Before we go looking at potential password issues there are a few things to checkout first.
Currently NFS comes in three versions, 3,4 and 5. They need to be matched between communicating nodes. Also, we may be being denied write access but we don't need write to do a restore.
So lets try:
and try vers=4 and vers=5 too.
The -r means we will accept a readonly connection.
Try all combinations and see what happens.
Yes, some NAS can be configured to require a password but that is unlikely in this case if you didn't need one to mount for the dump.
No luck on any of those. Is there a way to add username and password to the command? (I manage the NAS)
Also.. my handle is a path like
does that sound right?
Hi there,
I have a problem at the moment trying to restore a directory from a Super DLT tape with about 3 weeks worth of backups on it. I need to be able to get the last backup performed on this tape but using ufsrestore -i it only restores the first backup which is no good to me. There is... (4 Replies)
on sparc solaris 2.8 hosts, HOSTB, after changing to /dir1 need to:
connect to tape drive on HostA. change directory to /dir0/dir1 on tape and
restore everything under that path to /dir1 directory.
could i get help?. (1 Reply)
I'm trying to restore a server from a backup tape. I've partitioned my drive, and I've run into a problem; After extracting everything from the tape, It seems as if only the directory structure is intact. Here are my steps:
1. booted from cdrom to single user mode boot cdrom -s
2. used... (3 Replies)
HI Gurus,
I have a sunfire V445 server running SAP ECC 6.0 with an Oracle database on Solaris 9 (SunOS 5.9). I recently completed a ufsdump to tape of the following files:-
/,
/usr,
/oracle,
/export,
/sapr3,
I want to restore these files from tape onto a different server of the same... (5 Replies)
Hi , I accidentally deleted crontab entries and I need to restore back urgently ! we use a ufsdump with 0cfu option. I like to know how to restrore / retrieve to different location for crontab file only from the backup. Thanks. (4 Replies)
hey all,
i did a ufsdump/restore from a mirrored system and i'm not able to get the new system to boot off of the dump.
system 1 is a v245 mirrored with disk suite. metadb's are in place
d3 -m d23 d13 d33 1
d23 1 1 c1t1d0s3
d13 1 1 c1t0d0s3
d33 1 1 c1t2d0s3
d0 -m d20 d10 d30 1
d20 1... (3 Replies)
hi, on my sol9 box i create my backup using the below command:
/usr/sbin/ufsdump 0uf /dev/rmt/0n /u1
/usr/sbin/ufsdump 0uf /dev/rmt/0n /u2
/usr/sbin/ufsdump 0uf /dev/rmt/0n /u3
/usr/sbin/ufsdump 0uf /dev/rmt/0n /u4
now on the new sol10 box, to restore i use this commands:
cd /u1... (3 Replies)
Hi Friends
we have sun T5240 server, we have taken ufsdump of this server remotely with scsi tapedrive, If we need to do ufsrestore means what we have to do, since T5240 has not having scsi port, any procedure is there?
Regards
Rajasekar (5 Replies)
Good Morning,
I'm running through a Solaris 9 ufsrestore process on a Sunblade 2500 that folks here helped me write a year ago. Here: https://www.unix.com/303011447-post11.html
Hicksd8 tells me to # rm restoresymtable. I see this file in the other slices as well. Do I remove it from... (8 Replies)
Discussion started by: Stellaman1977
8 Replies
LEARN ABOUT BSD
mount.nfs
MOUNT.NFS(8) System Manager's Manual MOUNT.NFS(8)NAME
mount.nfs, mount.nfs4 - mount a Network File System
SYNOPSIS
mount.nfs remotetarget dir [-rvVwfnsh ] [-o options]
DESCRIPTION
mount.nfs is a part of nfs(5) utilities package, which provides NFS client functionality.
mount.nfs is meant to be used by the mount(8) command for mounting NFS shares. This subcommand, however, can also be used as a standalone
command with limited functionality.
remotetarget is a server share usually in the form of servername:/path/to/share. dir is the directory on which the file system is to be
mounted.
Under Linux 2.6.32 and later kernel versions, mount.nfs can mount all NFS file system versions. Under earlier Linux kernel versions,
mount.nfs4 must be used for mounting NFSv4 file systems while mount.nfs must be used for NFSv3 and v2.
OPTIONS -r Mount file system readonly.
-v Be verbose.
-V Print version.
-w Mount file system read-write.
-f Fake mount. Don't actually call the mount system call.
-n Do not update /etc/mtab. By default, an entry is created in /etc/mtab for every mounted file system. Use this option to skip making
an entry.
-s Tolerate sloppy mount options rather than fail.
-h Print help message.
nfsoptions
Refer to nfs(5) or mount(8) manual pages.
NOTE
For further information please refer nfs(5) and mount(8) manual pages.
FILES
/etc/fstab file system table
/etc/mtab table of mounted file systems
SEE ALSO nfs(5), mount(8),
AUTHOR
Amit Gud <agud@redhat.com>
5 Jun 2006 MOUNT.NFS(8)