Ah.. I was looking at
without the drive mounted to /a. the
on the
d drive matches.
The machine had to be shut down over the weekend. So I booted from CDROM and mounted S0 to /a
When I reboot the machine, it still keeps rebooting. I'm getting something very similar to this:
It goes by too fast. I found that somewhere else so it doesn't match exactly but its close.
Hi guys,
I am a new member here. This is my first post.
I try to purchase some new Blade 2500 for the
company. However, the vendor suggests me to get Blade 2000 instead. The vendor said he has many problems
with new Silver Blade 2500's. Has anyone here had
simlar experience with blade 2500?... (4 Replies)
Hi, Sir,
I have a customer who use a SB2000 as server and just upgraded three client machine with SB2500.
The system is used for planning and all boxes likely share the same source on server, so pretty slow when all machines are in operation.
The customer wish to do a server-to-client and... (0 Replies)
Hi everyone this is my first post
I have used linux a couple of times and was impressed, so i bought an old sunblade 1000, just to learn something new.
I cannot get the thing to work! I have tried to install solaris 10 and several types of linux. I am beginning to wonder if i was sold a... (3 Replies)
Progress! 25% there on our way 10,000 FB fans on the new timeline:
https://www.unix.com/members/neo-albums-forum-pics-picture503-facebook-timeline-now-over-2-500-fans.png (0 Replies)
Hi,
I recently got StoragaTek 2500 and I would like to connect it to my solaris machine, since I don't have much experience with storages, could someone point me how to do so, how can i present disks from storage on my solaris os? (everything is already connected)
thanks in advance (1 Reply)
Hello All,
I am new to the forum so forgive me for any mistakes. I have a question. I have been doing alot of reading about how to get a supportable operating system on my sunblade 2500. I also want to use it for Xorg. I have been having trouble getting the sun XVR drivers working... (2 Replies)
hello everyone,
I am new to linux and got this deliverable to write a script that should check for error in multiple log file (count is approx 2500 log files on single server) and once error is found, it should mail that error
My logic says:
we can put all log files path/location in one... (2 Replies)
Good Morning,
I took a mirror drive from one Solaris 9 machine and used it to set up another. After syncing another mirror on the second machine I restarted but I don't get a login screen.
I see a message:The X-server cannot be started on display :0
Also during startup I see:... (8 Replies)
Discussion started by: Stellaman1977
8 Replies
LEARN ABOUT DEBIAN
irsend
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)