Then add the device to the LDOM as follows;
Once the device is visible in the LDOM, use the good old format and mkfs or newfs commands as you would in a standalone machine. You'll have to be in the LDOM as the root user.
I need to create a simple shell script to check filesystems space in a file system called "/arch_nb" then based on the percentage use either run another script or exit.
I was thinking of something simple along the lines of:
df -k | then some action to pipe for percentage used
...place... (10 Replies)
Hi everybody,
Is it possible to create a Shared Filesystem on Network to be accessed from 2 Systems?
Both systems are AIX but with different versions. One of these systems is AIX 4.3 & the other is AIX 5.2.
Thanks in advanced (8 Replies)
Hello - I am finding difficulty in creating and allocating correct size to File Systems on solarix x86 box. Please see below contents I followed on screen and in the end It shows that /app file system is created of size 135GB , I wanted it to be 30gb as mentioned during 'format' command in 'Enter... (7 Replies)
Hi all,
I would like to ask on how to create 2MB partition on a Compact Flash card. It supposed to be of FAT12 type, and the CF capacity is 4GB. I try to do the partitioning and specify the size as 2MB but the partition editor automatically resize it to 8MB. I know that this is possible and the... (4 Replies)
I'm new to linux and need information on how do I create a filesytem on a dedicated on LUN for RHEL 4 and 5? I want the filesystem to be a ext3
---------- Post updated at 10:00 AM ---------- Previous update was at 08:56 AM ----------
Found the answer. This thread can be closed. (1 Reply)
I created a new filesystem using dd and mounted:
I have a filesystem /FAW with 1Terra space
/dev/sdb1 1151331444 24742604 1068104612 3% /FAW
Steps I followed to create a new filesystem
# dd if=/dev/zero of=/FAW/vms/linux_vm/disk2.img bs=1 count=1024 seek=500G
# mke2fs... (10 Replies)
Hi,
I wanted to find out that in my database server which filesystems are shared storage and which filesystems are local. Like when I use df -k, it shows "filesystem" and "mounted on" but I want to know which one is shared and which one is local.
Please tell me the commands which I can run... (2 Replies)
Hi experts,
Need help on the below error please.
I am creating Filesystem and it fails with the below errors :(
Command: failed stdout: yes stderr: no
Before command completion, additional instructions may appear below.
0518-506 odmget: Cannot open object class PdAt
... (10 Replies)
Hello Team,
In a application filesystem, there is a process keep creating the log files. Due to that the filesystem keep getting full. Please let me know how to identify the process which is keep writing in the filesystem.
fuser -u <FS> will show only the user who using the filesystem.... (3 Replies)
Discussion started by: gowthamakanthan
3 Replies
LEARN ABOUT SUSE
irsend
IRSEND(1) FSF IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.8.7pre1 May 2010 IRSEND(1)