I have a shell script and want to assign a value to a variable. The value is the line exctrated from a file using the line number. The line number it is not fix, and could change any time.
I have tried sed, awk, head .. See my script
# Get randome line number from the file
#selectedline = `awk... (1 Reply)
Hello,
I am having trouble extracting a specific line from a file when the line number is known. My first attempt involved grep -n 'hi' (the word 'hi will always be there) to get the line number before the line that I actually want (line 4).
Extra Notes:
-I am working in a bash script.
-The... (7 Replies)
This is the line that I am using:
sed 's/^*\({3}*$\)/\1 /' <test.txt >results.txt
and suppose that test.txt contains the following lines:
http://www.example.com/200904/AUS.txt
http://www.example.com/200903/_RUS.txt
http://www.example.com/200902/.FRA.txt
What I expected to see in results.txt... (6 Replies)
FOLKS ,
i have a text file that is generated automatically of an another korn shell script, i want to bring in the fifth line of the text file in to my korn shell script and look for a particular word in the line . Can you all share some thoughts on this one.
thanks...
Venu (3 Replies)
Dear all,
I am trying to extract a number from a line in one file (task 1), duplicate another file (task 2) and replace all instances of the strings 300, in duplicated with the extracted number (task 3). Here is what I have tried so far:
for ((k=1;k<4;k++)); do
temp=`sed -n "${k}p"... (2 Replies)
I have a LOG file which looks like this
Import started at: Mon Jul 23 02:13:01 EDT 2012
Initialization completed in 2.146 seconds.
--------------------------------------------------------------------------------
--
Import summary for Import item: PolicyInformation... (8 Replies)
Hi guys,
I have been trying to do this, but... no luck so maybe you can help me.
I have a line like this:
Total Handled, Received, on queue Input Mgs: 140 / 14 => 0
I need to, get the number after the / until the =, to get only 14 .
Any help is greatly appreciated.
Thanks, (4 Replies)
In the below perl code I am using tags within each line to extract certain information. The tags that are used are:
STB >0.8 is STRAND BIAS otherwise GOOD
FDP is the second number
GO towards the end of the line is read into an array and the value returned is outputed, in the first line that... (1 Reply)
Discussion started by: cmccabe
1 Replies
LEARN ABOUT FREEBSD
gre
GRE(4) BSD Kernel Interfaces Manual GRE(4)NAME
gre -- encapsulating network device
SYNOPSIS
To compile the driver into the kernel, place the following line in the kernel configuration file:
device gre
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
if_gre_load="YES"
DESCRIPTION
The gre network interface pseudo device encapsulates datagrams into IP. These encapsulated datagrams are routed to a destination host, where
they are decapsulated and further routed to their final destination. The ``tunnel'' appears to the inner datagrams as one hop.
gre interfaces are dynamically created and destroyed with the ifconfig(8) create and destroy subcommands.
This driver corresponds to RFC 2784. Encapsulated datagrams are prepended an outer datagram and a GRE header. The GRE header specifies the
type of the encapsulated datagram and thus allows for tunneling other protocols than IP. GRE mode is also the default tunnel mode on Cisco
routers. gre also supports Cisco WCCP protocol, both version 1 and version 2.
The gre interfaces support a number of additional parameters to the ifconfig(8):
grekey Set the GRE key used for outgoing packets. A value of 0 disables the key option.
enable_csum Enables checksum calculation for outgoing packets.
enable_seq Enables use of sequence number field in the GRE header for outgoing packets.
EXAMPLES
192.168.1.* --- Router A -------tunnel-------- Router B --- 192.168.2.*
/
/
+------ the Internet ------+
Assuming router A has the (external) IP address A and the internal address 192.168.1.1, while router B has external address B and internal
address 192.168.2.1, the following commands will configure the tunnel:
On router A:
ifconfig greN create
ifconfig greN inet 192.168.1.1 192.168.2.1
ifconfig greN inet tunnel A B
route add -net 192.168.2 -netmask 255.255.255.0 192.168.2.1
On router B:
ifconfig greN create
ifconfig greN inet 192.168.2.1 192.168.1.1
ifconfig greN inet tunnel B A
route add -net 192.168.1 -netmask 255.255.255.0 192.168.1.1
NOTES
The MTU of gre interfaces is set to 1476 by default, to match the value used by Cisco routers. This may not be an optimal value, depending
on the link between the two tunnel endpoints. It can be adjusted via ifconfig(8).
For correct operation, the gre device needs a route to the decapsulating host that does not run over the tunnel, as this would be a loop.
The kernel must be set to forward datagrams by setting the net.inet.ip.forwarding sysctl(8) variable to non-zero.
SEE ALSO gif(4), inet(4), ip(4), me(4), netintro(4), protocols(5), ifconfig(8), sysctl(8)
A description of GRE encapsulation can be found in RFC 2784 and RFC 2890.
AUTHORS
Andrey V. Elsukov <ae@FreeBSD.org>
Heiko W.Rupp <hwr@pilhuhn.de>
BUGS
The current implementation uses the key only for outgoing packets. Incoming packets with a different key or without a key will be treated as
if they would belong to this interface.
The sequence number field also used only for outgoing packets.
BSD November 7, 2014 BSD