somebody can help me to fix this? I'm restoring the wpar from wpar mksysb not a mksysb from principal Lpar.
It is not clear if the error comes from the host LPAR or the workload partition and you will have to investigate this first. It might be that the WPAR mksysb is faulty and missing something vital. Depending on what it is you might be able to circumvent it (i.e. by using normal network login as Neo suggested) or not. You also can try to put some missing file into the WPARs filesystem (which is accessible from the hosting LPAR) but for this you will need to know what it is that is missing.
If the error comes from the LPARs side perhaps something for the clogin command to work is missing and you need to correct this on your LPAR.
In other words: there are a lot of things that could be responsible for this error and we have simply not enough information. Care to describe your environment and the error in some greater detail?
Hi,
I have a shared AIX wpar configured.
I have started snmpd process on shared AIX wpar.
But when i tried to query a MIB id using the following command
/opt/OV/bin/snmpget -d -v 1 -c public -p <hostname> .1.3.6.1.2.1.1.7.0
i get the following error message
#... (0 Replies)
im kinda new to shell scripting so i need some help
i try to run this script and get the error code
> 5 ")syntax error: operand expected (error token is "
the code for the script is
#!/bin/sh
#
# script to see if the given value is correct
#
# Define errors
ER_AF=86 # Var is... (4 Replies)
Hello,
We have a system running AIX 6.1.7.1. We have created a Workload Partition(wpar) on this system with wpar specific routing enabled.
On wpar, we are running DNS (UDP/53) and syslog (UDP/514).
en0: 1.1.1.1/255.255.255.0 NOT assigned to any wpar
en1:... (0 Replies)
seems to be WPAR is quite easy to set up..without additional licenses..
If I don't need Linux and all my legacy and new apps are happy in AIX 7.1 (the latest OS), I could save all troubles and use WPAR.
Can someone comment on this ??
One copy of OS to maintain, so to speak..
... (4 Replies)
Hi All,
This is for WPAR monitoring shell script, earlier opened thread was closed, had to open a new thread, as suggested I have used script as below, But am trying to get the output in below format, need suggestions with it. Below is the lswpar output, required output format.
... (7 Replies)
Hi.
I've setup a wpar on aix
mkwpar -h ibmunix2 -i -r -N interface=en0 address=10.6.0.1 netmask=255.255.255.0 -n ibmunix2
When i log into ibmunix2 it can't ping any external host,include the ibm host.
How to set route for network please?
I've set ibmunix2 with a different subnet.
... (7 Replies)
Anyone running CICS TX in a WPAR ?
In my attempts to run CICS TX 5.1.0.1 in a WPAR..... CICS fails to start due to unable to load a CICS IPC Kernel Extension. The Kernel Extension is 64 bit (so not a 32 vs 64 bit issue).
Base system/LPAR is Power8 and AIX 7.1 TL3 SP5. WPAR is versioned... (4 Replies)
AIX 7.1
New to WPAR, hopefully just missing something simple here.
Creating the WPAR like this.....
(The box where the WPAR is hosted does have an iscsi protocol device)
mkwpar -h wpar08 -l -n wpar08 -N interface=en0 address=xxx.xx.xx.xxx netmask=255.255.255.0 -D devname=/dev/iscsi0 -D... (0 Replies)
Discussion started by: TomR
0 Replies
LEARN ABOUT DEBIAN
rancid_intro
rancid_intro(1) General Commands Manual rancid_intro(1)NAME
rancid_intro - introduction to the Really Awesome New Cisco confIg Differ
INTRODUCTION
rancid is really more than just a Cisco configuration differ. It handles several different device's configurations; currently including
Alteon, Arista, Bay Networks (Nortel), Cisco, Extreme, F5 BigIP, Force10, Fortinet, Foundry, HP Procurve switches, Hitachi, Juniper Routers
and edge (ERX) routers, Lucent TNT, MRTd daemon, Netscalar load balancers, Netscreen firewalls, Procket, Redback, SMC switches, Zebra
routing software, and the ADC-Kentrox EZ-T3 mux.
rancid uses an expect script to login to each of a list of devices and run a set of commands for that device-type and collects the output.
The output is run through some filtering to summarize, reformat, and/or snip unwanted or security related data such as chassis temperature
and easily reverse-able passwords.
Named after the device's name in the group's configuration file (router.db), the resulting files are saved in the directory
<group>/configs. Except for the data filtered from the configuration file for security reasons, such as reversable passwords, these files
are suitable for loading directly to restore a lost configuration. See rancid.conf(5) for more information on <group>s.
After filtering, a uni-diff (see diff(1)) of the result is produced for each of the devices in a group against that of the previous run of
rancid and is e-mailed to that group's mail list, "rancid-<group>". This e-mail will also include any differences of the device list in
the group's configuration file, router.db.
Lastly, all the updated files are checked into the revision control system (CVS or Subversion).
Additional utilities, including a looking glass, come with rancid. See rancid's share directory ( share/rancid).
EXAMPLE E-MAIL
Below is a sample of a uni-diff produced from the group "shrubbery" for the device named dfw.shrubbery.net, which happens to be a Cisco
GSR.
From: rancid
To: rancid-shrubbery@shrubbery.net
Subject: shrubbery router config diffs
Precedence: bulk
Index: configs/dfw.shrubbery.net
===================================================================
retrieving revision 1.144
diff -u -4 -r1.144 dfw.shrubbery.net
@@ -57,14 +57,8 @@
!Slot 2/MBUS: hvers 1.1
!Slot 2/MBUS: software 01.36 (RAM) (ROM version is 01.33)
!Slot 2/MBUS: 128 Mbytes DRAM, 16384 Kbytes SDRAM
!
- !Slot 6: 1 Port Gigabit Ethernet
- !Slot 6/PCA: part 73-3302-03 rev C0 ver 3, serial CAB031216OL
- !Slot 6/PCA: hvers 1.1
- !Slot 6/MBUS: part 73-2146-07 rev B0 dev 0, serial CAB031112SB
- !Slot 6/MBUS: hvers 1.2
- !Slot 6/MBUS: software 01.36 (RAM) (ROM version is 01.33)
!Slot 7: Route Processor
!Slot 7/PCA: part 73-2170-03 rev B0 ver 3, serial CAB024901SI
!Slot 7/PCA: hvers 1.4
!Slot 7/MBUS: part 73-2146-06 rev A0 dev 0, serial CAB02060044
In this example, we see that a Gigabit Ethernet linecard was removed from slot 6. However, since this data is collected from "show"
commands on the router, it could just as easily be that the card crashed so the RP can not communicate with it to collect information.
GETTING STARTED
Installation instructions are included in the distribution's top-level directory in the README file (which will be installed in
share/rancid). Once the installation is complete, start by reading the man pages listed below or follow the basic instructions included in
the README file.
See http://www.shrubbery.net/rancid for information on new versions, mail lists, etc.
ADDING NEW GROUPS
Follow this procedure for adding new groups:
o Update the LIST_OF_GROUPS variable in etc/rancid.conf (see rancid.conf(5)).
o Run rancid-cvs(1).
o Update the system's mail aliases file /etc/aliases (see rancid.conf(5)).
SEE ALSO clogin(1), cloginrc(5), control_rancid(1), lg_intro(1), rancid(1), rancid-run(1), rancid.conf(5), router.db(5)
14 july 2009 rancid_intro(1)