10-04-2019
I reckon your NVRAM contents are still screwed and the console output is being redirected somewhere (probably to the first serial port).
If you can't get to the OBP to change this then the only option is to hold down STOP-N as it boots (you might need to do that a few times) to reset all the NVRAM to default. Unfortunately this means re-doing the setup that you've already done.
If that doesn't work then it is probably a hardware fault.
Hope that helps.
This User Gave Thanks to hicksd8 For This Post:
10 More Discussions You Might Find Interesting
1. Solaris
Hello everybody,
I installed sun solaris i86 , the programme installation install the
"Mini Root" and after that he doing shutdown.
the camputer coming up and he can't boot.
how i can to resuled this problem ???
Thenk you in advence..... (2 Replies)
Discussion started by: yanly
2 Replies
2. Solaris
Hi,
I have a sun ultra enterprise 450 server. This server powers on and a white screen appears with the system and network information.
But it doesnot boot up completely. Booting operation wil be halted by a warning:
\usr\sbin\fsck not found. Most likely the mount of \usr failed or the... (5 Replies)
Discussion started by: tgashwini
5 Replies
3. Solaris
Hello
I have install new NIC ,that's RTL8139 in SUN U10 but it not work (or not detect I don't know :p)
in "ifconfig -a" it show only lo0 and hme0
in "ifconfig hme1 plumb" it show
SIOCSLIFNAME for ip: hme1 :no such interface
and there's some file that I change
/ect/hosts
... (4 Replies)
Discussion started by: Harmut
4 Replies
4. Solaris
Newbie question.
I've been running OpenSolaris on an Intel box for some time with great success.
I have just bought an old Sun Blade workstation with a corrupted version of Solaris 5 something on it.
The plan was to install OpenSolaris on it.
However beyond my skills, I see, as no Live CD (or... (10 Replies)
Discussion started by: lewtargett
10 Replies
5. Solaris
Hi All
I have a problem on T2000 server.
bash-3.00# uname -a
SunOS 5.10 aaa Generic_120011-14 sun4v sparc SUNW,Netra-T2000After the initial solaris installation server failed to boot:
Rebooting with command: boot
Boot device: disk:b File and args:
The file just loaded does not appear... (1 Reply)
Discussion started by: ouzist
1 Replies
6. Solaris
Hi all.
I am seeing in one of our less-used servers that it crashed and now won't restart. I get the message 'continue with normal startup or boot into maintenance mode'.
I go into maintenance and run fsck on /usr0 (mentioned in error at restart) it then reboots but goes right back to... (3 Replies)
Discussion started by: jamie_collins
3 Replies
7. UNIX for Dummies Questions & Answers
Folks;
My SUN Ultra 10 5.9 won't boot. It only stops after counting the memory on the white screen then hangs there with nothing. even the power button won't take it down from there, i had to unplug it then re-plug it again.
i inserted a disk with Solaris 9 iso trying to rebuild it but nothing... (1 Reply)
Discussion started by: Katkota
1 Replies
8. Hardware
hello
i have a sun server V890 and it stops booting after adding 2 CPUs modules and gives me the following error message:
Enabling system bus....... Done
Initializing CPUs......... Done
Initializing boot memory..
RAM-Copy CRC failure!Can't start: No image found
FATAL: Can't find/decompress... (0 Replies)
Discussion started by: bahjatm
0 Replies
9. Hardware
Hi all!
I have a Sun JavaStation-1 which doesn't boot: when I turn on the power switch, the power led becomes lit but the screen remains black (going in power save after about 5 seconds). :eek:
Now my question is: could be this problem due to a dead IDPROM? :confused:
I have this doubt because... (0 Replies)
Discussion started by: wisechip
0 Replies
10. Solaris
Hi all,
I've just replaced the eprom battery on my Sun Ultra-30 and having boot issues. For some reason its trying to boot off the network instead of the DISK1. Howe can I change it so the open boot does not default to the boot device: NET
Thanks,
Rob (3 Replies)
Discussion started by: robbo007
3 Replies
LEARN ABOUT SUNOS
console
console(7D) Devices console(7D)
NAME
console - STREAMS-based console interface
SYNOPSIS
/dev/console
DESCRIPTION
The file /dev/console refers to the system console device. /dev/console should be used for interactive purposes only. Use of /dev/console
for logging purposes is discouraged; syslog(3C) or msglog(7D) should be used instead.
The identity of this device depends on the EEPROM or NVRAM settings in effect at the most recent system reboot; by default, it is the
``workstation console'' device consisting of the workstation keyboard and frame buffer acting in concert to emulate an ASCII terminal (see
wscons(7D)).
Regardless of the system configuration, the console device provides asynchronous serial driver semantics so that, in conjunction with the
STREAMS line discipline module ldterm(7M), it supports the termio(7I) terminal interface.
SEE ALSO
syslog(3C), termios(3C), ldterm(7M), termio(7I), msglog(7D), wscons(7D)
NOTES
In contrast to pre-SunOS 5.0 releases, it is no longer possible to redirect I/O intended for /dev/console to some other device. Instead,
redirection now applies to the workstation console device using a revised programming interface (see wscons(7D)). Since the system console
is normally configured to be the work station console, the overall effect is largely unchanged from previous releases.
See wscons(7D) for detailed descriptions of control sequence syntax, ANSI control functions, control character functions and escape
sequence functions.
SunOS 5.10 23 Apr 1999 console(7D)