETBSD
mpt
MPT(4) BSD Kernel Interfaces Manual MPT(4)NAME
mpt -- LSI Fusion-MPT SCSI/Fibre Channel driver
SYNOPSIS
mpt* at pci? dev ? function ?
scsibus* at mpt?
DESCRIPTION
The mpt driver provides support for the LSI Logic Fusion-MPT family of SCSI and Fibre Channel and SAS controllers:
o 53c1020 (Ultra320 SCSI)
o 53c1030 (Dual Ultra320 SCSI)
o AS1068 (SAS/SATA)
o FC909 (1Gb/s Fibre Channel)
o FC909A (Dual 1Gb/s Fibre Channel)
o FC919 (2Gb/s Fibre Channel)
o FC919X (2Gb/s Fibre Channel, PCI-X)
o FC929 (Dual 2Gb/s Fibre Channel)
o FC929X (Dual 2Gb/s Fibre Channel, PCI-X)
SEE ALSO cd(4), ch(4), intro(4), pci(4), scsi(4), sd(4), siop(4), st(4), uk(4)HISTORY
The mpt driver first appeared in NetBSD 2.0.
AUTHORS
The mpt driver was originally written for FreeBSD by Greg Ansley . It was ported to NetBSD by Jason R. Thorpe and contributed by Wasabi Sys-
tems, Inc.
BSD February 16, 2009 BSD