Hi guys,
I havent done this before but iam trying to create an image of a mirrorred drive.
Correct me if iam wrong, but when i have two disks setup in raid configuration and have them mirrored in solaris. It then defines at one entity.
How would i create a "flar" image of that one entity... (3 Replies)
Hi all,
Currently i am involved in developing a device driver for a custom hardware.
My linux stack already has the sysfs directory structure
/sys/class/hwmon/
My need is that, while loading my device driver i need to create a "xyz" sysfs directory inside hwmon sysfs directory as... (0 Replies)
I have an HP blade with Qlogic HBA's connected to an EVA8000. I have downloaded the latest multipath.conf from HP's website. The drive presented to the server appears to be configured and working except the output of "multipath -l" shows for all paths. What is causing this output?
mpath0... (2 Replies)
hello
my centOS newly installed system loading dmraid modules on startup
I did remove all LVM/raid things from system installation menus and after installation too but dmraid is still there
and he says: no raid disks found
also I did modprobe -r dm_raid45 and it do remove it but only until... (7 Replies)
Hi,
How to find the raw device/multipath details of the LUN used by the diskgroups of the database.
file system type -- ASM
Oracle -- 11.2.0.3.0
OS -- Linux
This is RAC database.
Regards,
Maddy (2 Replies)
Hi all
I have a system running:
uname -o
GNU/Linux
that has already some file systems created:
df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg_outsystemdb-lv_root
50G 2.7G 45G 6% /
tmpfs 28G 72K 28G 1%... (5 Replies)
Hi,
Unable to make tape backup, please help.
/opt/ignite/bin/make_tape_recovery -a /dev/rmt/?mn -I -v -m tar -x inc_entire=vg00
* Creating local directories for configuration files and archive.
======= 04/25/16 16:28:08 IST Started /opt/ignite/bin/make_tape_recovery.
(Mon... (4 Replies)
Hi,
I am testing on iSCSI + multipath, where i have one iSCSI lun assigned to one server.
mpatha (1IET 00010001) dm-2 IET,VIRTUAL-DISK
size=100M features='0' hwhandler='0' wp=rw
|-+- policy='round-robin 0' prio=1 status=active
| `- 2:0:0:1 sda 8:0 active ready running
`-+-... (6 Replies)
Discussion started by: linux.amrit
6 Replies
LEARN ABOUT CENTOS
gnome-disks
GNOME-DISKS(1) gnome-disk-utility GNOME-DISKS(1)NAME
gnome-disks - the GNOME Disks application
SYNOPSIS
gnome-disks [OPTIONS]
DESCRIPTION
gnome-disks is the command to launch the GNOME Disks application. Disks provides a way to inspect, format, partition and configure disks
and block devices.
The Disks application is single-instance. What this means is that if the application is not already running when the gnome-disks command is
invoked, it will get launched and the command invocation will block until the application exits. Otherwise the existing application
instance will be used and the gnome-disks command will exit immediately.
OPTIONS
The following options are understood:
--block-device DEVICE
Switches to the Disks application and selects the block device given by DEVICE (for example, /dev/sda).
--block-device DEVICE --format-device [--xid WINDOW-ID]
Shows the "Format Volume" dialog for the block device given by DEVICE (for example, /dev/sdb1). If WINDOW-ID is given, makes the dialog
transient to the given XID.
--help
Prints a short help text and exits.
AUTHOR
Written by David Zeuthen <zeuthen@gmail.com> with a lot of help from many others.
BUGS
Please send bug reports to either the distribution bug tracker or the upstream bug tracker at
https://bugzilla.gnome.org/enter_bug.cgi?product=gnome-disk-utility.
SEE ALSO gnome-disk-image-mounter(1), udisks(8)GNOME March 2013 GNOME-DISKS(1)