in trying to rectify a stale lv problem I ran rmlvcopy <lv> 1 <primary disk> leaving the original os disk without lv copies other than the stale lv.
Both disks seem operational, but, lsvg rootg shows 1 stale pv.
The end goal is to re-attach the lv's back to hdisk1, and then attempt a reboot off of hdisk1 to sync things up again.
Last edited by jim mcnamara; 01-14-2019 at 01:46 PM..
Hello,
how can i see easily the state of a mirrored disk on a AIX 4.3.3.
I try followed command:
lslv -m >lvname> but for me is not enough information.
thanx in advance
fenomen (2 Replies)
I've looked a little but haven't found a solid answer, assuming there is one.
What's better, hardware mirroring or ZFS mirroring? Common practice for us was to use the raid controllers on the Sun x86 servers. Now we've been using ZFS mirroring since U6. Any performance difference? Any other... (3 Replies)
Hi ,
I am new to SVM .when i try to learn RAID 1 , first they are creating two RAID 0 strips through
metainit d51 1 1 c0t0d0s2
metainit d52 1 1 c1t0d0s2
In the next step
metainit d50 -m d51
d50: Mirror is setup
next step is
metaattach d50 d52
d50 : submirror d52 is... (7 Replies)
Guys,
In my AIX 6.1 box the rootvg was on hdisk2, I tried to migrated it to hdisk0
Added hisk0 to rootvg , mirrored rootvg and changed bootlist and and sucessfully rebooted from hdisk0
Now I tried to remove the hdisk2 from rootvg so breaked mirror
-bash-3.00# unmirrorvg rootvg hdisk2... (3 Replies)
Dear all.
We have a very big issue on Attach HP EVA to IBM AIX powerpc singlepath.
the configurations on
lscfg -vl fcs2
fcs2 U789C.001.DQD8D74-P1-C2-T1 4Gb FC PCI Express Adapter (df1000fe)
Part Number.................10N7249
Serial... (3 Replies)
hello folks,
I have a 300GB ROOTVG volume groups with one filesystem /backup having 200GB allocated space
Now, I cannot alt disk clone or mirrorvg this hdisk with another smaller disk. The disk size has to be 300GB; I tried alt disk clone and mirrorvg , it doesn't work. you cannot copy LVs as... (9 Replies)
Hello,
aix 5.2, mirrored rootvg on hdisk0 and hdisk1. hdisk0 is dead. I can boot to cd, into sms, into maintenance mode. I can fsck all the various partitions on hdisk1 (the hd4 hd2 hd3, etc...) all is fine. But without the hdisk0 part of the mirror I cannot get the system to boot. ystem hangs on... (6 Replies)
Hello,
I have two hdisk in Power7 machine, the rootvg on hdisk0.
So to make a disk redundancy should make mirror or alt_clone and what is the different.
Appreciate your help
Thanks (1 Reply)
Hi everybody,
I have a little problem with my AIX 6.1, PowerHA 6.1 LVM mirroring.
I accidentally created logical volume cpsabcd2lv with external jfs2log loglv00 in the same volume group cpsdata2vg. Then I mirrored LV cpsabcd2lv on the second LUN in VG cpsdata2vg. My journal is unmirrored and... (0 Replies)
Discussion started by: Necronomic
0 Replies
LEARN ABOUT OSF1
volrootmir
volrootmir(8) System Manager's Manual volrootmir(8)NAME
volrootmir - Mirror areas necessary for booting to a new disk
SYNOPSIS
/usr/sbin/volrootmir [-a] [nconfig=count] target_disk [swap=target_partition]
OPTIONS
Specifies that all volumes on the system disk be mirrored, not just the root and swap volumes, rootvol and swapvol.
DESCRIPTION
The volrootmir script causes a mirror copy of areas of the root disk involved in booting to be made on the specified target disk.
When used without the -a option, volrootmir adds mirrors of the root and swap volumes and allocates them on the new disk. In addition, all
disk regions required for booting are set up and partitions for the new volume mirrors are created.
When used with the -a option, volrootmir mirrors all in-use partitions on the system disk.
To mirror a swap volume that is on a separate disk from the root volume, the swap attribute must be used to specify a separate target for
the swap mirror.
The target disk(s) must be at least as large as the sum of the sizes of rootvol and swapvol. Also, the physical disk should not have any
disk partition in use.
This script can be called from the voldiskadm menus by choosing the Mirror volumes on a disk operation.
ATTRIBUTES
Specifies the number of log copies and copies of the configuration database, for example, nconfig=2. Specifies that the swap volume,
swapvol, be mirrored on a separate disk, as specified by target_partition.
EXAMPLES
The following command mirrors the rootvol and swapvol volumes onto the target disk, dsk3. This command will fail if swapvol is on a differ-
ent disk from rootvol.
# volrootmir dsk3 The following command mirrors rootvol, swapvol, and any other volumes on the root disk onto the target disk, dsk3.
This command will fail if swapvol is on a different disk from rootvol.
# volrootmir -a dsk3 The following command mirrors rootvol on disk dsk3, swapvol onto partition dsk7d, and any other volumes on the
root disk onto disk dsk3. This command will fail if swapvol is on the same disk as rootvol.
# volrootmir -a dsk3 swap=dsk7d The following command mirrors rootvol onto disk dsk3 and swapvol onto partition dsk7d. This command
will fail if swapvol is on the same disk as rootvol.
# volrootmir dsk3 swap=dsk7d
SEE ALSO volintro(8), voldiskadm(8)volrootmir(8)