Hi guys,
I havent done this before but iam trying to create an image of a mirrorred drive.
Correct me if iam wrong, but when i have two disks setup in raid configuration and have them mirrored in solaris. It then defines at one entity.
How would i create a "flar" image of that one entity... (3 Replies)
Hi all,
Currently i am involved in developing a device driver for a custom hardware.
My linux stack already has the sysfs directory structure
/sys/class/hwmon/
My need is that, while loading my device driver i need to create a "xyz" sysfs directory inside hwmon sysfs directory as... (0 Replies)
I have an HP blade with Qlogic HBA's connected to an EVA8000. I have downloaded the latest multipath.conf from HP's website. The drive presented to the server appears to be configured and working except the output of "multipath -l" shows for all paths. What is causing this output?
mpath0... (2 Replies)
hello
my centOS newly installed system loading dmraid modules on startup
I did remove all LVM/raid things from system installation menus and after installation too but dmraid is still there
and he says: no raid disks found
also I did modprobe -r dm_raid45 and it do remove it but only until... (7 Replies)
Hi,
How to find the raw device/multipath details of the LUN used by the diskgroups of the database.
file system type -- ASM
Oracle -- 11.2.0.3.0
OS -- Linux
This is RAC database.
Regards,
Maddy (2 Replies)
Hi all
I have a system running:
uname -o
GNU/Linux
that has already some file systems created:
df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg_outsystemdb-lv_root
50G 2.7G 45G 6% /
tmpfs 28G 72K 28G 1%... (5 Replies)
Hi,
Unable to make tape backup, please help.
/opt/ignite/bin/make_tape_recovery -a /dev/rmt/?mn -I -v -m tar -x inc_entire=vg00
* Creating local directories for configuration files and archive.
======= 04/25/16 16:28:08 IST Started /opt/ignite/bin/make_tape_recovery.
(Mon... (4 Replies)
Hi,
I am testing on iSCSI + multipath, where i have one iSCSI lun assigned to one server.
mpatha (1IET 00010001) dm-2 IET,VIRTUAL-DISK
size=100M features='0' hwhandler='0' wp=rw
|-+- policy='round-robin 0' prio=1 status=active
| `- 2:0:0:1 sda 8:0 active ready running
`-+-... (6 Replies)
Discussion started by: linux.amrit
6 Replies
LEARN ABOUT HPUX
vxdmp
vxdmp(7) Miscellaneous Information Manual vxdmp(7)NAME
vxdmp - Veritas Volume Manager multipathing disk devices
DESCRIPTION
Multipathed disk devices in Veritas Volume Manager (VxVM) represent virtual devices with one or more physical access paths to a physical
disk. The Multipathing feature provides disk access reliability by dynamically switching to another physical path if there is a path fail-
ure.
Every disk that is visible to VxVM is represented by a multipath device node in the /dev/vx/dmp and /dev/vx/rdmp directories for block type
and character type interfaces. A simple disk is represented by a multipath device having one physical path, whereas a disk that is part of
a multiported disk array is represented by a multipath device with many device access paths depending upon the type of the disk array.
VxVM uses standard disk device naming conventions to name multipath devices. For example, if there is a disk device with two physical
access paths such as c1t0d0 and c2t0d0, the multipathing device node for this particular disk is created under /dev/vx/dmp and /dev/vx/rdmp
as c1t0d0 or c2t0d0.
To provide multipathing, VxVM maintains an internal database of all the multipathed devices detected by the system and their respective
paths. The database is created at system boot time. When disks are added or removed from the system, VxVM provides support to reconfigure
the multipath device database to reflect new states of the hardware, while the system is online.
To reconfigure the DMP database, run ioscan followed by insf, and then invoke vxdctl enable (see vxdctl(1M)).
The various access paths to a multipathed device can be seen by using a vxdisk command (see vxdisk(1M)). These commands open the multi-
pathing configuration device /dev/vx/dmpconfig to obtain the required information about the various paths to a multipathed device and their
states.
VxVM also provides the facility to enable or disable a disk controller. This feature can be used to stop all I/Os through a particular con-
troller to perform maintenance operations on it. Use the vxdmpadm command to do this and also perform other operations on the multipath
device database.
VxVM can provide notification about events that occur in the DMP database due to a change in hardware. See the vxnotify(1M) man page for
more information.
VxVM is capable of multipathing both Active/Active and Active/Passive disk arrays.
FILES
/dev/vx/dmp Multipathing block devices.
/dev/vx/rdmp Multipathing character devices.
SEE ALSO ioctl(2), vxdctl(1M), vxdisk(1M), vxdmpadm(1M), vxnotify(1M)VxVM 5.0.31.1 24 Mar 2008 vxdmp(7)