01-20-2018
Hi,
Port 514 is the port for the syslog service, as you seem to have already determined. However, in those instances where a local logging service is configured to listen for incoming connections on port 514 it almost always uses UDP rather than TCP, so you can't test this by attempting to telnet to the port.
Exactly how you'd configure this all to work depends on your exact version of UNIX/your Linux distribution, what software you're using for logging, and of course if there is some external firewall that could be in the way even if your own local firewall definitely is not. But the best way to test it is to try to generate a logged event on a remote system that you have configured to log to your syslog server, and see if something gets logged or not.
This User Gave Thanks to drysdalk For This Post:
10 More Discussions You Might Find Interesting
1. Linux
Hello,
I am ltrying to find the config file to modify a parameter for apache (I guess). Here, when sending mail using php web form I get a copy of all mail sent from that form, but here is a sample of what I get :
From : apache@localhost.localdomain
To : myemail@host.com
Subject : Mail ... (2 Replies)
Discussion started by: qfwfq
2 Replies
2. UNIX for Advanced & Expert Users
hello guys,
this morning when I start my pc (gentoo) I get some strange errors about localhost.
"Could not determine the server's fully qualified domain name, using 127.0.0.1 for ServerName" ... Apache
the same for my aplications, I have to use the full address of my pc instead of... (1 Reply)
Discussion started by: georgeplus
1 Replies
3. Ubuntu
Hi folks,
Ubuntu 7.04 server amd64
On running;
$ telnet localhost 106
Trying 127.0.0.1...
telnet: Unable to connect to remote host: Connection refused
$ netstat -an | grep 106
$ sudo netstat -an | grep 106
both no printout
Pls advise where shall I check and how to fix... (22 Replies)
Discussion started by: satimis
22 Replies
4. Shell Programming and Scripting
Somewhat long story:
I have a simple Perl CGI script that uses Expect to Telnet to a device and grab some data, and then spits it back to Perl for display on the Webpage.
This works for many devices I've tried, but one device just fails, it keeps rejecting the password on this device, only... (1 Reply)
Discussion started by: jondo
1 Replies
5. UNIX for Dummies Questions & Answers
I'm trying to connect to my linux server but I'm having some major problems. The server had OEL 5 installed and my local pc is running Windows XP. I'm using PuTTy to connect to the server with Xming running on my loacl machine. I login as root and run the following command -
export... (5 Replies)
Discussion started by: garethnsolomons
5 Replies
6. UNIX for Advanced & Expert Users
Hi,
I have these entries in the /etc/esolv.conf:
------------
domain xxxxxx
search yyyyyy
nameserver 127.0.0.1
nameserver aaaaaaaaaaaaaaaa
nameserver bbbbbbbbbbbbbbbb
-------------
When I use 'dig' or 'nslookup' command, like 'dig yahoo.com' it uses the localhost as the server.
I... (2 Replies)
Discussion started by: chaandana
2 Replies
7. Solaris
Hi All!
I having an issue when trying to run snmpwalk, so the following command it returns an error:
bash-3.00# /usr/sfw/bin/snmpwalk -v 2c -c public localhost sysDescr.0
Timeout: No Response from localhost
bash-3.00#
I have checked also:
bash-3.00# svcs -a | grep sma
online ... (2 Replies)
Discussion started by: fretagi
2 Replies
8. Debian
I am getting the message - waiting for localhost.
Here are some diagnostic steps I have tried ....
root@meow:/home/ethan# cat /var/www/cgi-bin/httpd.conf
ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/jkj
ServerName 127.0.0.1:80
Listen xx.xx.xx.xx:80
Listen 127.0.0.1:80
... (1 Reply)
Discussion started by: Meow613
1 Replies
9. Shell Programming and Scripting
I get a "not found" error from this
localhost/choice.php
ethan@meow:~$ ping 127.0.0.1
PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data.
64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.025 ms
64 bytes from 127.0.0.1: icmp_seq=2 ttl=64 time=0.036 m
and this
ethan@meow:~$ mysql -u... (4 Replies)
Discussion started by: Meow613
4 Replies
10. Shell Programming and Scripting
Morning and Happy New Year to all.
I am in a situation where I need to connect to a list of devices that are using either telnet or ssh.
I want to try to telnet, if I receive any of the following I want to attempt ssh :
"Connection refused"
"Connection timed out"
timeout expiration
... (3 Replies)
Discussion started by: popeye
3 Replies
LEARN ABOUT CENTOS
telnet-probe
TELNET-PROBE(1) General Commands Manual TELNET-PROBE(1)
NAME
telnet-probe - lightweight telnet-like port probe
SYNOPSIS
$PCP_BINADM_DIR/telnet-probe [-c] [-v] host port
DESCRIPTION
telnet-probe allows the pmdashping(1) daemons to establish connections to arbitrary local and remote service-providing daemons so that
response time and service availability information can be obtained.
The required host and port number arguments have the same meaning as their telnet(1) equivalents.
The -c option causes telnet-probe to perform a connect(2) only. This skips the read(2) and write(2) exercise that would otherwise be done
after connecting (see below).
The -v option causes telnet-probe to be verbose while operating.
Once the telnet connection has been established, telnet-probe reads from stdin until end-of-file, and writes all the input data to the tel-
net connection. Next, telnet-probe will read from the telnet connection until end-of-file, discarding whatever data it receives. Then
telnet-probe exits.
To operate successfully, the input passed via telnet-probe to the remote service must be sufficient to cause the remote service to close
the connection when the last line of input has been processed, e.g. ending with ``quit'' when probing SMTP on port 25.
By default telnet-probe will not produce any output, unless there is an error in which case a diagnostic message can be displayed (in ver-
bose mode only) and the exit status will be non-zero indicating a failure.
PCP ENVIRONMENT
Environment variables with the prefix PCP_ are used to parameterize the file and directory names used by PCP. On each installation, the
file /etc/pcp.conf contains the local values for these variables. The $PCP_CONF variable may be used to specify an alternative configura-
tion file, as described in pcp.conf(5).
DIAGNOSTICS
If telnet-probe succeeds, then 0 will be returned. If the attempt to establish a connection fails or is terminated, then a non-zero exit
status is returned.
SEE ALSO
PCPintro(1), pmdashping(1), pmie(1), telnet(1), connect(2), read(2) and write(2).
Performance Co-Pilot PCP TELNET-PROBE(1)