this morning (or maybe after a nights rest), revealed the issue from lspv . The lspv hdisk1 this morining also shows the pv state: missing, although lspv shows all the disks online. none of the aix lvm commands are working on the disk (reducevg complains about the open hd2 lv, which is /usr, even if I use -f to force it). syncvg is not running in the background.
This is AIX 6.1 TL7 SP 10 1415 build date. I have had to run odmgets and odmdeletes before on other boxes. a little bit of tedious cleanup isnt all that bad. Unfortunately this is in a remote DC, so I have to rely on another pair of hands to pull the disk.
AND ERRPT shows (finally)
Description
PV NO LONGER RELOCATING NEW BAD BLOCKS
Probable Causes
NON-MEDIA ERROR DURING SW RELOCATION
Failure Causes
DISK DRIVE
DISK DRIVE ELECTRONICS
STORAGE DEVICE CABLE
Hello,
how can i see easily the state of a mirrored disk on a AIX 4.3.3.
I try followed command:
lslv -m >lvname> but for me is not enough information.
thanx in advance
fenomen (2 Replies)
I've looked a little but haven't found a solid answer, assuming there is one.
What's better, hardware mirroring or ZFS mirroring? Common practice for us was to use the raid controllers on the Sun x86 servers. Now we've been using ZFS mirroring since U6. Any performance difference? Any other... (3 Replies)
Hi ,
I am new to SVM .when i try to learn RAID 1 , first they are creating two RAID 0 strips through
metainit d51 1 1 c0t0d0s2
metainit d52 1 1 c1t0d0s2
In the next step
metainit d50 -m d51
d50: Mirror is setup
next step is
metaattach d50 d52
d50 : submirror d52 is... (7 Replies)
Guys,
In my AIX 6.1 box the rootvg was on hdisk2, I tried to migrated it to hdisk0
Added hisk0 to rootvg , mirrored rootvg and changed bootlist and and sucessfully rebooted from hdisk0
Now I tried to remove the hdisk2 from rootvg so breaked mirror
-bash-3.00# unmirrorvg rootvg hdisk2... (3 Replies)
Dear all.
We have a very big issue on Attach HP EVA to IBM AIX powerpc singlepath.
the configurations on
lscfg -vl fcs2
fcs2 U789C.001.DQD8D74-P1-C2-T1 4Gb FC PCI Express Adapter (df1000fe)
Part Number.................10N7249
Serial... (3 Replies)
hello folks,
I have a 300GB ROOTVG volume groups with one filesystem /backup having 200GB allocated space
Now, I cannot alt disk clone or mirrorvg this hdisk with another smaller disk. The disk size has to be 300GB; I tried alt disk clone and mirrorvg , it doesn't work. you cannot copy LVs as... (9 Replies)
Hello,
aix 5.2, mirrored rootvg on hdisk0 and hdisk1. hdisk0 is dead. I can boot to cd, into sms, into maintenance mode. I can fsck all the various partitions on hdisk1 (the hd4 hd2 hd3, etc...) all is fine. But without the hdisk0 part of the mirror I cannot get the system to boot. ystem hangs on... (6 Replies)
Hello,
I have two hdisk in Power7 machine, the rootvg on hdisk0.
So to make a disk redundancy should make mirror or alt_clone and what is the different.
Appreciate your help
Thanks (1 Reply)
Hi everybody,
I have a little problem with my AIX 6.1, PowerHA 6.1 LVM mirroring.
I accidentally created logical volume cpsabcd2lv with external jfs2log loglv00 in the same volume group cpsdata2vg. Then I mirrored LV cpsabcd2lv on the second LUN in VG cpsdata2vg. My journal is unmirrored and... (0 Replies)
Discussion started by: Necronomic
0 Replies
LEARN ABOUT HPUX
vx_emerg_start
vx_emerg_start(1M)vx_emerg_start(1M)NAME
vx_emerg_start - start Veritas Volume Manager from recovery media
SYNOPSIS
vx_emerg_start [-m] [-r root_daname] hostname
DESCRIPTION
The vx_emerg_start utility can be used to start Veritas Volume Manager (VxVM) when a system is booted from alternate media, or when a sys-
tem has been booted into Maintenance Mode Boot (MMB) mode. This allows a rootable VxVM configuration to be repaired in the event of a cat-
astrophic failure.
vx_emerg_start verifies that the /etc/vx/volboot file exists, and checks the command-line arguments against the contents of this file.
OPTIONS -m Mounts the root file system contained on the rootvol volume after VxVM has been started. Prior to being mounted, the rootvol volume
is started and fsck is run on the root file system.
-r root_daname
Specifies the disk access name of one of the members of the root disk group that is to be imported. This option can be used to spec-
ify the appropriate root disk group when multiple generations of the same root disk group exist on the system under repair. If this
option is not specified, the desired root disk group may not be imported if multiple disk groups with the same name exist on the sys-
tem, and if one of these disk groups has a more recent timestamp.
ARGUMENTS
hostname
Specifies the system name (nodename) of the host system being repaired. This name is used to allow the desired root disk group to be
imported. It must match the name of the system being repaired, as it is unlikely to be recorded on the recovery media from which you
booted the system.
NOTES
HP-UX Maintenance Mode Boot (MMB) is intended for recovery from catastrophic failures that have prevented the target machine from booting.
If a VxVM root volume is mirrored, only one mirror is active when the system is in MMB mode. Any writes that are made to the root file sys-
tem in this mode can corrupt this file system when both mirrors are subsequently configured.
The vx_emerg_start script allows VxVM to be started while a system is in MMB mode, and marks the non-boot mirror plexes as stale. This
prevents corruption of the root volume or file system by forcing a subsequent recovery from the boot mirror to the non-boot mirrors to take
place.
USAGE
After VxVM has been started, various recovery options can be performed depending on the nature of the problem. It is recommended that you
use the vxprint command to determine the state of the configuration.
One common problem is when all the plexes of the root disk are stale as shown in the following sample output from vxprint:
v rootvol root DISABLED 393216 - ACTIVE -
pl rootvol-01 rootvol DISABLED 393216 - STALE -
sd rootdisk01-02 rootvol-01 ENABLED 393216 0 - -
pl rootvol-02 rootvol DISABLED 393216 - STALE -
pl rootvol-02 rootvol DISABLED 393216 - STALE -
sd rootdisk02-02 rootvol-02 ENABLED 393216 0 - -
In this case, the volume can usually be repaired by using the vxvol command as shown here:
vxvol -g 4.1ROOT -f start rootvol
If the volume is mirrored, it is put in read-write-back recovery mode. As the command is run in the foreground, it does not exit until the
recovery is complete. It is then recommended that you run fsck on the root file system, and mount it, before attempting to reboot the sys-
tem:
fsck -F vxfs -o full /dev/vx/rdsk/4.1ROOT/rootvol
mkdir /tmp_mnt
mount -F vxfs /dev/vx/dsk/4.1ROOT/rootvol /tmp_mnt
SEE ALSO fsck(1M), mkdir(1M), mount(1M), vxintro(1M), vxprint(1M), vxvol(1M)VxVM 5.0.31.1 24 Mar 2008 vx_emerg_start(1M)