Do you have some install media that you can use to bring up an OS just in memory?
Something like:-
If you can get that running, then you can try to look at the devices you have available. Alternately, you might try something like:-
It has been a long time since I had a Sun Sparc to work with, so things may well have changed. You can get some basic help at the ok> prompt. This looks like a hardware issue, or perhaps it is trying to pick up SAN provided disk that has been de-configured.
Can you tell us a bit more about what you have and why you don't have a password for root. Some people choose to have is randomly set regularly, but you should include a secure place to store it should the need (like this) arise. We might be able to get you in if you have console access, install media and the correct disks available.
Hi, i was installing solaris 8 on sunfire v250 and the power fails :mad: , now it does not boot from cd rom and get the next msg:
ð
Sun Fire V120 (UltraSPARC-IIe 648MHz), No Keyboard
OpenBoot 4.0, 512 MB memory installed, Serial #56338483.
Ethernet address 0:3:ba:5b:a8:33, Host ID: 835ba833.
... (1 Reply)
I have a machine running HP-UX 11.23 (PARISC) and APA startup fails on boot. This is found in /etc/rc.log:
Configure Auto-Port Aggregation(LAN Monitor) interfaces
Output from "/sbin/rc2.d/S343hplm start":
----------------------------
get_start_dlpi_version: failed, errno is 22
ERROR: ... (1 Reply)
Hi i 've a M5000 running 2 domains in my Lab with following hardconf
SPARC Enterprise M5000; Memory_Size:128 GB;
+-----------------------------------+------------+
| FRU | Quantity |
+-----------------------------------+------------+
| MBU_B... (3 Replies)
Hi,
I am trying to setup a server for a diskless boot of a computer class (with ubuntu)
I followed the guidelines in https://help.ubuntu.com/community/DisklessUbuntuHowto
I have two computers: one is the server I installed and the other is my macbook on which I run a virtual machine... (8 Replies)
Good evening all,I'm new to your site, so please bear any infringements or transgressions on my part.I'm new to the whole Solaris boot install over the net scenario, but here's where I'm stuck:I have an M5000 with 2 domains (running unimode). Domain 0 is configured and running Solaris 10. Domain 1... (9 Replies)
One of our T5220 servers fail to boot due to following error:
ERROR: The following devices are disabled:
XAUI1
XAUI0
I can't see any disabled components in SP console, any idea what is the problem? (1 Reply)
I have a T2000 enterprise SPARC server that's no longer on contract with Oracle. It's on old firmware (6.3.x). After a power-down this weekend, it won't boot normally. Boot snapshot at the bottom of the post.
It can boot to cdrom, and it'll boot to failsafe mode, but it won't do a regular... (9 Replies)
I took over an M5000 and have a jumper server with a nic to connect to the console IP of an M5000. access via ssh user@ip.
it was working fine, another person can connect remotely on the subnet, but when I ssh,it just hangs and then times out.
so my question is,
any ideas of what I might... (4 Replies)
My OS solarius 5.10 Generic_147148-2 i86
Error: please review new boots environments using options
1. Solution - show me the commands
Partition is full, try to remove some unneeded files,
then try to compress some other unneeded files.
man command creates a temp file under... (0 Replies)
My system suddenly crash and when it rebooted there was an error:
/dev/rdsk/c1t0d0s3 is logging
svc.startd: svc:/network/nis/client:default: Method "/method/yp" failed with status 96.
The system completes booting however when I log in a user account / directory is not longer... (1 Reply)
Discussion started by: NeedSolarisHelp
1 Replies
LEARN ABOUT DEBIAN
paps
PAPS(1) General Commands Manual PAPS(1)NAME
paps - UTF-8 to PostScript converter using Pango
SYNOPSIS
paps [options] files...
DESCRIPTION
paps reads a UTF-8 encoded file and generates a PostScript language rendering of the file. The rendering is done by creating outline curves
through the pango ft2 backend.
OPTIONS
These programs follow the usual GNU command line syntax, with long options starting with two dashes (`-'). A summary of options is
included below.
--landscape
Landscape output. Default is portrait.
--columns=cl
Number of columns output. Default is 1.
Please notice this option isn't related to the terminal length as in a "80 culums terminal".
--font=desc
Set the font description. Default is Monospace 12.
--rtl Do right to left (RTL) layout.
--paper ps
Choose paper size. Known paper sizes are legal, letter and A4. Default is A4.
Postscript points
Each postscript point equals to 1/72 of an inch. 36 points are 1/2 of an inch.
--bottom-margin=bm
Set bottom margin. Default is 36 postscript points.
--top-margin=tm
Set top margin. Default is 36 postscript points.
--left-margin=lm
Set left margin. Default is 36 postscript points.
--right-margin=rm
Set right margin. Default is 36 postscript points.
--gutter-width=gw
Set gutter width. Default is 40 postscript points.
--help Show summary of options.
--header
Draw page header for each page.
--markup
Interpret the text as pango markup.
--lpi Set the lines per inch. This determines the line spacing.
--cpi Set the characters per inch. This is an alternative method of specifying the font size.
--stretch-chars
Indicates that characters should be stretched in the y-direction to fill up their vertical space. This is similar to the texttops
behaviour.
AUTHOR
paps was written by Dov Grobgeld <dov.grobgeld@gmail.com>.
This manual page was written by Lior Kaplan <kaplan@debian.org>, for the Debian project (but may be used by others).
April 17, 2006 PAPS(1)