09-23-2019
Hi,
This would indicate that the server was already connected to the SAN and that the command has been run to stop the system displaying multiple paths for each device, normally the first time you run stsmbooyt a reboot is required.
Regards
Gull04
8 More Discussions You Might Find Interesting
1. Solaris
Hi guys,
I havent done this before but iam trying to create an image of a mirrorred drive.
Correct me if iam wrong, but when i have two disks setup in raid configuration and have them mirrored in solaris. It then defines at one entity.
How would i create a "flar" image of that one entity... (3 Replies)
Discussion started by: tlee
3 Replies
2. Linux
Hi all,
Currently i am involved in developing a device driver for a custom hardware.
My linux stack already has the sysfs directory structure
/sys/class/hwmon/
My need is that, while loading my device driver i need to create a "xyz" sysfs directory inside hwmon sysfs directory as... (0 Replies)
Discussion started by: cbalu
0 Replies
3. Red Hat
I have an HP blade with Qlogic HBA's connected to an EVA8000. I have downloaded the latest multipath.conf from HP's website. The drive presented to the server appears to be configured and working except the output of "multipath -l" shows for all paths. What is causing this output?
mpath0... (2 Replies)
Discussion started by: manzier
2 Replies
4. Linux
hello
my centOS newly installed system loading dmraid modules on startup
I did remove all LVM/raid things from system installation menus and after installation too but dmraid is still there
and he says: no raid disks found
also I did modprobe -r dm_raid45 and it do remove it but only until... (7 Replies)
Discussion started by: tip78
7 Replies
5. Red Hat
Hi,
How to find the raw device/multipath details of the LUN used by the diskgroups of the database.
file system type -- ASM
Oracle -- 11.2.0.3.0
OS -- Linux
This is RAC database.
Regards,
Maddy (2 Replies)
Discussion started by: Maddy123
2 Replies
6. Linux
Hi all
I have a system running:
uname -o
GNU/Linux
that has already some file systems created:
df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg_outsystemdb-lv_root
50G 2.7G 45G 6% /
tmpfs 28G 72K 28G 1%... (5 Replies)
Discussion started by: fretagi
5 Replies
7. HP-UX
Hi,
Unable to make tape backup, please help.
/opt/ignite/bin/make_tape_recovery -a /dev/rmt/?mn -I -v -m tar -x inc_entire=vg00
* Creating local directories for configuration files and archive.
======= 04/25/16 16:28:08 IST Started /opt/ignite/bin/make_tape_recovery.
(Mon... (4 Replies)
Discussion started by: anuragr
4 Replies
8. Red Hat
Hi,
I am testing on iSCSI + multipath, where i have one iSCSI lun assigned to one server.
mpatha (1IET 00010001) dm-2 IET,VIRTUAL-DISK
size=100M features='0' hwhandler='0' wp=rw
|-+- policy='round-robin 0' prio=1 status=active
| `- 2:0:0:1 sda 8:0 active ready running
`-+-... (6 Replies)
Discussion started by: linux.amrit
6 Replies
reboot(1M) reboot(1M)
NAME
reboot - reboot the system
SYNOPSIS
time] message]
time] message]
DESCRIPTION
The command terminates all currently executing processes except those essential to the system, then reboots the system, or halts, or makes
the partition ready for reconfiguration. When invoked without arguments, syncs all disks before rebooting the system.
Options
The command recognizes the following options:
Shut down the system and halt.
Shut down the system and reboot automatically (default).
Shut down the system to a ready-to-reconfigure state and reboot if possible.
If the partition is unable to reboot, it will stop at a ready-to-reconfigure state. However, if the option is also
specified, the system will always stop at ready-to-reconfigure state. This option is available only on systems that
support hardware partitions.
Shut down the system to a ready-to-reconfigure state and do not reboot.
This option can be used only in combination with the option. This option is available only on systems that support
hardware partitions.
Do not sync the file systems before shutdown.
The and options are ignored with this option.
Sync the file systems before shutdown;
for file systems that were cleanly mounted, modify the flag from to (default).
Quick and quiet.
Suppress broadcast of warning messages, terminate processes by brute force (with and immediately call with arguments
as indicated by the other options (see reboot(2)). No logging is performed. The and options are ignored with this
option.
Specify what time
will bring the system down. time can be the word (indicating immediate shutdown) or a future time in one of two for-
mats: and The first form brings the system down in number minutes; the second brings the system down at the time of
day indicated (based on a 24-hour clock).
Display message at the terminals of all users on the system at decreasing intervals as reboot time approaches. The message
must not contain any embedded double quotes.
At shutdown time a message is written in the file
(if it exists), containing the time of shutdown, who ran and the reason.
Only users with appropriate privileges can execute the command.
WARNINGS
does not invoke the shutdown scripts associated with subsystems to bring them down in a cautious manner. See shutdown(1M).
If the option is used in a virtual partition environment on a partitionable system, then the requested reconfiguration will not take place
until all the virtual partitions on that hard partition are shut down and the virtual partition monitor is rebooted.
AUTHOR
was developed by HP and the University of California, Berkeley.
FILES
Shutdown log
SEE ALSO
vpartition(1), reboot(2), partition(5).
reboot(1M)