Take the following example, where i'm using files but it's the same with real devices.
This will tolerate 1 to 2 device failures.
If two devices fail from one top level vdev (mirror-N) you will lose data.
I would strongly suggest using odd number of disks and keeping one hot spare in pool.
In your configuration, get one more disk if you really love your data.
I tried rebooting my Sun server just a few minutes ago and I got the following at boot:
--
Sun Fire 280R (UltraSPARC-III+) , No Keyboard
Copyright 1998-2002 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.5, 1024 MB memory installed, Serial #xxxxxxxxx
Ethernet address... (6 Replies)
Actually have a few different issues, wondering if I could get input on (tried reading/searching for an answer, with no luck)
1. Have a v240 running sol9 that needs a bad disk replaced. So, here are the steps I took:
a. detached from mirroring
b. cleared mirroring (metaclear)
c.... (4 Replies)
All,
Here is the situation. Four 72GB hard drive installed on Sun V-240 server. HDD3 has gone bad. The server will not boot up completely. It keeps booting into single user mode. FSCK has been run and it did not fix the problem. I believe the harddrive is bad and needs to be replaced.
The... (1 Reply)
I have had a little issue with one of my disks, the usb cacble was pulled out and one of the external drives on it would no longer mount. I used First Aid and it verified and repaired both OK / nothing to do). After lots of messing around and not being able to mount I used Drive Genius 2 and that... (1 Reply)
Hello,
I'm brand new to Sun/Solaris.
I have a Sun Blade 150, with SunOS 5.8.
I wanted to make a backup to prevent future data loss, so I put the disk in a normal PC with Windows XP to try to make a backup with Norton Ghost, the disk was detected, but not the file volume, so I place the disk... (6 Replies)
Originally Posted by panos83
Hello there Sir,
according to this old post,
https://www.unix.com/sco/100001-warni...ler-found.html
i try to restore an old image to a new hard disk drive.
The problem is that i don't have basic information such as:
1) Which btld driver do i... (3 Replies)
Scenario1:
VG00 lvm,not mirrored,2 disk of 36GB vg size
VG00 size is under 30G.
Is possible to remove a disk of 36GB and replace "on fly"
with a disk of 300GB on VG00?
Thanks (6 Replies)
This is first time post...found this forum when looking for possible solution to fix my sun pc. Just one day can't boot it already showing the following:
Boot device: disk File args:
Bad magic number in disk label
Can't open disk label package
Evaluating: boot
Can't open boot device... (40 Replies)
Hi Guys,
I have fresh new installed VIO 2.2.3.70 on a p710, 3 physical SAS disks, rootvg on hdisk0
and 3 VIO clients through vscsi, AIX7.1tl4 AIX6.1tl9 RHEL6.5ppc, each lpar has its rootvg installed on a LV on datavg (hdisk2) mapped to vhost0,1,2
There is no vg on hdisk1, I use it for my... (1 Reply)
Discussion started by: frenchy59
1 Replies
LEARN ABOUT DEBIAN
test-filter-module
TEST-FILTER-MODULE(1p) User Contributed Perl Documentation TEST-FILTER-MODULE(1p)NAME
test-filter-module - A tester for Courier::Filter modules
VERSION
0.18
SYNOPSIS
test-filter-module module [options] message [+control ...] [...]
DESCRIPTION
This is a tester for Courier::Filter modules. It sets up the specified Courier::Filter::Module::module filter module, using any supplied
options, and then queries the filter module for consideration of the given message file and zero or more control files. More than one
message/control files tuple may also be specified, in which case the filter module is applied to each message and its respective control
file(s). Filter module options must be specified in the format -option=expr, where expr may be any valid Perl expression.
EXAMPLES
test-filter-module DNSBL -zones='["bl.foo.org", "bl.bar.org"]' test.rfc2822 +test.control
Applies the Courier::Filter::Module::DNSBL filter module to the test.rfc2822/test.control message/control file tuple (taking the
sending machine's IP address from the control file), using the blacklist DNS zones "bl.foo.org" and "bl.bar.org".
SEE ALSO
Courier::Filter::Overview, Courier::Filter
For AVAILABILITY, SUPPORT, and LICENSE information, see Courier::Filter::Overview.
AUTHOR
Julian Mehnle <julian@mehnle.net>
perl v5.14.2 2011-12-27 TEST-FILTER-MODULE(1p)