virtd_selinux(8)					       SELinux Policy virtd						  virtd_selinux(8)

NAME

       virtd_selinux - Security Enhanced Linux Policy for the virtd processes

DESCRIPTION

       Security-Enhanced Linux secures the virtd processes via flexible mandatory access control.

       The  virtd  processes  execute with the virtd_t SELinux type. You can check if you have these processes running by executing the ps command
       with the -Z qualifier.

       For example:

       ps -eZ | grep virtd_t

ENTRYPOINTS

       The virtd_t SELinux  type  can  be  entered  via  the  unlabeled_t,  proc_type,	file_type,  mtrr_device_t,  filesystem_type,  sysctl_type,
       virtd_exec_t file types.

       The default entrypoint paths for the virtd_t domain are the following:

       all  files on the system, /dev/cpu/mtrr, /usr/sbin/libvirtd, /usr/bin/imgfac.py, /usr/sbin/virtlockd, /usr/bin/imagefactory, /usr/bin/nova-
       compute, /usr/sbin/condor_vm-gahp, /usr/bin/vios-proxy-host, /usr/bin/vios-proxy-guest

PROCESS TYPES

       SELinux defines process types (domains) for each process running on the system

       You can see the context of a process using the -Z option to ps

       Policy governs the access confined processes have to files.  SELinux virtd policy is very flexible allowing users to setup their virtd pro-
       cesses in as secure a method as possible.

       The following process types are defined for virtd:

       virt_qemu_ga_unconfined_t, virtd_lxc_t, virt_qmf_t, virt_qemu_ga_t, virt_bridgehelper_t, virtd_t

       Note:  semanage	permissive  -a virtd_t can be used to make the process type virtd_t permissive. SELinux does not deny access to permissive
       process types, but the AVC (SELinux denials) messages are still generated.

BOOLEANS

       SELinux policy is customizable based on least access required.  virtd policy is extremely flexible and has several booleans that allow  you
       to manipulate the policy and run virtd with the tightest access possible.

       If you want to allow virtual processes to run as userdomains, you must turn on the virt_transition_userdomain boolean. Disabled by default.

       setsebool -P virt_transition_userdomain 1

       If you want to allow confined virtual guests to manage nfs files, you must turn on the virt_use_nfs boolean. Disabled by default.

       setsebool -P virt_use_nfs 1

       If you want to allow confined virtual guests to manage cifs files, you must turn on the virt_use_samba boolean. Disabled by default.

       setsebool -P virt_use_samba 1

       If  you want to allow users to resolve user passwd entries directly from ldap rather then using a sssd server, you must turn on the authlo-
       gin_nsswitch_use_ldap boolean. Disabled by default.

       setsebool -P authlogin_nsswitch_use_ldap 1

       If you want to allow all daemons to write corefiles to /, you must turn on the daemons_dump_core boolean. Disabled by default.

       setsebool -P daemons_dump_core 1

       If you want to enable cluster mode for daemons, you must turn on the daemons_enable_cluster_mode boolean. Enabled by default.

       setsebool -P daemons_enable_cluster_mode 1

       If you want to allow all daemons to use tcp wrappers, you must turn on the daemons_use_tcp_wrapper boolean. Disabled by default.

       setsebool -P daemons_use_tcp_wrapper 1

       If you want to allow all daemons the ability to read/write terminals, you must turn on the daemons_use_tty boolean. Disabled by default.

       setsebool -P daemons_use_tty 1

       If you want to deny user domains applications to map a memory region as both executable and writable, this is dangerous and the	executable
       should be reported in bugzilla, you must turn on the deny_execmem boolean. Enabled by default.

       setsebool -P deny_execmem 1

       If  you	want  to  deny	any  process  from ptracing or debugging any other processes, you must turn on the deny_ptrace boolean. Enabled by
       default.

       setsebool -P deny_ptrace 1

       If you want to deny any process from ptracing or debugging any other processes, you must  turn  on  the	deny_ptrace  boolean.  Enabled	by
       default.

