I've attached a jpg of the screen. I've also ordered a new Intel Pro/100+ network card to put into the alternate computer--the Realtek LAN card is really the only I/O device which is different from the original computer. I'll post again when I receive and install the new LAN card--I hope that will solve the problem.
Hi guys,
May I know how to install Solaris 8 in the way that I can triple boot it with my the other two OS: WIndows ME and Windows 2000 Pro.
Can you all please kindly advise me on how to setup the triple boot process inorder to allow Windows ME to be the default OS when being ask to choose... (1 Reply)
I have a RH 7.3 server that needs a restart today after putting a patch in place. The last time I rebooted this box was almost a year ago and when the uptime is quite long, Linux likes to check all the disks for errors, including the RAID. This adds almost 1.5Hrs to my bootup process:eek: .
Does... (1 Reply)
Hello there
I need to run a script whenever i reboot or startup my HP-UX server. This script adds some routes to the route table, and it start third party aplications like "Star Manager".
I thought i could do this simply putting the script in "/sbin/init.d,
and a link to the script in... (7 Replies)
Hi all
The following error was displayed when a sco server (5.0.5) was booted. What should be done to overcome the problem. Replies appreciated.
Bios 03.0
0130688 KB memory good
01 processor(s) in system
remote console dialing on, please wait
connect fail : modem off
cpu clock... (6 Replies)
Hi i installed ssh of version v 1.21 and my AIX is of 5.3.
I want to start my ssh deamon at the startup
can any one please help me out reg..
Thanks in advance.. (1 Reply)
Hi,
I've got a recent problem with 2 file systems on an AIX 5.3 server. The fs's are marked to auto mount at startup and do show as being mounted after a a restart however if you cd to the mount point and 'df -g .' it shows the fs hasn't actually mounted.
$ mount |grep SQLT0001.0
... (2 Replies)
Hi,
I am using a Linux system running at run level 3. I am finding a wired problem, once the system boots, the system terminal slows down, I need to type the characters repeatedly to enter my login and password info. Also running any commands takes time, it stays in this condition for some... (1 Reply)
Hi Folks,
Has anyone seen these errors on bootup.
Mar 15 12:22:30 svc.startd: svc:/system/device/local:default: Method "/lib/svc/method/devices-local" failed due to signal SEGV.ht (c) 1983, 2010,
Oracle and/or its affiliates. All rights reserved.
Configuring devices. ... (1 Reply)
Discussion started by: ESSTEAM
1 Replies
LEARN ABOUT NETBSD
trm
TRM(4) BSD Kernel Interfaces Manual TRM(4)NAME
trm -- Tekram TRM-S1040 ASIC based PCI SCSI host adapter driver
SYNOPSIS
trm* at pci? dev ? function ?
scsibus* at trm?
DESCRIPTION
The trm driver supports PCI SCSI host adapters based on the Tekram TRM-S1040 SCSI ASIC.
HARDWARE
Supported SCSI controllers include:
Tekram DC-315 PCI Ultra SCSI adapter without flash BIOS and internal SCSI connector
Tekram DC-315U PCI Ultra SCSI adapter without flash BIOS
Tekram DC-395U PCI Ultra SCSI adapter with flash BIOS
Tekram DC-395UW PCI Ultra-Wide SCSI adapter with flash BIOS
Tekram DC-395F PCI Ultra-Wide SCSI adapter with flash BIOS and 68-pin external SCSI connector
For Tekram DC-390 PCI SCSI host adapter, use pcscp(4) driver.
For Tekram DC-310/U and DC-390U/UW/F PCI SCSI host adapters, use siop(4) driver.
SEE ALSO cd(4), ch(4), intro(4), pci(4), scsi(4), sd(4), ss(4), st(4), uk(4), scsipi(9)
http://www.tekram.com/
AUTHORS
The trm driver was originally written for NetBSD 1.4/i386 by Erich Chen of Tekram Technology, and Rui-Xiang Guo rewrote the driver to use
bus_space(9) and bus_dma(9) for NetBSD 1.6.
BSD November 6, 2001 BSD