I have a shell script that I am pulling different zip file packages and totaling how many of each type of package is in the directory. I get a bogus total count of one in the middle of my output file (highlighted in RED) and not sure why, also would like to get a grand total of all files but not... (2 Replies)
I have been running some tests with solaris mpxio, dual-pathed to HDS SAN storage.
When I take a path offline, Solaris recognised this and a path is shown as offline in luxadm display <device>. However, it does not recover on reinstatement of the path until I run cfgadm -al.
Any ideas?
Phil (3 Replies)
Hi Everybody,
I have the following example file...
199|TST-GURGAON|GURGAON|1
199|TST-GURGAON|GURGAON|1
199|TST-GURGAON|GURGAON|1
199|TST-GURGAON|GURGAON|1
199|TST-GURGAON|GURGAON|1
199|TST-GURGAON|GURGAON|1
199|TST-GURGAON|GURGAON|1
199|TST-GURGAON|GURGAON|1
199|TST-GURGAON|GURGAON|1... (8 Replies)
Hi,
I have an Oracle/Sun T3-2 Server with a duel SAS controller Fujitsu DX60 array attached.
I have 2 x SAS HBA's in the T3-2. One HBA cabled to CM0 and one HBA cabled to CM1 of the array.
The array is setup with one RAID GROUP and one VOLUME and one LUN
In Solaris I can see one device... (4 Replies)
Hi Friends,
Need help regarding counting the word "friend" in files test1.txt and test2.txt. ( there is no gap/space between word )
cat test1.txt
himynameisrajandiamfriendofrajeshfriend
wouldyouliketobemyfriend.
cat test2.txt
himynameisdostandiamfriendofdostfriend... (2 Replies)
Hi,
Can someone tell me the command to do this in solaris 5.10 please? I've trawled around the internet for ages but all I can find is the AIX command...
Thanks (2 Replies)
Hi All,
When i give ls -ltr i get 'total 10' like this along with files long listing. is there any option in ls command to remove this line or do we need use head -1 command only.
$ls -ltr
total 45
-rw-r--r-- 1 abc g1 0 Jul 17 07:20 0
-rw-r--r-- 1 abc g1 744 May 9 12:10 a
-rw-r--r--... (1 Reply)
Hi all,
I have found another post threads talking about count duplicate lines, but I am interested in obtain the total number of duplicates. For example:
#file.txt
a1
a2
a1
a3
a1
a2
a4
a5
#out
3 (lines are duplicates)
Thank you! (12 Replies)
I have the following file:
A1 4.5807 6.4202
B1 2.5704 11.4414
C1 5.5607 5.28872
D1 3.5807 8.2132
E1 3.2206 9.13153
F1 3.0907 9.51532
G1 3.2707 8.99165
H1 2.4607 11.9515
A2 2.5505 11.5307
B2 2.3106 12.7279
C2 3.8507 7.63731
D2 2.6208 11.2214
E2 2.7609 10.652
F2 2.0604 14.2734
G2... (2 Replies)
Discussion started by: Xterra
2 Replies
LEARN ABOUT OSF1
raid
SCSI(7) Miscellaneous Information Manual SCSI(7)NAME
SCSI, RAID - Small Computer System Interface
SYNOPSIS
dsk#, tape#_d#, cdrom#
DESCRIPTION
The operating system interfaces to disk and tape devices through the Small Computer System Interface (SCSI). SCSI support is limited to
the Compaq-supplied storage devices and certain third-party devices. To determine which named devices are supported in the default system,
refer to the file /etc/ddr.dbase. For example, the following devices are listed therein: Winchester disks: RZ24L, RZ25, RZ25L, RZ25M,
RZ28M, RZ29B, RZ55, RZ56, RZ58, RZ73, RZ74, RX23, RX26, RX33, IOMEGA ZIP, RAID (Redundant Arrays of Independent Disks) SCSI controllers:
HSZ10, HSZ40, HSZ80 Magnetic tapes: TZ30, TZK11, TLZ06, TKZ09, TKZ60, DLT8000, SDT-10000 Media Changers: TL800, ESL9000 Optical disks:
RRD42, RRD43, RRD44
Vendors can add their own devices to ddr.dbase.
Refer to the Software Product Description (SPD) for a given release of the operating system for more information on processor-specific
device support.
Under the operating system, a SCSI device is referred to by a device identifier that is assigned by the operating system. This name has no
relationship to the descriptive name of the device, although in previous releases of the operating system disks such as the RZ74 mapped to
a system-assigned rz# logical name (where # was the instance number of that disk.
Current logical names for SCSI disks and tapes take the forms specified in the rz(8) and tz(7) reference pages, such as dsk? and tape?.
Refer to the dsfmgr(8) reference page for the naming conventions for disks, tapes and other devices, such as CD-ROM readers. Refer to the
hwmgr(8) reference page for information on determining device names and other device data.
SCSI Device Limits
The number of possible target device IDs is determined by the controller type and method of connection, such as a multibus connection using
fibre channel. Refer to the emx(7) reference page for an example of device addressing.
Device Special Files
The dsfmgr command creates device special files for all the devices that are attached to SCSI controllers. This event occurs automatically
on system startup, and no administrative intervention is required unless an event requires that a device be renamed or its I/O be reas-
signed. In such cases, you can use dsfmgr and hwmgr to manage SCSI devices and their associated device special files without the need to
calculate values from their Bus, Target ID, and LUN data.
RESTRICTIONS
The SCSI device driver is not warrantied to operate with optical disks other than the devices listed in /etc/ddr.dbase/. The SCSI driver
attempts to support, on a best-effort basis, disks and magnetic tapes supplied by other vendors.
The following notes apply to the driver's handling of disks from other vendors: These disks are identified using the following command: #
hwmgr -get attribute -a name This command will return the device name SCSI-WWID (World-Wide Identifier) for all devices on the system,
which includes the model name of the device. You can filter the output by specifying categories of devices. Disks are assigned a default
partition table. The default table can be modified by editing the ccmn_rzxx_sizes[8] entry in the /usr/sys/data/cam_data.c file. The
disklabel command can also be used to modify the partition table on an RZxx disk.
RELATED INFORMATION atapi_ide(7), dsfmgr(8), emx(7), hwmgr(8), rz(7), tz(7), disklabel(8), ddr.dbase(4) delim off
SCSI(7)