Moving file systems from one server to the other Post: 303021316

Sponsored Content

Operating Systems Solaris Moving file systems from one server to the other Post 303021316 by fretagi on Wednesday 8th of August 2018 05:20:24 AM

08-08-2018

Registered User

this is what I get:

Code:

bash-3.00# format
Searching for disks...done


AVAILABLE DISK SELECTIONS:
       0. c0t5000C5003A0028FFd0 <SUN300G cyl 46873 alt 2 hd 20 sec 625>
          /scsi_vhci/disk@g5000c5003a0028ff
       1. c0t5000C5003A034CFFd0 <SUN300G cyl 46873 alt 2 hd 20 sec 625>
          /scsi_vhci/disk@g5000c5003a034cff
       2. c9t4d0 <NETAPP-LUN-8020 cyl 5630 alt 2 hd 16 sec 256>
          /iscsi/disk@0000iqn.1992-08.com.netapp%3Asn.14224149003E8,0
Specify disk (enter its number): 2
selecting c9t4d0
[disk formatted]


FORMAT MENU:
        disk       - select a disk
        type       - select (define) a disk type
        partition  - select (define) a partition table
        current    - describe the current disk
        format     - format and analyze the disk
        repair     - repair a defective sector
        label      - write label to the disk
        analyze    - surface analysis
        defect     - defect list management
        backup     - search for backup labels
        verify     - read and display labels
        save       - save new disk/partition definitions
        inquiry    - show vendor, product and revision
        volname    - set 8-character volume name
        !<cmd>     - execute <cmd>, then return
        quit
format> p


PARTITION MENU:
        0      - change `0' partition
        1      - change `1' partition
        2      - change `2' partition
        3      - change `3' partition
        4      - change `4' partition
        5      - change `5' partition
        6      - change `6' partition
        7      - change `7' partition
        select - select a predefined table
        modify - modify a predefined partition table
        name   - name the current table
        print  - display the current table
        label  - write partition map and label to the disk
        !<cmd> - execute <cmd>, then return
        quit
partition>

partition> p
Current partition table (original):
Total disk cylinders available: 5630 + 2 (reserved cylinders)

Part      Tag    Flag     Cylinders        Size            Blocks
  0       root    wm       0 -   63      128.00MB    (64/0/0)     262144
  1       swap    wu      64 -  127      128.00MB    (64/0/0)     262144
  2     backup    wu       0 - 5629       11.00GB    (5630/0/0) 23060480
  3 unassigned    wm       0               0         (0/0/0)           0
  4 unassigned    wm       0               0         (0/0/0)           0
  5 unassigned    wm       0               0         (0/0/0)           0
  6        usr    wm     128 - 5629       10.75GB    (5502/0/0) 22536192
  7 unassigned    wm       0               0         (0/0/0)           0

partition>

------ Post updated at 11:20 AM ------

I beleive should be /dev/dsk/c9t4d0s6....

fretagi

View Public Profile for fretagi

Find all posts by fretagi

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Moving from one web server to another

Hi All, Thanks for taking the time to read and respond to my post. I am a Unix neophyte. I can install scripts, move around some and perform basic functions - mostly related to websites and alway with a resource guide in front of me. I currently have 12 websites hosted on a VPS and I would...

2. UNIX for Dummies Questions & Answers

moving files from one server to another

Hi guys, I have few files on my laptop(win XP). I am connected to a network called 'asx'(intranet). I have ssh2 and reflections on my system. I need to copy these few files from my system to a folder on the UNIX server(called 'CSSX'). Please can anyone explain me how to acheive this? I am...

3. Solaris

Do I need to reboot Solaris 10 server for changes in /etc/systems ?

Hi, I have upgraded my Solaris 10 2005 to Solaris 10 2007. I am facing one bug, id: 6550904. To override this issue I have done following changes in /etc/systems: set max_uheap_lpsize = 0x2000 set max_ustack_lpsize = 0x2000 set max_privmap_lpsize = 0x2000 set max_shm_lpsize =...

4. AIX

moving to new server

I'm moving an application from an old RS6000 running 4.3.2 to a p5 running 5.3. Could someone point me a the direction on docs to perform such a function? Critical OS files, moving of printers and print queues especially. thanks

5. Shell Programming and Scripting

Moving files from one server to another server every 5 min

HI All, I am trying to automate my stuff to make 'to-do-easier'. I am new to shell scripting. I need help to you regarding the below problem. I have one directory in my server, frequently files will store in that directory. I want to move that files into another server on every 5...

