I am trying to configure dump devices on my AIX server. Running 7100-03-04-1441. My dump device needs to be about 2GB in size. My PP Size is 1024MB, so I create the device with 2 PPs. When I run lslv on the dump device, it shows the 2 PPs, and a PP Size of 1024 megabytes. However, a dumpcheck -p shows that my dump device is only 256MB in size. dumpcheck seems to think my PP Size is only 128MB. Here you can see the output of lslv dump2lv showing the PP Size and PPs:
And here you can see dumpcheck showing the size being only 262144 kb:
My rootvg does show that the size used is indeed 2GB. So where is this extra space going, and why is dumpcheck not reporting all the size for my dump device?
Thanks in advance!
Moderator's Comments:
edit by bakunin: please use CODE-tags for data and terminal output too, thank you.
Hi All,
is there any way to find out the optimal/would be size of the cor dump file generated by the system while a process got terminated abnormally?
Basically we have been asked to provide the size of the core dump file being generated by the administrators who maintained the UNIX boxes.... (4 Replies)
Friends, while taking backup on /dev/rmt/0cn it is showing device does not exists.
I have checked /dev/rmt 0cn is present there with link file created in /devices/pci@8,700000/scsi@5/st@5,0:cn
I have checked cd /devices/pci@8,700000/scsi@5 but st@5,0:cn is not there. But I found st@3,0:cn.
... (3 Replies)
1.what is dump device in AIX?...
2. i m getting this error message
The largest dump device is too small.
when i check the paging space , it is used only 41%
any help welcome (4 Replies)
Hey guys - I have made this script and for some reason, I dont see time stamp as "Month-Day-YYYY Hours-Mins" - all i see is Month and Day.
Also, my file size is approximated. For example, if the size is 19,606KB - the script shows as 20M. Is there a way to see the exact file size?
How do i... (2 Replies)
Hi,
I have a very frustrating issue! I hope you guys can assist
When a disk is presented out the iSCSI target display a lower disk capacity
SOLARIS VERSION is SOLARIS 10 05/09 Kernel Patch 139555-31
ISCSI Patch 119090-31, 141878-11
Unix Commands To discover Target
bash-3.00# i... (0 Replies)
E87EF1BE 0605150011 P O dumpcheck The largest dump device is too small.
bash-3.00$ errpt -aj E87EF1BE | more
---------------------------------------------------------------------------
LABEL: DMPCHK_TOOSMALL
IDENTIFIER: E87EF1BE
Date/Time: Sun Jun 5 15:00:01... (4 Replies)
Hi
how to change the primary dump device in a vio server ?
$ ioslevel
2.2.0.11-FP-24 SP-01
$ oem_setup_env
# sysdumpdev -l
primary /dev/sysdumpnull
secondary /dev/hd6
copy directory /var/adm/ras
forced copy flag TRUE
always allow dump TRUE
dump... (1 Reply)
Hi all
I have a query about dump device in aix, i asked this question on interview.
what is dump device, how to add dump device & its work.
kindly give this answer,
thanks in advance.
:confused: (1 Reply)
Hello Guys,
I need a little help here. I have been studying crash dump and per what I am reading, you can dedicate a slice to use as a dump device. Now when you dedicate this slice, do you have to :
1) create a mount point?
2) add entry in /etc/vfstab?
3) is this slice wu or wm?
4) should... (3 Replies)
Hi,
This is Solaris-10 box and in few of file-system (root file-system of non global zones), usage/available is not showing correct size. I am not able to figure out, what is eating up this space.
Global Server - bdrpod01
Non Global zone - bdrpod01-zputq01
root@bdrpod01:/root# df -h... (2 Replies)
Discussion started by: solaris_1977
2 Replies
LEARN ABOUT SUSE
pcilib
pcilib(7) The PCI Utilities pcilib(7)NAME
pcilib - a library for accessing PCI devices
DESCRIPTION
The PCI library (also known as pcilib and libpci) is a portable library for accessing PCI devices and their configuration space.
ACCESS METHODS
The library supports a variety of methods to access the configuration space on different operating systems. By default, the first matching
method in this list is used, but you can specify override the decision (see the -A switch of lspci).
linux-sysfs
The /sys filesystem on Linux 2.6 and newer. The standard header of the config space is available to all users, the rest only to
root. Supports extended configuration space, PCI domains, VPD (from Linux 2.6.26), physical slots (also since Linux 2.6.26) and
information on attached kernel drivers.
linux-proc
The /proc/bus/pci interface supported by Linux 2.1 and newer. The standard header of the config space is available to all users, the
rest only to root.
intel-conf1
Direct hardware access via Intel configuration mechanism 1. Available on i386 and compatibles on Linux, Solaris/x86, GNU Hurd and
Windows. Requires root privileges.
intel-conf2
Direct hardware access via Intel configuration mechanism 2. Available on i386 and compatibles on Linux, Solaris/x86, GNU Hurd and
Windows. Requires root privileges. Warning: This method is able to address only the first 16 devices on any bus and it seems to be
very unreliable in many cases.
fbsd-device
The /dev/pci device on FreeBSD. Requires root privileges.
aix-device
Access method used on AIX. Requires root privileges.
nbsd-libpci
The /dev/pci0 device on NetBSD accessed using the local libpci library.
obsd-device
The /dev/pci device on OpenBSD. Requires root privileges.
dump Read the contents of configuration registers from a file specified in the dump.name parameter. The format corresponds to the output
of lspci -x.
PARAMETERS
The library is controlled by several parameters. They should have sensible default values, but in case you want to do something unusual (or
even something weird), you can override them (see the -O switch of lspci).
Parameters of specific access methods
dump.name
Name of the bus dump file to read from.
fbsd.path
Path to the FreeBSD PCI device.
nbsd.path
Path to the NetBSD PCI device.
obsd.path
Path to the OpenBSD PCI device.
proc.path
Path to the procfs bus tree.
sysfs.path
Path to the sysfs device tree.
Parameters for resolving of ID's via DNS
net.domain
DNS domain containing the ID database.
net.cache_name
Name of the file used for caching of resolved ID's.
SEE ALSO lspci(8), setpci(8), update-pciids(8)AUTHOR
The PCI Utilities are maintained by Martin Mares <mj@ucw.cz>.
pciutils-3.1.7 31 January 2010 pcilib(7)