06-20-2018
It seems to me your problem is because of the firewall in between that is interfering with NFS communication. I think that the reason that you are having more problems with nfs_use_reserved_ports=1 is that there are fewer ports in the pool and you are therefore more likely to reuse a port that the Netapp SVM thinks is still in use. I think this can happen when the firewall interferes with normal communication and therefore the Netapp SVM has not learned that a port is no longer in use.
The firewall is probably configured to drop, rather than reject packets, so that is something that you could look into. Another thing to investigate is keep-alive signals and timeouts, to ensure that the firewall does not interfere..
That being said, it may be that your particular brand just does not work well with NFS, no matter what you try.
I am guessing that you are using a firewall to limit which systems are allowed to approach the filer, but I think it would be better if you put the firewall around the systems and the storage SVM so that there is a clear path between them, while also limiting which servers can approach the SVM.
Last edited by Scrutinizer; 06-20-2018 at 03:18 PM..
This User Gave Thanks to Scrutinizer For This Post:
9 More Discussions You Might Find Interesting
1. AIX
Hi Guys,
i am trying to open a port in AIX.
but i am not able to get the command for this. AIX is not having the iptables file present.
So please any body can tell me how to open a port in AIX...
Thanks
sanju (2 Replies)
Discussion started by: sanju_d1231
2 Replies
2. Programming
Hi,
I am working with sun Solaris 5.9 and in my application,I have to communicate with Serial port(i.e /dev/term/a).
So I need source code to by which I can do the following things--
1)check the port is available or not.If it dosn't find the port,it should throw the error message(i.e. port not... (0 Replies)
Discussion started by: smartgupta
0 Replies
3. UNIX for Advanced & Expert Users
In general for intalling a package like we do
./configure, make , make install
But if we want to integrate the package with a huge source base
what are the things to be taken care
could some one have a light on purpose of ./configure , make and make install
along with above question.
I... (1 Reply)
Discussion started by: Gopi Krishna P
1 Replies
4. AIX
Hi,
I was looking on Google for AIX-VIO/LPAR with ISCSI solution and found following really nice tutorial about how to setup ISCSI with free NAS.
1) Build Your Own Open Source NAS Device Using FreeNAS | Train Signal Training - Free Computer Training Videos
2) Build Your Own Open Source... (4 Replies)
Discussion started by: kabir
4 Replies
5. AIX
Hello all. I have never had any issues like this when compiling applications from source. When I try to compile samba-3.5.0pre2, configure runs with no issues, but when the time comes to make, this happens:
make: make 1254-025 There must be an existing description file or specify a target.
... (4 Replies)
Discussion started by: raidzero
4 Replies
6. AIX
Hello Gurus,
I was trying to find who's using my port and got below answer from a IBM website. But the problem with the below answer is I need a root to run the rmsock, is there any other alternative to find out who is using my port with out a root access??
1. netstat -Aan | grep <port... (1 Reply)
Discussion started by: tenderfoot
1 Replies
7. Programming
Hi all,
I need to change the source port number of an outgoing TCP packet. First I have to bind the socket to a particular port(suppose 9001) but when I send the TCP packet I want to change the source port number lets say to 9002 still letting the socket to be bound to the same old port (9001).... (0 Replies)
Discussion started by: anuragrai134
0 Replies
8. AIX
Please send me link for XVFB Source package for AIX (3 Replies)
Discussion started by: prathap.g
3 Replies
9. UNIX for Advanced & Expert Users
Hello all,
I need your help with any command to release a port on AIX.
Thanks for all. (5 Replies)
Discussion started by: Mcipamo
5 Replies
LEARN ABOUT CENTOS
firewalld.conf
FIREWALLD.CONF(5) firewalld.conf FIREWALLD.CONF(5)
NAME
firewalld.conf - firewalld configuration file
SYNOPSIS
/etc/firewalld/firewalld.conf
DESCRIPTION
firewalld.conf is loaded by firewalld during the initialization process. The file contains the basic configuration options for firewalld.
OPTIONS
These are the options that can be set in the config file:
DefaultZone
This sets the default zone for connections or interfaces if the zone is not selected or specified by NetworkManager, initscripts or
command line tool. The default zone is public.
MinimalMark
For some firewall settings several rules are needed in different tables to be able to handle packets in the correct way. To achieve
that these packets are marked using the MARK target iptables(8) and ip6tables(8). With the MinimalMark option a block of marks can be
reserved for private use; only marks over this value are used. The default MinimalMark value is 100.
CleanupOnExit
If firewalld stops, it cleans up all firewall rules. Setting this option to no or false leaves the current firewall rules untouched.
The default value is yes or true.
Lockdown
If this option is enabled, firewall changes with the D-Bus interface will be limited to applications that are listed in the lockdown
whitelist (see firewalld.lockdownwhitelist(5)). The default value is no or false.
SEE ALSO
firewall-applet(1), firewalld(1), firewall-cmd(1), firewall-config(1), firewalld.conf(5), firewalld.direct(5), firewalld.icmptype(5),
firewalld.lockdown-whitelist(5), firewall-offline-cmd(1), firewalld.richlanguage(5), firewalld.service(5), firewalld.zone(5),
firewalld.zones(5)
NOTES
firewalld home page at fedorahosted.org:
http://fedorahosted.org/firewalld/
More documentation with examples:
http://fedoraproject.org/wiki/FirewallD
AUTHORS
Thomas Woerner <twoerner@redhat.com>
Developer
Jiri Popelka <jpopelka@redhat.com>
Developer
firewalld 0.3.9 FIREWALLD.CONF(5)