       setsebool -P deny_ptrace 1

       If  you	want  to  deny	any  process  from ptracing or debugging any other processes, you must turn on the deny_ptrace boolean. Enabled by
       default.

       setsebool -P deny_ptrace 1

       If you want to allow all domains to use other domains file descriptors, you must turn on the domain_fd_use boolean. Enabled by default.

       setsebool -P domain_fd_use 1

       If you want to allow all domains to use other domains file descriptors, you must turn on the domain_fd_use boolean. Enabled by default.

       setsebool -P domain_fd_use 1

       If you want to allow all domains to use other domains file descriptors, you must turn on the domain_fd_use boolean. Enabled by default.

       setsebool -P domain_fd_use 1

       If you want to allow all domains to have the kernel load modules, you must turn on  the	domain_kernel_load_modules  boolean.  Disabled	by
       default.

       setsebool -P domain_kernel_load_modules 1

       If  you	want  to  allow  all domains to have the kernel load modules, you must turn on the domain_kernel_load_modules boolean. Disabled by
       default.

       setsebool -P domain_kernel_load_modules 1

       If you want to allow all domains to have the kernel load modules, you must turn on  the	domain_kernel_load_modules  boolean.  Disabled	by
       default.

       setsebool -P domain_kernel_load_modules 1

       If you want to allow all domains to execute in fips_mode, you must turn on the fips_mode boolean. Enabled by default.

       setsebool -P fips_mode 1

       If you want to allow all domains to execute in fips_mode, you must turn on the fips_mode boolean. Enabled by default.

       setsebool -P fips_mode 1

       If you want to allow all domains to execute in fips_mode, you must turn on the fips_mode boolean. Enabled by default.

       setsebool -P fips_mode 1

       If you want to enable reading of urandom for all domains, you must turn on the global_ssp boolean. Disabled by default.

       setsebool -P global_ssp 1

       If you want to enable reading of urandom for all domains, you must turn on the global_ssp boolean. Disabled by default.

       setsebool -P global_ssp 1

       If you want to enable reading of urandom for all domains, you must turn on the global_ssp boolean. Disabled by default.

       setsebool -P global_ssp 1

       If you want to allow confined applications to run with kerberos, you must turn on the kerberos_enabled boolean. Enabled by default.

       setsebool -P kerberos_enabled 1

       If  you want to control the ability to mmap a low area of the address space, as configured by /proc/sys/kernel/mmap_min_addr, you must turn
       on the mmap_low_allowed boolean. Disabled by default.

       setsebool -P mmap_low_allowed 1

       If you want to allow system to run with NIS, you must turn on the nis_enabled boolean. Disabled by default.

       setsebool -P nis_enabled 1

       If you want to allow confined applications to use nscd shared memory, you must turn on the nscd_use_shm boolean. Enabled by default.

       setsebool -P nscd_use_shm 1

       If you want to disable kernel module loading, you must turn on the secure_mode_insmod boolean. Enabled by default.

       setsebool -P secure_mode_insmod 1

       If you want to boolean to determine whether the system permits loading policy, setting enforcing mode, and changing  boolean  values.   Set
       this to true and you have to reboot to set it back, you must turn on the secure_mode_policyload boolean. Enabled by default.

       setsebool -P secure_mode_policyload 1

       If  you	want  to allow unconfined executables to make their heap memory executable.  Doing this is a really bad idea. Probably indicates a
       badly coded executable, but could indicate an attack. This executable should  be  reported  in  bugzilla,  you  must  turn  on  the  selin-
       uxuser_execheap boolean. Disabled by default.

       setsebool -P selinuxuser_execheap 1

       If  you	want to allow all unconfined executables to use libraries requiring text relocation that are not labeled textrel_shlib_t, you must
       turn on the selinuxuser_execmod boolean. Enabled by default.

       setsebool -P selinuxuser_execmod 1

       If you want to allow unconfined executables to make their stack executable.  This should never, ever be	necessary.  Probably  indicates  a
       badly  coded  executable,  but  could  indicate	an  attack.  This  executable  should be reported in bugzilla, you must turn on the selin-
       uxuser_execstack boolean. Enabled by default.

