Different behavior between bash shell and bash script for cmd
So I'm trying to pass certain json elements as env vars and use them later on in a script.
Sample json:
(part of the) script:
The problem I'm having is that Element2 is breaking the line when exporting but if I just run "echo $JSON | jq "{Element1,Element2,Element3} | to_entries|map(\"\(.key)=\(.value|tostring)\")|.[]"" at the cmd line, it looks fine:
Actual output of script:
As can be seen, the export command inserts single quotes into the "Element2" and I'm not sure where they come from.
The second variable (Element2) only contains the first element in the string (Name,). The behavior makes sense since the line is broken but for the life in me I cannot understand how or why the export command inserts them.
Does anyone know of a way to mimic the up arrow/down arrow type bash behavior within a shell script?
Say I have a scripted menu, and would like to be able to up arrow to bring up the last X number of lines of user input?
Thanks to anybody with a suggestion. :) (0 Replies)
hi,
i have a script that runs on bash and would like to run it on a machine that has csh and bash. the default setting on that machine is csh. i dont want to change my code to run it with a csh shell. is there any way i can run the script (written in bash) on this machine? in other words is there... (3 Replies)
The block below isn't a surprise:$ ls
file1 file2 file3
$ x=*
$ echo $x
file1 file2 file3
$ echo '$x'
$x
$ echo "$x"
*
$But I found this block a bit bewildering:$ echo $x'
>'
*
$I'm wondering why substitution wasn't performed on the $x, since it was unquoted (as far as I can tell).... (5 Replies)
Hi all
I am relatively new to linux (specifically red hat). I have installed Fedora 13 on my machine and started playing with the terminal when i found a very strange behavior when typing a command that is not found:
the terminal does not prompt me back. In other words, i am logged as root (or... (4 Replies)
run_xfs_fsr is a xfs filesystem maintenance script designed to run under cron. The system is a home theater personal computer running mythbuntu 10.10, and is accessed remotely for these tests. cron runs a script, (xfs_fsr.sh) at 02:30 that runs the subject script under BASH and sets the... (3 Replies)
I am trying to get my history in sync in multiple bash sections and things aren't working the way I expect.
Desired behavior, hitting esc-K in all bash sessions (same userid and machine) will use the same history.
Observed behavior: Esc-k shows the history of the current session, rather than... (8 Replies)
# check host value regex='^(||1|2|25)(\.(||1|2|25)){3}$' if ')" != "" ]; then if ]; then echo host $host not found exit 4 fi elif ]; then echo $host is an invalid host address exit 5 fi
espeacailly the top regex part?
---------- Post updated at 06:58 PM ---------- Previous update was... (1 Reply)
Good Morning
I think there may be something I dont understand fully.
The following code works well, but I dont like the set domen method.
#!/bin/bash
#
domen="y"
while
do
echo " M A I N - M E N U"
echo "1. Contents of /etc/passwd"
echo "2. List of users currently logged"
echo... (10 Replies)
I'm new to utilities like socat and netcat and I'm not clear if they will do what I need.
I have a "compileDeployStartWebServer.sh" script and a "StartBrowser.sh" script that are started by emacs/elisp at the same time in two different processes.
I'm using Cygwin bash on Windows 10.
My... (3 Replies)
In Bash shell - the ps -ef shows only the /bin/bash but the script name is not displayed ? Is there any way to get the script names for the process command ?
--- Post updated at 08:39 AM ---
in KSH (Korn Shell), my command output shows the script names but when run in the Bash Shell... (3 Replies)
Discussion started by: i4ismail
3 Replies
LEARN ABOUT DEBIAN
irsend
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)