Hmmmmm.......so both members of the RAID are shown as present and active....good.
So this RAID is on device /dev/md0
(After the RAID is create you should never address these disks as their original devices (/dev/dsk/... or whatever the format is on Ubuntu), only as /dev/md0.
What command are you using to mount the RAID where you want it? Are you specifying /dev/md0? If so, the system should know that it's a RAID mirror and if one disk fails, access to data on the surviving copy should remain.
Hi,
I am facing problem while accessing samba share on Linux 5.1 from windows, though I have done the same configuration on Linux 4 (Update 2), on Red Hat 4.0 it is working but while on Linux 5.1 these configuration are not working, I have disabled the firewall also.
Kindly suggest me... (1 Reply)
Hi everyone! I'm trying to run a script when a folder is shared and when it stop being shared.
Is there something like .start_share or .stop_share scripts in Samba where I could run some commands?:confused:
edit: maybe with a wrapper in smbmount but I share folders via nautilus. Any ideas? (0 Replies)
Hi I have an issue with a client. He was able to use his mounted Samba share for a long time. However, a couple of days ago, he wasn't able to access all of his files all of a sudden. He still see's the share and majority of the files, but not some that he needs.
I checked with Secure CRT on... (1 Reply)
Hi All, I've been trying to configure samba on Solaris 10 to allow me to have one share that is open and writable to all users and have the rest of my shares password protected by a generic account.
If I set my security to user, my secured shares work just fine and prompt accordingly, but when... (0 Replies)
I am setup a samba share server which is authenticating from Active Directory.
I am able to access the share with AD user but not able to access when group defined in "valid users" parameters.
below are the steps i performed.
In smb.conf
workgroup = QASLABS
password server =... (3 Replies)
Hi ,
In samba i have shared my home directory,
but its showing as a printer.
Not able to share data.
$ smbclient -L 192.168.122.1
Enter priyank's password:
Domain= OS= Server=
Sharename Type Comment
--------- ---- -------
shared_priyank Printer ... (3 Replies)
Hello,
I want to connect to two samba shares both on the same Linux box but each with a different username from a windows server 2008. I created 2 gpos to connect and I can connect to the shares individually via net use command, but once I entered credentials for one of the shares, it seems I... (1 Reply)
Long running samba share. Never have any problems,
Suddenly started asking windows users for password - which doesnt work. Tried to manually reset smb password and manually map - still wrong password.
Restart samba? (2 Replies)
Hi,
I need to mount a directory from a Windows server to a CentOS box.
The Windows server used is Windows Server 2003, and the path to the directory that I want to mount on CentOS is C:\Tomcat6\webapps\NASApp\logs.
I am not sure of the correct way to mount this on CentOS, as most of the... (2 Replies)
Discussion started by: anaigini45
2 Replies
LEARN ABOUT NETBSD
arcmsr
ARCMSR(4) BSD Kernel Interfaces Manual ARCMSR(4)NAME
arcmsr -- Areca Technology Corporation SATA/SAS RAID controller
SYNOPSIS
arcmsr* at pci? dev ? function ?
DESCRIPTION
The arcmsr driver provides support for the PCI-X and PCI Express RAID controllers from Areca Technology Corporation:
- ARC-1110 PCI-X 4 Port SATA RAID Controller
- ARC-1110ML PCI-X 4 Port SATA RAID Controller
- ARC-1120 PCI-X 8 Port SATA RAID Controller
- ARC-1120ML PCI-X 8 Port SATA RAID Controller
- ARC-1130 PCI-X 12 Port SATA RAID Controller
- ARC-1130ML PCI-X 12 Port SATA RAID Controller
- ARC-1160 PCI-X 16 Port SATA RAID Controller
- ARC-1160ML PCI-X 16 Port SATA RAID Controller
- ARC-1170 PCI-X 24 Port SATA RAID Controller
- ARC-1200 Rev A PCI Express 2 Port SATA RAID Controller
- ARC-1202 PCI Express 2 Port SATA RAID Controller
- ARC-1210 PCI Express 4 Port SATA RAID Controller
- ARC-1220 PCI Express 8 Port SATA RAID Controller
- ARC-1230 PCI Express 12 Port SATA RAID Controller
- ARC-1230ML PCI Express 12 Port SATA RAID Controller
- ARC-1231ML PCI Express 12 Port SATA RAID Controller
- ARC-1260 PCI Express 16 Port SATA RAID Controller
- ARC-1260ML PCI Express 16 Port SATA RAID Controller
- ARC-1261ML PCI Express 16 Port SATA RAID Controller
- ARC-1280 PCI Express 24 Port SATA RAID Controller
- ARC-1280ML PCI Express 24 Port SATA RAID Controller
- ARC-1680 PCI Express 8 Port SAS RAID Controller
- ARC-1680LP PCI Express 8 Port SAS RAID Controller
- ARC-1680i PCI Express 8 Port SAS RAID Controller
- ARC-1680x PCI Express 8 Port SAS RAID Controller
- ARC-1681 PCI-X 8 Port SAS RAID Controller
These controllers support RAID levels 0, 1, 1E, 3, 5, 6, and JBOD using either SAS or SATA II drives.
arcmsr supports management and monitoring of the controller through the bioctl(8) and envstat(8) commands.
Please note, however, that to use some features that require special privileges, such as creating/removing hot-spares, pass-through disks or
RAID volumes will require to have the password disabled in the firmware; otherwise a Permission denied error will be reported by bioctl(8).
When a RAID 1 or 1+0 volume is created, either through the bioctl(8) command or controller's firmware, the volume won't be accessible until
the initialization is done. A way to get access to the sd(4) device that corresponds to that volume without rebooting, is to issue the fol-
lowing command (once the initialization is finished):
$ scsictl scsibus0 scan any any
The arcmsr driver will also report to the kernel log buffer any error that might appear when handling firmware commands, such as used by the
bioctl(8) command.
EVENTS
The arcmsr driver is able to send events to powerd(8) if a volume or any drive connected to the volume is not online. The state-changed
event will be sent to the /etc/powerd/scripts/sensor_drive script when such condition happens.
SEE ALSO intro(4), pci(4), scsi(4), sd(4), bioctl(8), envstat(8), powerd(8), scsictl(8)HISTORY
The arcmsr driver first appeared in NetBSD 5.0.
AUTHORS
The arcmsr driver was originally written for OpenBSD by David Gwynne. It was ported to NetBSD and extended by Juan Romero Pardines.
BSD March 3, 2008 BSD