       setsebool -P selinuxuser_execstack 1

       If you want to allow confined virtual guests to use serial/parallel communication ports, you must turn on the virt_use_comm  boolean.  Dis-
       abled by default.

       setsebool -P virt_use_comm 1

       If  you	want to allow confined virtual guests to use serial/parallel communication ports, you must turn on the virt_use_comm boolean. Dis-
       abled by default.

       setsebool -P virt_use_comm 1

       If you want to allow confined virtual guests to use executable memory and executable stack, you must turn on the virt_use_execmem  boolean.
       Disabled by default.

       setsebool -P virt_use_execmem 1

       If  you want to allow confined virtual guests to use executable memory and executable stack, you must turn on the virt_use_execmem boolean.
       Disabled by default.

       setsebool -P virt_use_execmem 1

       If you want to allow confined virtual guests to read fuse files, you must turn on the virt_use_fusefs boolean. Disabled by default.

       setsebool -P virt_use_fusefs 1

       If you want to allow confined virtual guests to read fuse files, you must turn on the virt_use_fusefs boolean. Disabled by default.

       setsebool -P virt_use_fusefs 1

       If you want to allow confined virtual guests to manage nfs files, you must turn on the virt_use_nfs boolean. Disabled by default.

       setsebool -P virt_use_nfs 1

       If you want to allow confined virtual guests to manage nfs files, you must turn on the virt_use_nfs boolean. Disabled by default.

       setsebool -P virt_use_nfs 1

       If you want to allow confined virtual guests to interact with rawip sockets, you must turn  on  the  virt_use_rawip  boolean.  Disabled	by
       default.

       setsebool -P virt_use_rawip 1

       If  you	want  to  allow  confined  virtual guests to interact with rawip sockets, you must turn on the virt_use_rawip boolean. Disabled by
       default.

       setsebool -P virt_use_rawip 1

       If you want to allow confined virtual guests to manage cifs files, you must turn on the virt_use_samba boolean. Disabled by default.

       setsebool -P virt_use_samba 1

       If you want to allow confined virtual guests to manage cifs files, you must turn on the virt_use_samba boolean. Disabled by default.

       setsebool -P virt_use_samba 1

       If you want to allow confined virtual guests to interact with the sanlock, you must turn  on  the  virt_use_sanlock  boolean.  Disabled	by
       default.

       setsebool -P virt_use_sanlock 1

       If  you	want  to  allow  confined  virtual guests to interact with the sanlock, you must turn on the virt_use_sanlock boolean. Disabled by
       default.

       setsebool -P virt_use_sanlock 1

       If you want to allow confined virtual guests to use usb devices, you must turn on the virt_use_usb boolean. Enabled by default.

       setsebool -P virt_use_usb 1

       If you want to allow confined virtual guests to use usb devices, you must turn on the virt_use_usb boolean. Enabled by default.

       setsebool -P virt_use_usb 1

       If you want to allow confined virtual guests to interact with the xserver, you must turn  on  the  virt_use_xserver  boolean.  Disabled	by
       default.

       setsebool -P virt_use_xserver 1

       If  you	want  to  allow  confined  virtual guests to interact with the xserver, you must turn on the virt_use_xserver boolean. Disabled by
       default.

       setsebool -P virt_use_xserver 1

       If you want to support X userspace object manager, you must turn on the xserver_object_manager boolean. Enabled by default.

       setsebool -P xserver_object_manager 1

       If you want to allow ZoneMinder to run su/sudo, you must turn on the zoneminder_run_sudo boolean. Disabled by default.

       setsebool -P zoneminder_run_sudo 1

NSSWITCH DOMAIN

       If you want to allow users to resolve user passwd entries directly from ldap rather then using a sssd server for the virtd_t,  virtd_lxc_t,
       you must turn on the authlogin_nsswitch_use_ldap boolean.

       setsebool -P authlogin_nsswitch_use_ldap 1

       If  you	want to allow confined applications to run with kerberos for the virtd_t, virtd_lxc_t, you must turn on the kerberos_enabled bool-
       ean.

       setsebool -P kerberos_enabled 1

PORT TYPES

       SELinux defines port types to represent TCP and UDP ports.

