On Solaris 10 zones they are configured autonomously and are not aware of the global zone configuration which is independent of the local zone.
On Solaris 10 the default gateway is configured in /etc/defaultrouter which normally contains one single line with a left justified ip address of the gateway, for example:
and that's all there is in the file. It may be edited with your favorite editor and is then read at (zone) boot time.
So you can mess with this inside the local zone and not affect your global zone.
Can anybody help me on how to configure the network in Sun Solaris. This is my first time to touch sun system please help!!!:confused: :confused: (2 Replies)
I am seeking help from the gurus in this forum and hope that I can find answers soon. Anyone who provide the answers will be greatly appreciated.
I have a sparc box with Solaris 10 on it. We install Solaris with zone structure. One global zone and two other zone. I installed Oracle DB on global... (6 Replies)
Hi..i have installed solaris 10 on vmware. I m not able connect to internet.
pls help in detail. how to solve the problem. During the installation i have put no DHCP. cofigured manually ( Ip 192.168.1.9) default gateway 192.168.1.1 . (3 Replies)
Hi
i have created a solaris zone but have not yet connected any network cables for this new zone,
can i set the zone up without running the command 'add net' and not adding an ip or physical interface?
i tried to add dummy internet settings and get this
zonecfg:coddr> add net... (4 Replies)
Hi, guys, recently my os changed to solaris 10, and i want to share the printer with another computer whose os is also solaris. Is there anyone could give me a hint to fix this problem.
lpadmin -p hp5200 -v /dev/null -A write -n... (1 Reply)
Hi,
I have installed Solaris 10 on VMware7, When i used ifconfig -a to check network interface, it has shown lo0 as loopback interface.
Please advise how to configure network interfaces using VMware. (1 Reply)
I am trying to create a branded 10 zone on a Solaris 11.1 control domain. I am using a flar image (cpio) from an existing LDOM. Here are the steps taken after flarcreate.
#zonecfg -z <device>
>create -b
>set brand=solaris10
>set zonepath=/zonez/<device>
>set ip-type=exclusive
>add net... (1 Reply)
Hello, I followed these instructions to create a Solaris 11 zone:
http://www.oracle.com/technetwork/articles/servers-storage-admin/o11-092-s11-zones-intro-524494.html
And I am unable to ping anything from the Local Zone except for the IP address of the global zone.
My global zone has an IP... (6 Replies)
Have 2 nics on physical system
net0 phys 1500 up --
net1 phys 1500 up --
1. I want to create a link aggregation with LACP enabled with above 2 nics
2. Create port-group(Like we create on ESXi) with VLAN-ID 2141
3. And assign this... (0 Replies)
Hi, hoping someone can help, its been a while since I used Solaris.
After creating a NGZ (non global zone), the NGZ can access the GZ (Global Zone) and the GZ can access the NGZ (using ssh, zlogin)
However, the NGZ cannot access any other netwqork devices, it can't even see the default router
... (2 Replies)
Discussion started by: GazinLincoln
2 Replies
LEARN ABOUT REDHAT
atalkd
ATALKD(8) System Manager's Manual ATALKD(8)NAME
atalkd - AppleTalk RTMP, NBP, ZIP, and AEP manager
SYNOPSIS
/usr/sbin/atalkd [ -f configfile ] [ -1 | -2 ]
DESCRIPTION
atalkd is responsible for all user level AppleTalk network management. This includes routing, name registration and lookup, zone lookup,
and the AppleTalk Echo Protocol (similar to ping(8)). atalkd is typically started at boot time, out of /etc/rc. It first reads from its
configuration file, /etc/atalk//atalkd.conf. If there is no configuration file, atalkd will attempt to configure all available interfaces
and will create a configuration file. The file consists of a series of interfaces, one per line. Lines with `#' in the first column are
ignored, as are blank lines. The syntax is
interface [ -seed ] [ -phase number ] [ -net net-range ] [ -addr address ] [ -zone zonename ] ...
Note that all field except the interface are optional. The loopback interface is configured automatically. If -seed is specified, all
other fields must be present. Also, atalkd will exit during bootstrapping, if a router disagrees with its seed information. If -seed is
not given, all other information may be overriden during auto-configuration. If no -phase option is given, the default phase as given on
the command line is used (the default is 2). If -addr is given and -net is not, a net-range of one is assumed.
The first -zone directive for each interface is the ``default'' zone. Under Phase 1, there is only one zone. Under Phase 2, all routers
on the network are configured with the default zone and must agree. atalkd maps ``*'' to the default zone of the first interface. Note:
The default zone for a machine is determined by the configuration of the local routers; to appear in a non-default zone, each service, e.g.
afpd, must individually specify the desired zone. See also nbp_name(3).
ROUTING
If you are connecting a netatalk router to an existing AppleTalk internet, you should first contact your local network administrators to
obtain appropriate network addresses.
atalkd can provide routing between interfaces by configuring multiple interfaces. Each interface must be assigned a unique net-range
between 1 and 65279 (0 and 65535 are illegal, and addresses between 65280 and 65534 are reserved for startup). It is best to choose the
smallest useful net-range, i.e. if you have three machines on an Ethernet, don't chose a net-range of 1000-2000. Each net-range may have
an arbitrary list of zones associated with it.
EXAMPLE
Below is an example configuration file for a sun4/40. The machine has two interfaces, ``le0'' and ``le1''. The ``le0'' interface is con-
figured automatically from other routers on the network. The machine is the only router for the ``le1'' interface.
le0
le1 -seed -net 9461-9471 -zone netatalk -zone Argus
atalkd automatically acts as a router if there is more than one interface.
FILES
/etc/atalk//atalkd.conf configuration file
BUGS
On some systems, atalkd can not be restarted.
netatalk 1.3 17 Nov 1995 ATALKD(8)