Add two different subnet public IPs to single NIC or two different NIC on same box Post: 303018439

9 More Discussions You Might Find Interesting

1. IP Networking

How to put 2 IPs on a single NIC

Hi ! I've just got a real IP number for my personal computer. Until now, the IP was masked (NAT'ed). Anyway, the problem is like this : I'm on a LAN with about 100 computers and I asked the admin to give me a real IP so that I can connect to my computer from my office. He gived that IP to me, but...

2. Solaris

Sun box's NIC speed setting

Is there a way to check if my Sun box's network interface card is set to 10 or 100 Mbps? Thanks!

3. HP-UX

how can I determine which NIC card is virtual NIC Card

how can I determine which NIC card is virtual NIC Card which condition can make a decision Does HP UX have Virtual Network Adapter Concept if ,it has where I can Find if I Install Virutal Network Adapter or which command that i can get it or which software can generate thanks

4. Solaris

x86 Solaris 10 nic driver added but not attached. NIC is not detected.

I couldn't install my nic in solaris 10. I compiled and added the driver but failed to attach the driver and ifconfig output shows only loopback dev. Please see the following output and tell me whether my nic has been detected and why the driver failed to attach? My nic is detected in linux...

5. IP Networking

squid proxy: one NIC for inbound & one NIC for outbound?

I am new in squid proxy. My question is how to (and if it's necessary) to set one NIC for inbound traffic (http requests) and one NIC for outbound traffic (http answers)? Thank you in advance!

6. Red Hat

I want to tune NIC's rps, rfs and xps value. which NIC device should I modify.

Dear All I want tune my NIC's rps, rfs and xps value. In my system I have two NIC (eth0, eth1) and I have a bond0 ( eth0, eth1). Here is the question? Which device should I modify ? eth0 and eth1? or just modify bond0 or modify all device (eth0, eth1, bond0) Any advice is welcome....

7. Solaris

Solaris 11 2nd nic for different subnet

I have a Solaris 11 machine with 2 network cables attached. The first one is the default route and is working okay. I am trying to activate the second on another subnet, but am sure missing something. The first one is on 10.30.128. and with it everything works fine, but when I try to add the...

8. Solaris

Solaris 2nd nic for different subnet

posted this on the other sub-forum https://www.unix.com/unix-for-dummies-questions-and-answers/246504-solaris-11-2nd-nic-different-subnet.html apologies if linking is not appropriate Thanks for your help.

9. UNIX for Advanced & Expert Users

Changing single path NIC to a teamed connection in same subnet

Dear all, I have a remote CentOS7 server that has two network cards. Each card has four ports and port one of card one was defined with the IP address assigned to the server. So far, so good and it's been working for over a year. We have now got cables sorted out so there are four paths...

LEARN ABOUT DEBIAN

genrbox

GENBOX(1)						      General Commands Manual							 GENBOX(1)

NAME

       genrbox - generate a RADIANCE description of a box

SYNOPSIS

       genrbox mat name xsiz ysiz zsiz [ -i ][ -r rad | -b bev ]

DESCRIPTION

       Genbox  produces  a  RADIANCE  scene  description of a parallelepiped with one corner at the origin and the opposite corner at (xsiz, ysiz,
       zsiz).  The sides of the box will be parallel to the three coordinate planes.  The surfaces that make up the box will be  modified  by  mat
       and  their  identifiers	will  begin  with  name.  The -i option can be used to produce a box with inward directed surface normals.  The -r
       option can be used to specify the radius for rounded edges.  The -b option can be used to specify the indentation for beveled edges.

EXAMPLE

       To produce a rectangular box made of wood with beveled edges:

	 genrbox wood box1 5 8 3 -b .5 > box1

AUTHOR

       Greg Ward

BUGS

       Because spheres and cylinders are used to construct boxes with rounded edges, a transparent box of this type appears quite messy.

SEE ALSO

       genrev(1), gensurf(1), genworm(1), rpict(1), rvu(1), xform(1)

RADIANCE
							     11/15/93								 GENBOX(1)