Does anyone know a good driver site. If you've heard of driverguide.com or driversearch.com please do not reccomend them because I already know them. I need to know where to get Motherboard drivers for a homemade computer. If there is any info that you need to know feel free to make a reply.
:) (5 Replies)
Hello,
I read and search through this wonderful forum and tried different approaches but it seems I lack some knowledge and neurones ^^
Here is what I'm trying to achieve :
file1:
test filea 3495;
test fileb 4578;
test filec 7689;
test filey 9978;
test filez 12300;
file2:
test filea... (11 Replies)
Hello,
I got a computer in which I decided to change RAM memory cards.
These (2) RAMs are:
Brand: Crucial Technology DDR Ram 266 Mhz
and when I ran memtest86 tool, both of them have errors.
So I decided to change them and purchase a new ones.
I bought:
Brand: Patriot DDR RAM 512 Mb 266... (2 Replies)
Hi,
Can anyone please advise how I can reset my BIOS password on my BL460c-class blade?
I need to make some changes but do not know what the password has been set to. This is a newly purchased server so any default I can try may be useful.
R,
D. (3 Replies)
Hi,
I have to get into BIOS and disable onbaord NICS for an IBM server, can someone please help me out.
I tried hitting F1 when reboot to get into BIOS, but it seems like a setup screen and I dont see any option to disable NICS?
Thanks
Sam (2 Replies)
Hi friends,
I hope you are doing well. Can you please tell me which part of the motherboard contains the BIOS software, name that exact location. And could please give me the names of the firmwares for atleast 5 archetictures, like sun sparc, ibm power, hp alpha etc.
Looking forward to your... (0 Replies)
okay,i made a grave mistake in installing the base bare bones install of debian.
here i have edited this from the original.
this morning when i got home from work i did some searching and then just shut the system down via the mechanical off on switch. waited a few minutes and then restarted... (0 Replies)
I have a problem with a brand new Dell laptop. BioLinux was installed on it without making the necessary changes on BIOS. The installation was completed successfully but the BIOS system cant find the OS after rebooting the machine.
I have tried to modify the BIOS setting with no luck this far. I... (7 Replies)
Discussion started by: Xterra
7 Replies
LEARN ABOUT MOJAVE
systemd-volatile-root.service
SYSTEMD-VOLATILE-ROOT.SERVICE(8) systemd-volatile-root.service SYSTEMD-VOLATILE-ROOT.SERVICE(8)NAME
systemd-volatile-root.service, systemd-volatile-root - Make the root file system volatile
SYNOPSIS
systemd-volatile-root.service
/lib/systemd/systemd-volatile-root
DESCRIPTION
systemd-volatile-root.service is a service that replaces the root directory with a volatile memory file system ("tmpfs"), mounting the
original (non-volatile) /usr inside it read-only. This way, vendor data from /usr is available as usual, but all configuration data in
/etc, all state data in /var and all other resources stored directly under the root directory are reset on boot and lost at shutdown,
enabling fully stateless systems.
This service is only enabled if full volatile mode is selected, for example by specifying "systemd.volatile=yes" on the kernel command
line. This service runs only in the initial RAM disk ("initrd"), before the system transitions to the host's root directory. Note that this
service is not used if "systemd.volatile=state" is used, as in that mode the root directory is non-volatile.
SEE ALSO systemd(1), systemd-fstab-generator(8), kernel-command-line(7)systemd 237 SYSTEMD-VOLATILE-ROOT.SERVICE(8)