It's 5.3-rc4 now and with option LOGITECH_DJ=y mouse does what it should.
Same old story, we're having the ideas and do the basic development of lota, lota, lota firm-, soft- and hardware; we are selling it to closed-source-based-systems - because of a lack of material sourroundigs (that's the reason why I didn't buy a new mouse - mostly far under the worth of it (!!!) --- after 5 years or so on the market for so(u)c(k) we get it back to make it again compatible with linux and it's probably not a good impression for thoose competitors what our programmers get to see what has been done with the original firmware and drivers, p.E. just look at the gst-plugins!
For me aequivalents are not right, not measurement-question in relation to personal state of programmers but a question of potential of the good. Normally it is a corrupt capitalism withough remorse -
So one hand has the material stuff, others don't believe in; other have their ideals, that ones not able to appreciate; wrong, wrong
Code:
make buildworld -j4
, BSD says and I bet we can wait for good 'til we get the most important thinggs for Haiku from the old BeOS back!
Help! My mouse gave up the ghost, so I connected a USB wheel mouse, and chose it from the list in Suse's Yast2. Also installed it in Windows 98 on the same machine. It works fine in both linux and Windows 98, except for this fact:
I have to reinstall it every time I boot into Linux.... (1 Reply)
:confused:
I am using Linux for a while and now changed to slackware for my study and it is not as good as redhat everytime when you add this or that it needs either configure modules or recompile kernel
Now I changed from PS/2 mouse to USB trouble starts it refuse to work I know I can... (3 Replies)
Dear friends,
My mouse can not work in my Solaris 10 machine. The mouse itself is OK, i can use it without problems in my colleagues' Unixs.
I outstationed for a few weeks, after came back, it can not work already.
The cursor will float in the centre of my screen and can never move,... (1 Reply)
Dear frends,
My mouse in Solaris 10 machine has just failed today. The mouse itself is physically Ok, I can use it in my colleagues' Unix.
In my own box, the cursor is just floating in the centre of screen.
Any suggestions? Any method to check / modify hardware in solaris 10?
thanks! (2 Replies)
Howdie everyone...
I have a shell script RemoveFiles.sh
Inside this file, it only has two commands as below:
rm -f ../../reportToday/temp/*
rm -f ../../report/*
My problem is that when i execute this script, nothing happened. Files remained unremoved. I don't see any error message as it... (2 Replies)
hi folks,
i've got a blank hp visualize C3000 workstation and installed HP-UX 11.11. When I want to start X, I get the following error message:
# X
Fatal server error:
Couldn't open X pointer device! Is one attached?
I've connected an mouse and a keyboard with an usb/ps2 connector.... (5 Replies)
I have 64bit 11.1 installed on a clone. The Logitech LX3 mouse stops working sometimes, forcing a reboot. The LED under the mouse goes dark when this happens. A normal ps/2 mouse works fine, and I am certain the LX3 mouse is not defective as I have an identical one on a XP system that I swapped to... (6 Replies)
Hi,
Is someone knows how or maybe the caused why my USB 3G dongle doesn't work when plug-in after boot the /dev/ttyUSB*
I wonder how this /dev/ttyUSB1-4 works, i had a 3G USB dongle for my internet connection before i used lucyd lynx this the same USB dongle works fine when i plug-in after... (2 Replies)
Running Slackware 13.37 original without updates.
Need to replace my trackball with optical mouse temporarily.
There is no xf86config file anylonger but xorg.conf file is produced automatically.
I see 2 "xorg.conf" files which can be and were modified on installation:
1) /etc/X11/xorg.conf-vesa... (2 Replies)
Discussion started by: slak0
2 Replies
LEARN ABOUT OPENDARWIN
intro
INTRO(9) BSD Kernel Developer's Manual INTRO(9)NAME
intro -- introduction to system kernel interfaces
DESCRIPTION
This section contains information about the interfaces and subroutines in the kernel.
PROTOTYPES ANSI-C AND ALL THAT
Yes please.
We would like all code to be fully prototyped.
If your code compiles cleanly with cc -Wall we would feel happy about it. It is important to understand that this isn't a question of just
shutting up cc, it is a question about avoiding the things it complains about. To put it bluntly, don't hide the problem by casting and
other obfuscating practices, solve the problem.
INDENTATION AND STYLE
Believe it or not, there actually exists a guide for indentation and style. It isn't generally applied though.
We would appreciate if people would pay attention to it, and at least not violate it blatantly.
We don't mind it too badly if you have your own style, but please make sure we can read it too.
Please take time to read style(9) for more information.
NAMING THINGS
Some general rules exist:
1. If a function is meant as a debugging aid in DDB, it should be enclosed in
#ifdef DDB
#endif /* DDB */
And the name of the procedure should start with the prefix DDB_ to clearly identify the procedure as a debugger routine.
SCOPE OF SYMBOLS
It is important to carefully consider the scope of symbols in the kernel. The default is to make everything static, unless some reason
requires the opposite.
There are several reasons for this policy, the main one is that the kernel is one monolithic name-space, and pollution is not a good idea
here either.
For device drivers and other modules that don't add new internal interfaces to the kernel, the entire source should be in one file if possi-
ble. That way all symbols can be made static.
If for some reason a module is split over multiple source files, then try to split the module along some major fault-line and consider using
the number of global symbols as your guide. The fewer the better.
SEE ALSO style(9)HISTORY
The intro section manual page appeared in FreeBSD 2.2.
BSD December 13, 1995 BSD
08-14-2019
- mostly far under the worth of it (!!!) --- after 5 years or so on the market for so(u)c(k) we get it back to make it again compatible with linux and it's probably not a good impression for thoose competitors what our programmers get to see what has been done with the original firmware and drivers, p.E. just look at the gst-plugins!