Did you correctly (with wait) configure the ftpd in /etc/inetd.conf ?
yes, i have this like ... but i dont know much around config this:
Code:
# @(#)$Id: inetd.conf,v 6.8 1996/01/09 21:48:54 aes Exp $ - STREAMware TCP/
IP source
#
# Copyrighted as an unpublished work.
# (c) Copyright 1987-1994 Legent Corporation
# All rights reserved.
#
# SCCS IDENTIFICATION
ftp stream tcp nowait root /etc/ftpd ftpd -a
telnet stream tcp nowait NOLUID /etc/telnetd telnetd
shell stream tcp nowait NOLUID /etc/rshd rshd
login stream tcp nowait NOLUID /etc/rlogind rlogind
exec stream tcp nowait NOLUID /etc/rexecd rexecd
finger stream tcp nowait nouser /etc/fingerd fingerd
#uucp stream tcp nowait NOLUID /usr/lib/uucp/uucpd uucpd
# Enabling this allows public read files to be accessed via TFTP.
#tftp dgram udp wait nouser /etc/tftpd tftpd
# This is the more secure method, since only files from /tftpboot can
# be accessed via TFTP. This must be root in order to do the chroot
# to /tftpboot. /tftpboot must be created by hand.
#tftp dgram udp wait root /etc/tftpd tftpd -s /tftpboot
comsat dgram udp wait root /etc/comsat comsat
ntalk dgram udp wait nouser /etc/talkd talkd
#
# Entries for BOOTP and DHCP servers & relay agent
#
# If running tftpd in secure mode, use bootpd with "-c securedir"
# where securedir is the argument to tftpd -s.
#
# To run bootpd by itself, use:
#bootps dgram udp wait root /etc/bootpd bootpd
#
# To run dhcpd by itself, use:
#bootps dgram/i udp wait root /etc/dhcpd dhcpd
#
# When running dhcpd and bootpd, bootpd must be run in "slave mode" (with the
# -S option). In this mode, bootpd listens on an alternate port. The port
# bootps-alt is defined to be 950 in /etc/services, but it can be anything
# < 1024. To run dhcpd and bootpd, use the following two lines:
#bootps dgram/i udp wait root /etc/dhcpd dhcpd -b bootps-alt
#bootps-alt dgram udp wait root /etc/bootpd bootpd -S
#
# To run the BOOTP/DHCP relay agent bootpgw, use:
#bootps dgram/i udp wait root /etc/bootpgw bootpgw server-name
tcpmux stream tcp nowait root internal
echo stream tcp nowait root internal
discard stream tcp nowait root internal
chargen stream tcp nowait root internal
daytime stream tcp nowait root internal
time stream tcp nowait root internal
echo dgram udp wait root internal
discard dgram udp wait root internal
chargen dgram udp wait root internal
daytime dgram udp wait root internal
time dgram udp wait root internal
pop3 stream tcp nowait root /etc/popper popper
imap stream tcp nowait root /etc/imapd imapd
I'm using SCO unix - 5 as server and stallion board to connect my users on serial comm.
I want some of my files generetd on unix to be copied to one of my window'95 based system.
I can use crosstalk loaded on windows system to log in automatically and 'cat the file' which will be than stored... (1 Reply)
How to config my Sco openserver 5.06 to
link on the Internet.MY Etherent sever is Winme...........
Can u tell me from the configure of netcard start.........
thanx for help...............thanx a lot (1 Reply)
Is it possible to ftp from WinXp to a Linux box? I have the the ftp server set up to take the request from the WinXp box but each time I try to connect I keep getting an error, Connection established, unknown error(windows ftp program) or if I try to ftp from the DOS prompt I get ftp connect:... (3 Replies)
First off I did try google for help on this topic, didn't really find anything.
When I try to ftp from my SCO Unix box (SCO_SV servername 3.2 5.0.5 i386) to a proFTPD server within my company I get this error
Connected to 10.?.?.?.
220 ProFTPD Server ftp.hostname.com
Name (10.?.?.?:root):... (1 Reply)
My goal is to use FTP to transfer file between PC and SCO Unix server.When I try to connect via FTP with root user, it failed.
What should I do? How to configure ftpaccess?
Thanks in advance! (2 Replies)
I am trying to start an FTP session from my UNIX PC to a PC running XP.
I aim to run a cron to manipulate remote files on the Windows M/C.
I cannot connect to the Windows M/C when i start rthe FTP session on the UNIX box. I can do it fine the other way round.
I have set entries in /etc/hosts... (2 Replies)
my problem is like this
while ftping locally it works,
but when users from WAN try the ftp services it doesnt comes
the message it displays is as follows "connection closed by remote host "
please help
Thanks (5 Replies)
Hi,
I am using the following syntax to connect to an FTP server and paste the file.
Based on the value in the variable $Folder, i want to connect to different folders on the same server. The credential is different to access different folders. How to get the user name and password from a... (3 Replies)
I'm using proftpd to manage my ftp/sftp connections but would like to use RBAC to only allow ftp/sftp connections. Has anyone done this or can point me in the right direction? This is my first experience trying to use RBAC. Thanks in advance. (2 Replies)
Hello,
I'm a UNIX SysAdmin at a large webhosting company and we have a vendor that provides a service which involves the ftp'ing of files from their servers to ours. They initiate FTP using a perl script with NET::FTP.
When they try to transfer files (and delete files over ftp), there is... (3 Replies)
Discussion started by: tmmgeekette
3 Replies
LEARN ABOUT DEBIAN
gprostats
GPROSTATS(8) proftpd statistics generator tool GPROSTATS(8)NAME
gprostats - statistics generator tool for proftpd
SYNOPSIS
gprostats [-c FILE] [-html PATH] [-w FILE] [-x FILE]
gprostats [-help]
DESCRIPTION
gprostats is a staticics generator tool for proftpd. It takes all users in proftpd.conf and if one if those users exists in the xferlog
those ul/dl stats gets added to that user.
The statistics are sorted by top 10 ul and dl. It can generate html output and welcome messages for all users that are currently listed in
proftpd.conf.
OPTIONS -c FILE
Specifies alternative location of the proftpd configuration file. Default is /etc/proftpd/proftpd.conf.
-help
Shows help.
-html PATH
Make a html ftp statistics page in the specified location, e.g. /var/www/html/ftp.htm.
-w FILE
Make welcome messages for all ftpusers with this name. Default is welcome.msg.
-x FILE
Specifies alternative location of the proftpd log file. Default is /usr/var/log/xferlog.
If neither of the -w or -html flags are used it will just print the results to the screen. Only uploads and downloads above 1023 Bytes are
counted.
HOMEPAGE
More information about gadmin-proftpd and the gadmintools project can be found at <http://www.gadmintools.org/>.
AUTHOR
gadmin-proftpd was written by Magnus Loef <magnus-swe@telia.com>.
This manual page was written by Daniel Baumann <daniel@debian.org>, for the Debian project (but may be used by others).
0.3.9 2010-03-14 GPROSTATS(8)