09-25-2018
Quote:
Originally Posted by
bakunin
I'd say the IVM awaits the interface to be where you are trying to find them. But it is not any more successful in that venture than you are. Therefore, eliminate all possible problems and connect directly to the system with a cross-over cable as suggested. That is a sure-fire method and if this fails the box is a case for the technician.
I hope this helps.
bakunin
Thanks, I have to try two things:
1- Reset Toggle which is on the board (not tried yet)
2- Cross Cable : May be that will work (just informing you, it was working with straight cable, then i reconfigured the deconfigured memory and then stopped connecting to ASMI via browser)
10 More Discussions You Might Find Interesting
1. HP-UX
Hello HP-UX Gurus,
I am having issues trying to start an x-session via eXceed 7.1.
When I bring up eXceed via XDMCP Braodcast I see the host name and IP Address but when I try to connect the X window does not come up.
I made the modification to the following file “/etc/dt/config/Xaccess”... (2 Replies)
Discussion started by: smokie
2 Replies
2. Solaris
Hi friends
recently i have installed SXDE 1/08 into my machine,and i installed wifi driver also
its working fine,Recently i was unable to connect to Internet,I have not changed any configurations and any installations,thing is that i got my iwk0 interface is UP and IP address also and i can... (6 Replies)
Discussion started by: srinivas2828
6 Replies
3. Emergency UNIX and Linux Support
I shall explain the situation that I am facing to the best extent possible. I require some help, as this situation is an urgent one.
I am trying to automate sending data from one AIX machine to another. A script runs that tries to push data received from an upstream application to another AIX... (7 Replies)
Discussion started by: ggayathri
7 Replies
4. AIX
Hi friends
How to clear the asmi deconfiguration errors.recently on cpu got deconfigured ibm assist to clear the error and to update the firmware please help me
raj (0 Replies)
Discussion started by: senmak
0 Replies
5. AIX
Hi
I am facing very strange issue on my vio server 5 vio clients are confgured, now I am to connect 3 vio client , i am unable to connect 2 vio client my ip address,subnet mask,gateway is correct.
i have rebooted and reconfigured the ip address, but issue is persists.
Kindly suggest how to... (0 Replies)
Discussion started by: manoj.solaris
0 Replies
6. HP-UX
Hi,
I'm trying to connect from an HP-UX with SSH2 client(ssh2 3.1.2 on hppa1.1-hp-hpux11.00) to an SSH2 server on a VxWorks system. The SSH connection is failing with the below connection logs:
> /usr/local/bin/ssh2 -v -l testuser 10.10.10.10
debug: Ssh2/ssh2.c:1391: Using file... (4 Replies)
Discussion started by: ysafi
4 Replies
7. Shell Programming and Scripting
I am trying to connect to SQL plus through unix but i am getting below error
'ksh: sqlplus: not found'
note i am running this from /home/xxx
do i need to set any environmental variable for this. below is my code
echo " hello world"
sqlplus -s apps/CAF78GEN<<EOF
set heading... (4 Replies)
Discussion started by: karnatis
4 Replies
8. Red Hat
I have managed to install Broadcom BCM43228 Wireless adapter on a laptop running CentOS 5.9 using instructions at:
wiki.centos.org/HowTos/Laptops/Wireless/Broadcom
I had the problem "Error for wireless request "Set Encode" (8B2A): SET failed on device... mentioned on the same page and solved... (0 Replies)
Discussion started by: cooltoad
0 Replies
9. Red Hat
Hello,
I just installed CentOS 7 (Server with GUI) and guess what I could install Virtual Box Guest additions without installing any extra package/software which is great news !
Now bad news or not so great news.
My Host OS is Windows 10, Virtual Box is the virtualization software. CentOS7-1... (0 Replies)
Discussion started by: bluemind2005
0 Replies
10. Solaris
hi
I am having issues when trying to connect using ftp, I am having the following error:
User (10.100.48.73:(none)): moz
331 Password required for moza.
Password:
530 Login incorrect.
Login failed.
ftp> by
221 Goodbye.
I have created a user like this:
useradd -g 10 -d /lam/moza -m -s... (11 Replies)
Discussion started by: fretagi
11 Replies
CZ(4) BSD Kernel Interfaces Manual CZ(4)
NAME
cz -- Cyclades-Z series multi-port serial adapter device driver
SYNOPSIS
cz* at pci? dev ? function ?
DESCRIPTION
The cz device driver supports the Cyclades-Z series of multi-port serial adapters. The Cyclades-Z is an intelligent serial controller com-
prising:
o PLX9060ES PCI bus interface
o Xilinx XC5204 FPGA
o IDT R3052 MIPS CPU
The MIPS CPU runs firmware provided by the device driver. Communication with the MIPS is performed by modifying data structures located in
board local RAM or host RAM.
The Cyclades-Z comes in three basic flavors:
o Cyclades-8Zo rev. 1 -- This is an older 8-port board with no FPGA. The serial ports are provided by an octopus cable.
o Cyclades-8Zo rev. 2 -- This is the newer 8-port board. The serial ports are provided by an octopus cable.
o Cyclades-Ze -- This is the expandable version of the Cyclades-Z. It uses an HD-50 SCSI cable to connect the board to a 1U rack
mountable serial expansion box. Each box has 16 RJ45 serial ports, and up to 4 boxes may be chained together, for a total of 64
ports. Boxes 3 and 4 require their own external power supply, otherwise the firmware will refuse to start (as it cannot communi-
cate with the UARTs in those boxes).
The Cyclades-Z has several features to improve performance under high serial I/O load:
o The board may operate in interrupt-driven mode or polled mode to reduce interrupt load.
o Each channel has a large input and output buffer.
o Each channel may be programmed to generate an interrupt based on reception of a specific character, e.g. a PPP End-Of-Frame charac-
ter.
o The MIPS CPU on the board performs all flow-control handling.
FILES
/dev/ttyCZnnnn -- dial-in (normal) TTY device
/dev/dtyCZnnnn -- dial-out TTY device
SEE ALSO
pci(4), termios(4), tty(4)
HISTORY
The cz driver first appeared in NetBSD 1.5.
AUTHORS
The cz driver was written by Jason R. Thorpe <thorpej@zembu.com> and
Bill Studenmund <wrstuden@zembu.com> of Zembu Labs, Inc.
BUGS
The cz driver does not currently implement communication via host RAM. While this may improve performance by reducing the number of PCI mem-
ory space read/write cycles, it is not straightforward to implement with the current bus_dma(9) API.
Interrupt mode has not been tested.
There is no support for reading or writing the EEPROM connected to the PLX PCI bus controller.
BSD
May 17, 2000 BSD