       You can see the types associated with a port by using the following command:

       semanage port -l

       Policy governs the access confined processes have to these ports.  SELinux virtd policy is very flexible  allowing  users  to  setup  their
       virtd processes in as secure a method as possible.

       The following port types are defined for virtd:

       virt_migration_port_t

       Default Defined Ports:
		 tcp 49152-49216

       virt_port_t

       Default Defined Ports:
		 tcp 16509,16514
		 udp 16509,16514

MANAGED FILES

       The  SELinux process type virtd_t can manage files labeled with the following file types.  The paths listed are the default paths for these
       file types.  Note the processes UID still need to have DAC permissions.

       file_type

	    all files on the system

FILE CONTEXTS

       SELinux requires files to have an extended attribute to define the file type.

       You can see the context of a file using the -Z option to ls

       Policy governs the access confined processes have to these files.  SELinux virtd policy is very flexible  allowing  users  to  setup  their
       virtd processes in as secure a method as possible.

       STANDARD FILE CONTEXT

       SELinux defines the file context types for the virtd, if you wanted to store files with these types in a diffent paths, you need to execute
       the semanage command to sepecify alternate labeling and then use restorecon to put the labels on disk.

       semanage fcontext -a -t virtd_exec_t '/srv/virtd/content(/.*)?'
       restorecon -R -v /srv/myvirtd_content

       Note: SELinux often uses regular expressions to specify labels that match multiple files.

       The following file types are defined for virtd:

       virtd_exec_t

       - Set files with the virtd_exec_t type, if you want to transition an executable to the virtd_t domain.

       Paths:
	    /usr/sbin/libvirtd, /usr/bin/imgfac.py, /usr/sbin/virtlockd, /usr/bin/imagefactory,  /usr/bin/nova-compute,  /usr/sbin/condor_vm-gahp,
	    /usr/bin/vios-proxy-host, /usr/bin/vios-proxy-guest

       virtd_initrc_exec_t

       - Set files with the virtd_initrc_exec_t type, if you want to transition an executable to the virtd_initrc_t domain.

       virtd_keytab_t

       - Set files with the virtd_keytab_t type, if you want to treat the files as kerberos keytab files.

       virtd_lxc_exec_t

       - Set files with the virtd_lxc_exec_t type, if you want to transition an executable to the virtd_lxc_t domain.

       virtd_unit_file_t

       - Set files with the virtd_unit_file_t type, if you want to treat the files as virtd unit content.

       Paths:
	    /usr/lib/systemd/system/.*xen.*.service, /usr/lib/systemd/system/virt.*.service, /usr/lib/systemd/system/libvirt.*.service

       Note:  File context can be temporarily modified with the chcon command.	If you want to permanently change the file context you need to use
       the semanage fcontext command.  This will modify the SELinux labeling database.	You will need to use restorecon to apply the labels.

COMMANDS

       semanage fcontext can also be used to manipulate default file context mappings.

       semanage permissive can also be used to manipulate whether or not a process type is permissive.

       semanage module can also be used to enable/disable/install/remove policy modules.

       semanage port can also be used to manipulate the port definitions

       semanage boolean can also be used to manipulate the booleans

       system-config-selinux is a GUI tool available to customize SELinux policy settings.

AUTHOR

       This manual page was auto-generated using sepolicy manpage .

SEE ALSO

       selinux(8),   virtd(8),	 semanage(8),	 restorecon(8),    chcon(1),	sepolicy(8)    ,    setsebool(8),    virt_bridgehelper_selinux(8),
       virt_qemu_ga_selinux(8), virt_qemu_ga_unconfined_selinux(8), virt_qmf_selinux(8), virtd_lxc_selinux(8)

virtd								     14-06-10							  virtd_selinux(8)