6. Shell Programming and Scripting

Moving a database from one server to another

I hope I'm posting this in the correct section. I'm trying to move a database from one server to another. This is the code I'm using... tar czf - vbdatabase.sql | ssh username@full.domain.com 'cat > /home/cpanelusername/vbdatabase.tar.gz ... but all I'm getting is a ">" and then nothing...

7. Linux

Moving Whole OS Centos Server

I currently have a web server its on a small harddrive I didn't know my site would grow so fast but now I need a bigger hard drive. Instead of adding another harddrive (host charge monthly of how many hard drives connected to server) is there anyway to just move the whole os to a bigger hard drive...

8. Solaris

Key Points when Moving from Server A to Server B??

Hi Everyone, I'm still learning daily about UNIX (specifically Solaris 10). I'm tasked with moving my current application and database from Datacenter A to Datacenter B. There will be no updates and no changes other than a new server and new location. So far, I have Solaris...

9. Programming

Problem with Perl script after moving from a Windows/Apache Server to a UNIX server.

I have a Perl script that worked fine before moving it to justhost.com. It was on a Windows/Apache server. Just host is using UNIX. Other Perl scripts on other sites that were also moved work fine so I know Perl is functioning. The script is called cwrmail.pl and is located in my cgi-bin. When I...

10. Red Hat

Moving boot SSD from a dead server to a new server

Hi all, We have a disk array that has the boot drive on an OCZ SSD on a PCIe card. Well, the motherboard died and we got a new motherboard. We moved the controllers, NICs, etc, to the exact same slots on the new motherboard, except now it won't boot. I guess it doesn't recognize the OS on the...

LEARN ABOUT OSF1

disklabel

disklabel(4)						     Kernel Interfaces Manual						      disklabel(4)

NAME

       disklabel - Disk pack label

SYNOPSIS

       #include <sys/disklabel.h>

DESCRIPTION

       Each disk or disk pack on a system may contain a disk label which provides detailed information about the geometry of the disk and the par-
       titions into which the disk is divided.	It should be initialized when the disk is formatted, and may be changed later with  the  disklabel
       program.   This	information is used by the system disk driver and by the bootstrap program to determine how to program the drive and where
       to find the file systems on the disk partitions.  Additional information is used by the file system in order to use  the  disk  most  effi-
       ciently	and  to locate important file system information.  The description of each partition contains an identifier for the partition type
       (standard file system, swap area, etc.).  The file system updates the in-core copy of the label if it contains incomplete information about
       the file system.

       The label is located in sector number LABELSECTOR of the drive, usually sector 0 (zero) where it may be found without any information about
       the disk geometry.  It is at an offset LABELOFFSET from the beginning of the sector, to allow room for the  initial  bootstrap.	 The  disk
       sector  containing  the	label  is normally made read-only so that it is not accidentally overwritten by pack-to-pack copies or swap opera-
       tions; the DIOCWLABEL ioctl, which is done as needed by the disklabel program, allows modification of the label sector.

       A copy of the in-core label for a disk can be obtained with the DIOCGDINFO ioctl; this works with a file descriptor for a block or  charac-
       ter  (raw)  device for any partition of the disk.  The in-core copy of the label is set by the DIOCSDINFO ioctl.  The offset of a partition
       cannot generally be changed, nor made smaller while it is open.	One exception is that any change is allowed if no label was found  on  the
       disk,  and  the	driver was able to construct only a skeletal label without partition information.  Finally, the DIOCWDINFO ioctl operation
       sets the in-core label and then updates the on-disk label; there must be an existing label on the  disk	for  this  operation  to  succeed.
       Thus,  the  initial  label for a disk or disk pack must be installed by writing to the raw disk.  All of these operations are normally done
       using the disklabel program.

RELATED INFORMATION

       Files: disktab(4)

       Commands: disklabel(8) delim off

																      disklabel(4)

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Moving from one web server to another

Discussion started by: lcurrie

2. UNIX for Dummies Questions & Answers

moving files from one server to another

Discussion started by: uniksbro

3. Solaris

Do I need to reboot Solaris 10 server for changes in /etc/systems ?

Discussion started by: neel.gurjar

4. AIX

moving to new server

Discussion started by: sullivjp