10-04-2019
I reckon your NVRAM contents are still screwed and the console output is being redirected somewhere (probably to the first serial port).
If you can't get to the OBP to change this then the only option is to hold down STOP-N as it boots (you might need to do that a few times) to reset all the NVRAM to default. Unfortunately this means re-doing the setup that you've already done.
If that doesn't work then it is probably a hardware fault.
Hope that helps.
This User Gave Thanks to hicksd8 For This Post:
10 More Discussions You Might Find Interesting
1. Solaris
Hello everybody,
I installed sun solaris i86 , the programme installation install the
"Mini Root" and after that he doing shutdown.
the camputer coming up and he can't boot.
how i can to resuled this problem ???
Thenk you in advence..... (2 Replies)
Discussion started by: yanly
2 Replies
2. Solaris
Hi,
I have a sun ultra enterprise 450 server. This server powers on and a white screen appears with the system and network information.
But it doesnot boot up completely. Booting operation wil be halted by a warning:
\usr\sbin\fsck not found. Most likely the mount of \usr failed or the... (5 Replies)
Discussion started by: tgashwini
5 Replies
3. Solaris
Hello
I have install new NIC ,that's RTL8139 in SUN U10 but it not work (or not detect I don't know :p)
in "ifconfig -a" it show only lo0 and hme0
in "ifconfig hme1 plumb" it show
SIOCSLIFNAME for ip: hme1 :no such interface
and there's some file that I change
/ect/hosts
... (4 Replies)
Discussion started by: Harmut
4 Replies
4. Solaris
Newbie question.
I've been running OpenSolaris on an Intel box for some time with great success.
I have just bought an old Sun Blade workstation with a corrupted version of Solaris 5 something on it.
The plan was to install OpenSolaris on it.
However beyond my skills, I see, as no Live CD (or... (10 Replies)
Discussion started by: lewtargett
10 Replies
5. Solaris
Hi All
I have a problem on T2000 server.
bash-3.00# uname -a
SunOS 5.10 aaa Generic_120011-14 sun4v sparc SUNW,Netra-T2000After the initial solaris installation server failed to boot:
Rebooting with command: boot
Boot device: disk:b File and args:
The file just loaded does not appear... (1 Reply)
Discussion started by: ouzist
1 Replies
6. Solaris
Hi all.
I am seeing in one of our less-used servers that it crashed and now won't restart. I get the message 'continue with normal startup or boot into maintenance mode'.
I go into maintenance and run fsck on /usr0 (mentioned in error at restart) it then reboots but goes right back to... (3 Replies)
Discussion started by: jamie_collins
3 Replies
7. UNIX for Dummies Questions & Answers
Folks;
My SUN Ultra 10 5.9 won't boot. It only stops after counting the memory on the white screen then hangs there with nothing. even the power button won't take it down from there, i had to unplug it then re-plug it again.
i inserted a disk with Solaris 9 iso trying to rebuild it but nothing... (1 Reply)
Discussion started by: Katkota
1 Replies
8. Hardware
hello
i have a sun server V890 and it stops booting after adding 2 CPUs modules and gives me the following error message:
Enabling system bus....... Done
Initializing CPUs......... Done
Initializing boot memory..
RAM-Copy CRC failure!Can't start: No image found
FATAL: Can't find/decompress... (0 Replies)
Discussion started by: bahjatm
0 Replies
9. Hardware
Hi all!
I have a Sun JavaStation-1 which doesn't boot: when I turn on the power switch, the power led becomes lit but the screen remains black (going in power save after about 5 seconds). :eek:
Now my question is: could be this problem due to a dead IDPROM? :confused:
I have this doubt because... (0 Replies)
Discussion started by: wisechip
0 Replies
10. Solaris
Hi all,
I've just replaced the eprom battery on my Sun Ultra-30 and having boot issues. For some reason its trying to boot off the network instead of the DISK1. Howe can I change it so the open boot does not default to the boot device: NET
Thanks,
Rob (3 Replies)
Discussion started by: robbo007
3 Replies
LEARN ABOUT DEBIAN
tpm_nvread
tpm_nvread(8) tpm_nvread(8)
NAME
tpm_nvread
SYNOPSIS
tpm_nvread [OPTIONS]
DESCRIPTION
tpm_nvread reads data from an NVRAM area and either displays them or writes them into a file. The user must provide the index of the NVRAM
area. If the user provided the number of bytes to read then this will be the maximum number of bytes that will be read from the NVRAM area,
otherwise the whole NVRAM area will be read. Some NVRAM areas only allow read sizes of zero, i.e., NVRAM area with index 0. Optionally an
offset into the NVRAM area can be given where the reading of the data is to start. If the NVRAM area has permission bits set that require
owner or NVRAM area authentication, then the password must be provided via the password option.
The following options are supported:
-h, --help
Display command usage info.
-v, --version
Display command version info.
-l, --log [none|error|info|debug]
Set logging level.
-u, --unicode
Use TSS UNICODE encoding for passwords to comply with applications using TSS popup boxes
-z, --well-known
Use a secret of all zeros (20 bytes of zeros) as either the NVRAM area or owner secret.
-p, --password
Depending on what type of authentication is required for the NVRAM area, this must either be the NVRAM area or owner password.
A password may be directly provided for example by using '--password=password' or '-ppassword'. If no password is provided then the
program will prompt the user for the password.
-i, --index
The index of the NVRAM area. The parameter may either be a decimal number or a hexadecimal number starting with '0x'.
-s, --size
The number of bytes to read from the NVRAM area. The parameter may either be a decimal number or a hexadecimal number starting with
'0x'.
-n, --offset (optional parameter)
The offset into the NVRAM area from where to start reading. The parameter may either be a decimal number or a hexadecimal number
starting with '0x'.
-f, --filename (optional parameter)
The name of a file the read data will be written into. If no filename is given the data will be printed to stdout.
SEE ALSO
tpm_nvdefine(8), tpm_nvinfo(8), tpm_nvrelease(8), tpm_nvwrite(8)
REPORTING BUGS
Report bugs to <trousers-users@lists.sourceforge.net>
TPM Management 2011-07-11 tpm_nvread(8)