After upgrading to solaris 10 (from sol 8) on a SUN Blade 1500, it seems that the dvd/cd-rom does not accept dvds nor cds in the dvd drive.
After I insert a dvd/cd in the drive, the disk is simply ejected (!)
Is it possible that the upgrade made the system not being able to recognize these... (2 Replies)
I would like to check for the existance of media in a DVD drive prior to running a mkcd. Is this possible? I have accomplished this in the past with tctl, but that was with a tape drive. Any help is appreciated.
Thanks (0 Replies)
Hi there
In our Data centre we have a mixture of SPARCS running from v100 and ultra10's to v800 and v1250 boxes we also have a large amount of x86 X2100 and X4100 boxes
I am looking to purchase an external DVD-ROM drive that we can plug into the back of any of the boxes if we need to (I... (2 Replies)
Hello,
It's some tool in AIX to check what kind of media (DVD+RW DVD-RW DVD-RAM) is inserted in drive?
In linux there is very nice tool called dvd+rw-mediainfo. (0 Replies)
I was having problems with the DVD-ROM drive not being recognized. I thought it was a configuration issue, but it appears to be a hardware problem. Now the system hangs at boot. This last time I tried it, it said:
At which point, it hangs. (1 Reply)
Currently have an issue were we use a script to load a security .dat key. The script was failing to load stating "Unable to open directory". I ssh'd into the server and performed an ls -la on the /cdrom directory. I show the usual cdrom0 but the directory on the cd should be key but is showing... (0 Replies)
I'm a technician who has been called upon to troubleshoot an ancient HP9000 K260, running HP UX 11.11.
After a power sag/crash/restart FSCK gave multiple error/warning messages about logical volumes and groups. I have some modest experience with Unix servers, but not on such an old and... (2 Replies)
Hi Guys,
I think i probably know the answer to this question, but ill put it out there.
I have access to one, and only one SunFire v240 with no DVD drive. I have been tasked with installing Solaris 10 on there (Solaris 8 is on at the moment).
The obvious thing was to try a USB DVD... (4 Replies)
· Next, you will need to install the software package that provides DHCP services (a.k.a. the DHCP daemon software). It is located on the installation DVD ISO image for the CentOS Linux Distribution. Associate the (Disc 1 of 2) DVD ISO with the virtual machine's CD/DVD optical drive, create a... (1 Reply)
Discussion started by: beerpong1
1 Replies
LEARN ABOUT NETBSD
mlxctl
MLXCTL(8) BSD System Manager's Manual MLXCTL(8)NAME
mlxctl -- Mylex DAC960 family management utility
SYNOPSIS
mlxctl [-f dev] [-v] [-a] status [drive] [...]
mlxctl [-f dev] [-a] detach [drive] [...]
mlxctl [-f dev] [-a] check [drive] [...]
mlxctl [-f dev] rebuild channel:target
mlxctl [-f dev] cstatus
mlxctl [-f dev] rescan
mlxctl [-f dev] config
DESCRIPTION
The mlxctl utility performs status monitoring and management functions for Mylex DAC960 RAID controllers and attached devices.
The following options are available:
-a Apply the action to all drives attached to the controller.
-f dev Specify the control device to use. The default is /dev/mlx0.
-v Increased verbosity.
The following commands are available:
cstatus Display the controller's current status.
status Display the status of the specified drives. This command returns 0 if all drives tested are online, 1 if one or more drives are
critical and 2 if one or more are offline.
rescan Re-scan the logical drive table, and attach or detach devices from the system as necessary.
detach Detach the specified drives. Drives must be unmounted and unopened for this command to succeed.
check Initiate a consistency check and repair pass on a drive that provides redundancy (e.g., RAID1 or RAID5). This command returns imme-
diately. The status command can be used to monitor the progress of the check.
rebuild Rebuild onto the specified physical drive. Note that there can be only one running rebuild operation per controller at any given
time. This command returns immediately. The cstatus command can be used to monitor the progress of the rebuild.
config Write the current system drive configuration to stdout.
EXAMPLES
Display the status of drive ld3 attached to the controller mlx1:
mlxctl -f /dev/mlx1 -v status ld3
SEE ALSO ld(4), mlx(4)HISTORY
The mlxctl command first appeared in NetBSD 1.5.3, and was based on the mlxcontrol utility found in FreeBSD.
BUGS
Modifying drive configuration is not yet supported.
Some commands do not work with older firmware revisions.
Error log extraction is not yet supported.
BSD April 10, 2000 BSD